| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Int 13h function AH=Dh, Reset Hard Disk (Alternate reset).
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing code
|
|---|
| 5 | SECTION .text
|
|---|
| 6 |
|
|---|
| 7 | ;--------------------------------------------------------------------
|
|---|
| 8 | ; Int 13h function AH=Dh, Reset Hard Disk (Alternate reset).
|
|---|
| 9 | ;
|
|---|
| 10 | ; AHDh_HandlerForResetHardDisk
|
|---|
| 11 | ; Parameters:
|
|---|
| 12 | ; AH: Bios function Dh
|
|---|
| 13 | ; DL: Drive number
|
|---|
| 14 | ; Returns:
|
|---|
| 15 | ; AH: Int 13h return status
|
|---|
| 16 | ; CF: 0 if succesfull, 1 if error
|
|---|
| 17 | ; IF: 1
|
|---|
| 18 | ; Corrupts registers:
|
|---|
| 19 | ; Flags
|
|---|
| 20 | ;--------------------------------------------------------------------
|
|---|
| 21 | ALIGN JUMP_ALIGN
|
|---|
| 22 | AHDh_HandlerForResetHardDisk:
|
|---|
| 23 | %ifndef USE_186
|
|---|
| 24 | call AHDh_ResetDrive
|
|---|
| 25 | jmp Int13h_PopDiDsAndReturn
|
|---|
| 26 | %else
|
|---|
| 27 | push Int13h_PopDiDsAndReturn
|
|---|
| 28 | ; Fall through to AHDh_ResetDrive
|
|---|
| 29 | %endif
|
|---|
| 30 |
|
|---|
| 31 |
|
|---|
| 32 | ;--------------------------------------------------------------------
|
|---|
| 33 | ; Resets hard disk.
|
|---|
| 34 | ;
|
|---|
| 35 | ; AHDh_ResetDrive
|
|---|
| 36 | ; Parameters:
|
|---|
| 37 | ; DL: Drive number
|
|---|
| 38 | ; DS: RAMVARS segment
|
|---|
| 39 | ; Returns:
|
|---|
| 40 | ; AH: Int 13h return status
|
|---|
| 41 | ; CF: 0 if succesfull, 1 if error
|
|---|
| 42 | ; Corrupts registers:
|
|---|
| 43 | ; DI
|
|---|
| 44 | ;--------------------------------------------------------------------
|
|---|
| 45 | ALIGN JUMP_ALIGN
|
|---|
| 46 | AHDh_ResetDrive:
|
|---|
| 47 | push dx
|
|---|
| 48 | push cx
|
|---|
| 49 | push bx
|
|---|
| 50 | push ax
|
|---|
| 51 |
|
|---|
| 52 | call FindDPT_ForDriveNumber ; DS:DI now points to DPT
|
|---|
| 53 | call Interrupts_UnmaskInterruptControllerForDriveInDSDI
|
|---|
| 54 | call AHDh_ResetMasterAndSlave
|
|---|
| 55 | ;jc SHORT .ReturnError ; CF would be set if slave drive present without master
|
|---|
| 56 | ; (error register has special values after reset)
|
|---|
| 57 |
|
|---|
| 58 | ; Initialize Master and Slave drives
|
|---|
| 59 | mov dx, [RAMVARS.wIdeBase] ; Load base port address
|
|---|
| 60 | call AHDh_InitializeMasterAndSlave
|
|---|
| 61 |
|
|---|
| 62 | pop bx ; Pop old AX
|
|---|
| 63 | mov al, bl ; Restore AL
|
|---|
| 64 | pop bx
|
|---|
| 65 | pop cx
|
|---|
| 66 | pop dx
|
|---|
| 67 | ret
|
|---|
| 68 |
|
|---|
| 69 |
|
|---|
| 70 | ;--------------------------------------------------------------------
|
|---|
| 71 | ; Resets Master and Slave drives at wanted port.
|
|---|
| 72 | ; Both IDE drives will be reset. It is not possible to reset
|
|---|
| 73 | ; Master or Slave only.
