source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH9h_HInit.asm@ 623

Last change on this file since 623 was 618, checked in by Krister Nordvall, 3 years ago

Changes:

  • Updated the BIOS makefile. Added the NO_ATAID_CORRECTION define back to the Tiny build as I've realized that the correction code should not be needed for builds without MODULE_EBIOS. Also added a new makefile target 'custom' to make it easier for people to make custom builds.
  • Fixed a bug where calling INT 13h/AH=15h for drives not handled by XUB (floppy drives for example) would return an error due to the fact that any non-zero return value in AH from the other BIOS would cause the CF to be set in Int13h_SetErrorCodeToIntpackInSSBPfromAH. The return path is now via Int13h_ReturnFromHandlerWithoutStoringErrorCode which means that no status/error code will be returned in the BDA but that should not be a problem as the other BIOS should do that anyway. This change also fixed another potential problem where return values in DL from the other BIOS were assumed to be drive numbers when MODULE_SERIAL_FLOPPY is included in the build.
  • Minor optimizations and fixes.
File size: 9.7 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Int 13h function AH=9h, Initialize Drive Parameters.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; STORE_ERROR_FLAG_TO_DPT
25; Parameters:
26; %1: Error flag to set
27; AH: BIOS Error Code
28; DS:DI: Ptr to DPT
29; CF: Set if error code in AH
30; Returns:
31; CF: Clear if no error
32; Set if error flag was set
33; Corrupts registers:
34; Nothing
35;--------------------------------------------------------------------
36%macro STORE_ERROR_FLAG_TO_DPT 1
37 mov al, %1
38 call SetErrorFlagFromALwithErrorCodeInAH
39%endmacro
40
41
42;--------------------------------------------------------------------
43; Int 13h function AH=9h, Initialize Drive Parameters.
44;
45; AH9h_HandlerForInitializeDriveParameters
46; Parameters:
47; DL: Translated Drive number
48; DS:DI: Ptr to DPT (in RAMVARS segment)
49; SS:BP: Ptr to IDEPACK
50; Returns with INTPACK:
51; AH: Int 13h return status
52; CF: 0 if successful, 1 if error
53;--------------------------------------------------------------------
54AH9h_HandlerForInitializeDriveParameters:
55%ifndef USE_186
56 call AH9h_InitializeDriveForUse
57 jmp Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
58%else
59 push Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
60 ; Fall to AH9h_InitializeDriveForUse
61%endif
62
63
64;--------------------------------------------------------------------
65; Initialize drive to be ready for use.
66;
67; AH9h_InitializeDriveForUse
68; Parameters:
69; DS:DI: Ptr to DPT (in RAMVARS segment)
70; SS:BP: Ptr to IDEPACK
71; Returns:
72; AH: Int 13h return status
73; CF: 0 if successful, 1 if error
74; Corrupts registers:
75; AL, CX
76;--------------------------------------------------------------------
77AH9h_InitializeDriveForUse:
78 xor ax, ax ; Clear AH to assume no errors
79
80%ifdef MODULE_ADVANCED_ATA
81 ; Clear Initialization Error flags from DPT
82 mov [di+DPT.bInitError], al
83%endif
84
85%ifdef MODULE_SERIAL
86 ; No need to do this for serial devices
87 test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE ; Clears CF
88 jz SHORT .ContinueInitialization
89 ret ; With AH and CF cleared
90.ContinueInitialization:
91%endif
92
93 push es
94 push si
95 push dx
96 push bx
97
98
99;;; SelectDrive
100 ; Try to select drive and wait until ready
