source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH9h_HInit.asm @ 437

Last change on this file since 437 was 437, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Changed Fast XTIDE to Lo-tech XT-CF
  • 8-bit PIO Transfer mode is enabled for Lo-tech XT-CF
File size: 8.5 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Int 13h function AH=9h, Initialize Drive Parameters.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; STORE_ERROR_FLAG_TO_DPT
25;   Parameters:
26;       %1:     Error flag to set
27;       AH:     BIOS Error Code
28;       DS:DI:  Ptr to DPT
29;       CF:     Set if error code in AH
30;   Returns:
31;       CF:     Clear if no error
32;               Set if error flag was set
33;   Corrupts registers:
34;       Nothing
35;--------------------------------------------------------------------
36%macro STORE_ERROR_FLAG_TO_DPT 1
37    mov     al, %1
38    call    SetErrorFlagFromALwithErrorCodeInAH
39%endmacro
40
41
42;--------------------------------------------------------------------
43; Int 13h function AH=9h, Initialize Drive Parameters.
44;
45; AH9h_HandlerForInitializeDriveParameters
46;   Parameters:
47;       DL:     Translated Drive number
48;       DS:DI:  Ptr to DPT (in RAMVARS segment)
49;       SS:BP:  Ptr to IDEPACK
50;   Returns with INTPACK:
51;       AH:     Int 13h return status
52;       CF:     0 if successful, 1 if error
53;--------------------------------------------------------------------
54AH9h_HandlerForInitializeDriveParameters:
55%ifndef USE_186
56    call    AH9h_InitializeDriveForUse
57    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
58%else
59    push    Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
60    ; Fall to AH9h_InitializeDriveForUse
61%endif
62
63
64;--------------------------------------------------------------------
65; Initialize drive to be ready for use.
66;
67; AH9h_InitializeDriveForUse
68;   Parameters:
69;       DS:DI:  Ptr to DPT (in RAMVARS segment)
70;       SS:BP:  Ptr to IDEPACK
71;   Returns:
72;       AH:     Int 13h return status
73;       CF:     0 if successful, 1 if error
74;   Corrupts registers:
75;       AL, BX, CX, DX
76;--------------------------------------------------------------------
77AH9h_InitializeDriveForUse:
78    xor     ax, ax              ; Clear AH to assume no errors
79
80%ifdef MODULE_ADVANCED_ATA
81    ; Clear Initialization Error flags from DPT
82    mov     [di+DPT.bInitError], al
83%endif
84
85%ifdef MODULE_SERIAL
86    ; No need to do this for serial devices
87    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE    ; Clears CF
88    jz      SHORT .ContinueInitialization
89    ret     ; With AH and CF cleared
90.ContinueInitialization:
91%endif
92
93    push    es
94    push    si
95
96
97;;; SelectDrive
98    ; Try to select drive and wait until ready
99    call    AccessDPT_GetDriveSelectByteForOldInt13hToAL
100    mov     [bp+IDEPACK.bDrvAndHead], al
101    call    Device_SelectDrive
102    STORE_ERROR_FLAG_TO_DPT     FLG_INITERROR_FAILED_TO_SELECT_DRIVE
103    jnc     SHORT .ContinueInitializationSinceDriveSelectedSuccesfully
104    jmp     .ReturnWithErrorCodeInAH
105.ContinueInitializationSinceDriveSelectedSuccesfully:
106
107
108;;; InitializeDeviceParameters
109    ; Initialize CHS parameters if LBA is not used and
110    ; user has specified P-CHS parameters
111    test    BYTE [di+DPT.bFlagsLow], FLGL_DPT_ASSISTED_LBA
112    jnz     SHORT .SkipInitializeDeviceParameters       ; No need to initialize CHS parameters if LBA mode enabled
113    call    AccessDPT_GetPointerToDRVPARAMStoCSBX
114    test    BYTE [cs:bx+DRVPARAMS.wFlags], FLG_DRVPARAMS_USERCHS    ; User specified P-CHS?
