[3] | 1 | ; File name : AHDh_HReset.asm
|
---|
| 2 | ; Project name : IDE BIOS
|
---|
| 3 | ; Created date : 9.12.2007
|
---|
| 4 | ; Last update : 12.4.2010
|
---|
| 5 | ; Author : Tomi Tilli
|
---|
| 6 | ; Description : Int 13h function AH=Dh, Reset Hard Disk (Alternate reset).
|
---|
| 7 |
|
---|
| 8 | ; Section containing code
|
---|
| 9 | SECTION .text
|
---|
| 10 |
|
---|
| 11 | ;--------------------------------------------------------------------
|
---|
| 12 | ; Int 13h function AH=Dh, Reset Hard Disk (Alternate reset).
|
---|
| 13 | ;
|
---|
| 14 | ; AHDh_HandlerForResetHardDisk
|
---|
| 15 | ; Parameters:
|
---|
| 16 | ; AH: Bios function Dh
|
---|
| 17 | ; DL: Drive number
|
---|
| 18 | ; Returns:
|
---|
| 19 | ; AH: Int 13h return status
|
---|
| 20 | ; CF: 0 if succesfull, 1 if error
|
---|
| 21 | ; IF: 1
|
---|
| 22 | ; Corrupts registers:
|
---|
| 23 | ; Flags
|
---|
| 24 | ;--------------------------------------------------------------------
|
---|
| 25 | ALIGN JUMP_ALIGN
|
---|
| 26 | AHDh_HandlerForResetHardDisk:
|
---|
| 27 | push dx
|
---|
| 28 | push cx
|
---|
| 29 | push bx
|
---|
| 30 | push ax
|
---|
| 31 | call AHDh_ResetDrive
|
---|
| 32 | jmp Int13h_PopXRegsAndReturn
|
---|
| 33 |
|
---|
| 34 |
|
---|
| 35 | ;--------------------------------------------------------------------
|
---|
| 36 | ; Resets hard disk.
|
---|
| 37 | ;
|
---|
| 38 | ; AHDh_ResetDrive
|
---|
| 39 | ; Parameters:
|
---|
| 40 | ; DL: Drive number
|
---|
| 41 | ; DS: RAMVARS segment
|
---|
| 42 | ; Returns:
|
---|
| 43 | ; AH: Int 13h return status
|
---|
| 44 | ; CF: 0 if succesfull, 1 if error
|
---|
| 45 | ; Corrupts registers:
|
---|
| 46 | ; AL, BX, CX, DX
|
---|
| 47 | ;--------------------------------------------------------------------
|
---|
| 48 | ALIGN JUMP_ALIGN
|
---|
| 49 | AHDh_ResetDrive:
|
---|
| 50 | push di
|
---|
| 51 | call FindDPT_ForDriveNumber ; DS:DI now points to DPT
|
---|
| 52 | call AHDh_ResetMasterAndSlave
|
---|
| 53 | ;jc SHORT .ReturnError ; CF would be set if slave drive present without master
|
---|
| 54 | ; (error register has special values after reset)
|
---|
| 55 |
|
---|
| 56 | ; Initialize Master and Slave drives
|
---|
| 57 | mov dx, [RAMVARS.wIdeBase] ; Load base port address
|
---|
| 58 | call AHDh_InitializeMasterAndSlave
|
---|
| 59 | jc SHORT .ReturnError
|
---|
| 60 | xor ax, ax ; Clear AH since success
|
---|
| 61 | pop di
|
---|
| 62 | ret
|
---|
| 63 | .ReturnError:
|
---|
| 64 | mov ah, RET_HD_RESETFAIL ; Load Reset Failed error code
|
---|
| 65 | pop di
|
---|
| 66 | ret
|
---|
| 67 |
|
---|
| 68 |
|
---|
| 69 | ;--------------------------------------------------------------------
|
---|
| 70 | ; Resets Master and Slave drives at wanted port.
|
---|
| 71 | ; Both IDE drives will be reset. It is not possible to reset
|
---|
| 72 | ; Master or Slave only.