101 call AccessDPT_GetDriveSelectByteToAL
102 mov [bp+IDEPACK.bDrvAndHead], al
103 call Device_SelectDrive
104 STORE_ERROR_FLAG_TO_DPT FLG_INITERROR_FAILED_TO_SELECT_DRIVE
105%ifdef USE_386
106 jc .ReturnWithErrorCodeInAH
107%else
108 jnc SHORT .ContinueInitializationSinceDriveSelectedSuccessfully
109 jmp .ReturnWithErrorCodeInAH
110.ContinueInitializationSinceDriveSelectedSuccessfully:
111%endif
112
113
114%ifdef MODULE_8BIT_IDE_ADVANCED
115;;; Set XT-CF mode
116 call AH1Eh_GetCurrentXTCFmodeToAX
117 call AH9h_SetModeFromALtoXTCF
118 STORE_ERROR_FLAG_TO_DPT FLG_INITERROR_FAILED_TO_SET_XTCF_MODE
119%endif ; MODULE_8BIT_IDE_ADVANCED
120
121%ifdef MODULE_8BIT_IDE
122;;; Set 8-bit PIO mode
123 call AH9h_Enable8bitModeForDevice8bitAta
124 STORE_ERROR_FLAG_TO_DPT FLG_INITERROR_FAILED_TO_SET_8BIT_MODE
125%endif ; MODULE_8BIT_IDE
126
127
128;;; InitializeDeviceParameters
129 ; Initialize Logical Sectors per Track and Max Head number
130 mov ax, [di+DPT.wPchsHeadsAndSectors]
131 dec ax ; Max Head number
132 xchg ah, al
133 mov dl, al ; Sectors per track
134 mov al, COMMAND_INITIALIZE_DEVICE_PARAMETERS
135 mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
136 call Idepack_StoreNonExtParametersAndIssueCommandFromAL
137 STORE_ERROR_FLAG_TO_DPT FLG_INITERROR_FAILED_TO_INITIALIZE_CHS_PARAMETERS
138
139
140;;; SetWriteCache
141 ; Enable or Disable Write Cache
142 call AccessDPT_GetPointerToDRVPARAMStoCSBX
143 mov bl, [cs:bx+DRVPARAMS.wFlags]
144 push bx ; Save .wFlags for later use in InitializeBlockMode
145 and bx, BYTE MASK_DRVPARAMS_WRITECACHE
146 jz SHORT .SkipSetWriteCache ; DEFAULT_WRITE_CACHE
147 mov si, [cs:bx+.rgbWriteCacheCommands]
148 call AH23h_SetControllerFeatures
149 STORE_ERROR_FLAG_TO_DPT FLG_INITERROR_FAILED_TO_SET_WRITE_CACHE
150.SkipSetWriteCache:
151
152
153;;; RecalibrateDrive
154 ; Recalibrate drive by seeking to cylinder 0
155 call AH11h_RecalibrateDrive
156 STORE_ERROR_FLAG_TO_DPT FLG_INITERROR_FAILED_TO_RECALIBRATE_DRIVE
157
158
159;;; InitializeBlockMode
160 ; Initialize block mode transfers
161 pop ax ; Restore .wFlags saved in SetWriteCache
162 test al, FLG_DRVPARAMS_BLOCKMODE ; Tested here so block mode can be enabled with AH=24h
163 jz SHORT .BlockModeDisabled
164
165 ; Try block sizes until we find largest possible supported by drive
166 mov bl, 128
167.TryNextBlockSize:
168 mov al, bl
169 call AH24h_SetBlockSize ; Stores block size to DPT
170 jnc SHORT .SupportedBlockSizeFound
171 shr bl, 1
172 jnc SHORT .TryNextBlockSize
173 STORE_ERROR_FLAG_TO_DPT FLG_INITERROR_FAILED_TO_SET_BLOCK_MODE
174.BlockModeDisabled:
175.SupportedBlockSizeFound:
176
177
178%ifdef MODULE_ADVANCED_ATA
179;;; InitializePioMode
180 ; Initialize fastest supported PIO mode
181 mov dl, PIO_DEFAULT_MODE_DISABLE_IORDY
182 test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_IORDY
183 jz SHORT .IordyNotSupported
184
185 ; Advanced PIO mode 3 and above
186 mov dl, PIO_FLOW_CONTROL_MODE_xxx
187 or dl, [di+DPT_ADVANCED_ATA.bPioMode]
188
189.IordyNotSupported:
190 mov si, FEATURE_SET_TRANSFER_MODE
191 call AH23h_SetControllerFeatures
192 STORE_ERROR_FLAG_TO_DPT FLG_INITERROR_FAILED_TO_SET_PIO_MODE
193%endif ; MODULE_ADVANCED_ATA
194
195
196%ifdef MODULE_POWER_MANAGEMENT
197;;; InitStandbyTimer
198 ; Initialize the standby timer (if supported)
199 mov dh, [di+DPT.bFlagsHigh]
200 test dh, FLGH_DPT_POWER_MANAGEMENT_SUPPORTED
201 jz SHORT .NoPowerManagementSupport
202
203 ; Do we need to disable APM?