|
|---|
| 74 | ;
|
|---|
| 75 | ; AHDh_ResetMasterAndSlave
|
|---|
| 76 | ; Parameters:
|
|---|
| 77 | ; DS:DI: Ptr to DPT for Master or Slave drive
|
|---|
| 78 | ; Returns:
|
|---|
| 79 | ; CF: 0 if reset succesfull
|
|---|
| 80 | ; 1 if any error
|
|---|
| 81 | ; Corrupts registers:
|
|---|
| 82 | ; AX, BX, CX, DX
|
|---|
| 83 | ;--------------------------------------------------------------------
|
|---|
| 84 | ALIGN JUMP_ALIGN
|
|---|
| 85 | AHDh_ResetMasterAndSlave:
|
|---|
| 86 | ; Reset controller
|
|---|
| 87 | ; HSR0: Set_SRST
|
|---|
| 88 | mov al, [di+DPT.bDrvCtrl] ; Load value for ACR
|
|---|
| 89 | or al, FLG_IDE_CTRL_SRST ; Set Reset bit
|
|---|
| 90 | call HDrvSel_OutputDeviceControlByte
|
|---|
| 91 | mov ax, 5 ; Delay at least 5us
|
|---|
| 92 | call HTimer_MicrosecondsFromAX
|
|---|
| 93 |
|
|---|
| 94 | ; HSR1: Clear_wait
|
|---|
| 95 | mov al, [di+DPT.bDrvCtrl] ; Load value for ACR
|
|---|
| 96 | out dx, al ; End Reset
|
|---|
| 97 | mov ax, 2000 ; Delay at least 2ms
|
|---|
| 98 | call HTimer_MicrosecondsFromAX
|
|---|
| 99 |
|
|---|
| 100 | ; HSR2: Check_status
|
|---|
| 101 | mov cl, B_TIMEOUT_RESET ; Reset timeout delay
|
|---|
| 102 | jmp HStatus_WaitBsy
|
|---|
| 103 |
|
|---|
| 104 |
|
|---|
| 105 | ;--------------------------------------------------------------------
|
|---|
| 106 | ; Initializes Master and Slave drive.
|
|---|
| 107 | ;
|
|---|
| 108 | ; AHDh_InitializeMasterAndSlave
|
|---|
| 109 | ; Parameters:
|
|---|
| 110 | ; DX: IDE Base Port address
|
|---|
| 111 | ; Returns:
|
|---|
| 112 | ; AH: Error code
|
|---|
| 113 | ; CF: 0 if initialization succesfull
|
|---|
| 114 | ; 1 if any error
|
|---|
| 115 | ; Corrupts registers:
|
|---|
| 116 | ; AL, BX, CX, DX, DI
|
|---|
| 117 | ;--------------------------------------------------------------------
|
|---|
| 118 | ALIGN JUMP_ALIGN
|
|---|
| 119 | AHDh_InitializeMasterAndSlave:
|
|---|
| 120 | push dx ; Store base port address
|
|---|
| 121 | xor cx, cx ; Assume no errors
|
|---|
| 122 | call FindDPT_ForIdeMasterAtPort
|
|---|
| 123 | jnc SHORT .InitializeSlave ; Master drive not present
|
|---|
| 124 | call AH9h_InitializeDriveForUse
|
|---|
| 125 | mov cl, ah ; Copy error code to CL
|
|---|
| 126 | .InitializeSlave:
|
|---|
| 127 | pop dx ; Restore base port address
|
|---|
| 128 | call FindDPT_ForIdeSlaveAtPort
|
|---|
| 129 | jnc SHORT .CombineErrors ; Slave drive not present
|
|---|
| 130 | call AH9h_InitializeDriveForUse
|
|---|
| 131 | mov ch, ah ; Copy error code to CH
|
|---|
| 132 | .CombineErrors:
|
|---|
| 133 | or cl, ch ; OR error codes, clear CF
|
|---|
| 134 | jz SHORT .Return
|
|---|
| 135 | mov ah, RET_HD_RESETFAIL ; Load Reset Failed error code
|
|---|
| 136 | stc
|
|---|
| 137 | .Return:
|
|---|
| 138 | ret
|
|---|