|
---|
| 73 | ;
|
---|
| 74 | ; AHDh_ResetMasterAndSlave
|
---|
| 75 | ; Parameters:
|
---|
| 76 | ; DS:DI: Ptr to DPT for Master or Slave drive
|
---|
| 77 | ; Returns:
|
---|
| 78 | ; CF: 0 if reset succesfull
|
---|
| 79 | ; 1 if any error
|
---|
| 80 | ; Corrupts registers:
|
---|
| 81 | ; AX, BX, CX, DX
|
---|
| 82 | ;--------------------------------------------------------------------
|
---|
| 83 | ALIGN JUMP_ALIGN
|
---|
| 84 | AHDh_ResetMasterAndSlave:
|
---|
| 85 | ; Reset controller
|
---|
| 86 | ; HSR0: Set_SRST
|
---|
| 87 | mov al, [di+DPT.bDrvCtrl] ; Load value for ACR
|
---|
| 88 | or al, FLG_IDE_CTRL_SRST ; Set Reset bit
|
---|
| 89 | call HDrvSel_OutputDeviceControlByte
|
---|
| 90 | mov cx, 5 ; Delay at least 5us
|
---|
| 91 | call SoftDelay_us
|
---|
| 92 |
|
---|
| 93 | ; HSR1: Clear_wait
|
---|
| 94 | and al, ~FLG_IDE_CTRL_SRST ; Clear Reset bit
|
---|
| 95 | out dx, al ; End Reset
|
---|
| 96 | mov cx, 2000 ; Delay at least 2ms
|
---|
| 97 | call SoftDelay_us
|
---|
| 98 |
|
---|
| 99 | ; HSR2: Check_status
|
---|
| 100 | mov cl, B_TIMEOUT_RESET ; Reset timeout delay
|
---|
| 101 | mov dx, [RAMVARS.wIdeBase] ; Load base port address
|
---|
| 102 | jmp HStatus_WaitBsyBase
|
---|
| 103 |
|
---|
| 104 |
|
---|
| 105 | ;--------------------------------------------------------------------
|
---|
| 106 | ; Initializes Master and Slave drive.
|
---|
| 107 | ;
|
---|
| 108 | ; AHDh_InitializeMasterAndSlave
|
---|
| 109 | ; Parameters:
|
---|
| 110 | ; DX: IDE Base Port address
|
---|
| 111 | ; Returns:
|
---|
| 112 | ; CF: 0 if initialization succesfull
|
---|
| 113 | ; 1 if any error
|
---|
| 114 | ; Corrupts registers:
|
---|
| 115 | ; AX, BX, CX, DX, DI
|
---|
| 116 | ;--------------------------------------------------------------------
|
---|
| 117 | ALIGN JUMP_ALIGN
|
---|
| 118 | AHDh_InitializeMasterAndSlave:
|
---|
| 119 | push dx ; Store base port address
|
---|
| 120 | xor cx, cx ; Assume no errors
|
---|
| 121 | call FindDPT_ForIdeMasterAtPort
|
---|
| 122 | jnc SHORT .InitializeSlave ; Master drive not present
|
---|
| 123 | call AH9h_InitializeDriveForUse
|
---|
| 124 | mov cl, ah ; Copy error code to CL
|
---|
| 125 | ALIGN JUMP_ALIGN
|
---|
| 126 | .InitializeSlave:
|
---|
| 127 | pop dx ; Restore base port address
|
---|
| 128 | call FindDPT_ForIdeSlaveAtPort
|
---|
| 129 | jnc SHORT .CombineErrors ; Slave drive not present
|
---|
| 130 | call AH9h_InitializeDriveForUse
|
---|
| 131 | mov ch, ah ; Copy error code to CH
|
---|
| 132 | ALIGN JUMP_ALIGN
|
---|
| 133 | .CombineErrors:
|
---|
| 134 | or cl, ch ; OR error codes, clear CF
|
---|
| 135 | jnz SHORT .ReturnError
|
---|
| 136 | ret
|
---|
| 137 | .ReturnError:
|
---|
| 138 | stc
|
---|
| 139 | ret
|
---|