204 mov dl, [cs:ROMVARS.bIdleTimeout]
205 push dx
206 test dh, FLGH_DPT_APM_SUPPORTED
207 jz SHORT .NoAdvancedPowerManagementSupport
208 call AH23h_EnableOrDisableAdvancedPowerManagement
209.NoAdvancedPowerManagementSupport:
210
211 ; COMMAND_IDLE is not enough for Toshiba 1,8" HDD since idle mode is the default mode
212 ; COMMAND_STAND_BY seemed to do the trick
213 pop dx
214 push dx
215 mov al, COMMAND_STAND_BY
216 mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
217 call Idepack_StoreNonExtParametersAndIssueCommandFromAL
218 STORE_ERROR_FLAG_TO_DPT FLG_INITERROR_FAILED_TO_INITIALIZE_STANDBY_TIMER
219
220 pop dx
221 mov al, COMMAND_IDLE
222 mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
223 call Idepack_StoreNonExtParametersAndIssueCommandFromAL
224 STORE_ERROR_FLAG_TO_DPT FLG_INITERROR_FAILED_TO_INITIALIZE_STANDBY_TIMER
225.NoPowerManagementSupport:
226%endif ; MODULE_POWER_MANAGEMENT
227
228
229 ; There might have been several errors so just return one error code for them all
230.ReturnWithErrorCodeInAH:
231%ifdef MODULE_ADVANCED_ATA
232 mov ah, [di+DPT.bInitError]
233 test ah, ah ; Clears CF
234 jz SHORT .ReturnWithSuccess
235 mov ah, RET_HD_RESETFAIL
236 stc
237.ReturnWithSuccess:
238%endif
239
240 pop bx
241 pop dx
242 pop si
243 pop es
244 ret
245
246
247.rgbWriteCacheCommands:
248 db 0 ; DEFAULT_WRITE_CACHE
249 db FEATURE_DISABLE_WRITE_CACHE ; DISABLE_WRITE_CACHE
250 db FEATURE_ENABLE_WRITE_CACHE ; ENABLE_WRITE_CACHE
251
252
253
254%ifdef MODULE_8BIT_IDE
255;--------------------------------------------------------------------
256; AH9h_Enable8bitModeForDevice8bitAta
257; Parameters:
258; DS:DI: Ptr to DPT (in RAMVARS segment)
259; SS:BP: Ptr to IDEPACK
260; Returns:
261; AH: Int 13h return status
262; CF: Clear if successful or device is not DEVICE_8BIT_ATA
263; Set if failed to set 8-bit mode for DEVICE_8BIT_ATA
264; Corrupts registers:
265; AL, BX, CX, DX, SI
266;--------------------------------------------------------------------
267AH9h_Enable8bitModeForDevice8bitAta:
268 cmp BYTE [di+DPT_ATA.bDevice], DEVICE_8BIT_ATA
269%ifdef MODULE_8BIT_IDE_ADVANCED
270 jne SHORT IgnoreInvalidCommandError
271 jmp AH23h_Enable8bitPioMode
272%else ; ~MODULE_8BIT_IDE_ADVANCED
273 je AH23h_Enable8bitPioMode
274 ; Fall to IgnoreInvalidCommandError
275%endif ; MODULE_8BIT_IDE_ADVANCED
276%endif ; MODULE_8BIT_IDE
277
278
279%ifdef MODULE_8BIT_IDE_ADVANCED
280;--------------------------------------------------------------------
281; AH9h_SetModeFromALtoXTCF
282; Parameters:
283; AL: XT-CF Mode to set
284; DS:DI: Ptr to DPT (in RAMVARS segment)
285; SS:BP: Ptr to IDEPACK
286; Returns:
287; AH: Int 13h return status
288; CF: Clear if successful or device is not XT-CF
289; Set if failed to set mode for XT-CF
290; Corrupts registers:
291; AL, BX, CX, DX, SI
292;--------------------------------------------------------------------
293AH9h_SetModeFromALtoXTCF:
294 call AccessDPT_IsThisDeviceXTCF
295 jnc AH1Eh_ChangeXTCFmodeBasedOnModeInAL
296 ; Fall to IgnoreInvalidCommandError
297%endif ; MODULE_8BIT_IDE_ADVANCED
298
299
300;--------------------------------------------------------------------
301; SetErrorFlagFromALwithErrorCodeInAH
302; Parameters:
303; AH: BIOS Error Code
304; AL: Error flag to set
305; DS:DI: Ptr to DPT
306; CF: Set if error code in AH
307; Clear if AH = 0
308; Returns:
309; CF: Clear if no error
310; Set if error flag was set
311; Corrupts registers:
312; Nothing
313;--------------------------------------------------------------------
314IgnoreInvalidCommandError:
315 xor ah, ah ; Clears CF
316SetErrorFlagFromALwithErrorCodeInAH:
317 jnc SHORT .NoErrorFlagToSet
318 cmp ah, RET_HD_INVALID
319 jbe SHORT IgnoreInvalidCommandError
320
321 or [di+DPT.bInitError], al
322 stc
323.NoErrorFlagToSet:
324 ret
Note: See TracBrowser for help on using the repository browser.