115    jz      SHORT .SkipInitializeDeviceParameters
116
117    ; Initialize Logical Sectors per Track and Max Head number
118    mov     ax, [cs:bx+DRVPARAMS.wHeadsAndSectors]
119    dec     ax                          ; Max Head number
120    xchg    al, ah                      ; Heads now in AH
121    mov     dx, ax                      ; Sectors per Track now in DL
122    mov     al, COMMAND_INITIALIZE_DEVICE_PARAMETERS
123    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
124    call    Idepack_StoreNonExtParametersAndIssueCommandFromAL
125    STORE_ERROR_FLAG_TO_DPT     FLG_INITERROR_FAILED_TO_INITIALIZE_CHS_PARAMETERS
126.SkipInitializeDeviceParameters:
127
128
129;;; Enable 8-bit PIO Transfer Mode for Lo-tech XT-CF (CF and Microdrives only)
130    call    AH9h_Enable8bitPioModeForXTCF
131    STORE_ERROR_FLAG_TO_DPT     FLG_INITERROR_FAILED_TO_ENABLE_8BIT_PIO_MODE
132
133
134;;; SetWriteCache
135    ; Enable or Disable Write Cache
136    call    AccessDPT_GetPointerToDRVPARAMStoCSBX
137    mov     bl, [cs:bx+DRVPARAMS.wFlags]
138    push    bx  ; Save .wFlags for later use in InitializeBlockMode
139    and     bx, BYTE MASK_DRVPARAMS_WRITECACHE
140    jz      SHORT .SkipSetWriteCache        ; DEFAULT_WRITE_CACHE
141    mov     si, [cs:bx+.rgbWriteCacheCommands]
142    call    AH23h_SetControllerFeatures
143    STORE_ERROR_FLAG_TO_DPT     FLG_INITERROR_FAILED_TO_SET_WRITE_CACHE
144.SkipSetWriteCache:
145
146
147;;; RecalibrateDrive
148    ; Recalibrate drive by seeking to cylinder 0
149    call    AH11h_RecalibrateDrive
150    STORE_ERROR_FLAG_TO_DPT     FLG_INITERROR_FAILED_TO_RECALIBRATE_DRIVE
151
152
153;;; InitializeBlockMode
154    ; Initialize block mode transfers
155    pop     ax  ; Restore .wFlags saved in SetWriteCache
156    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED
157    jz      SHORT .BlockModeNotSupportedOrDisabled
158    test    al, FLG_DRVPARAMS_BLOCKMODE
159    jz      SHORT .BlockModeNotSupportedOrDisabled
160
161    ; Try block sizes until we find largest possible supported by drive
162    mov     bl, 128
163.TryNextBlockSize:
164    mov     al, bl
165    call    AH24h_SetBlockSize  ; Stores block size to DPT
166    jnc     SHORT .SupportedBlockSizeFound
167    shr     bl, 1
168    jnc     SHORT .TryNextBlockSize
169    STORE_ERROR_FLAG_TO_DPT     FLG_INITERROR_FAILED_TO_SET_BLOCK_MODE
170.BlockModeNotSupportedOrDisabled:
171.SupportedBlockSizeFound:
172
173
174%ifdef MODULE_ADVANCED_ATA
175;;; InitializePioMode
176    ; Initialize fastest supported PIO mode
177    mov     dl, PIO_DEFAULT_MODE_DISABLE_IORDY
178    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_IORDY
179    jz      SHORT .IordyNotSupported
180
181    ; Advanced PIO mode 3 and above
182    mov     dl, [di+DPT_ADVANCED_ATA.bPioMode]
183    or      dl, PIO_FLOW_CONTROL_MODE_xxx
184
185.IordyNotSupported:
186    mov     si, FEATURE_SET_TRANSFER_MODE
187    call    AH23h_SetControllerFeatures
188    STORE_ERROR_FLAG_TO_DPT     FLG_INITERROR_FAILED_TO_SET_PIO_MODE
189%endif ; MODULE_ADVANCED_ATA
190
191
192%ifdef MODULE_FEATURE_SETS
193;;; InitStandbyTimer
194    ; Initialize the standby timer (if supported)
195    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_POWER_MANAGEMENT_SUPPORTED
196    jz      SHORT .NoPowerManagementSupport
197
198    mov     al, COMMAND_IDLE
199    mov     dl, [cs:ROMVARS.bIdleTimeout]
200    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
201    call    Idepack_StoreNonExtParametersAndIssueCommandFromAL
202    STORE_ERROR_FLAG_TO_DPT     FLG_INITERROR_FAILED_TO_INITIALIZE_STANDBY_TIMER
203.NoPowerManagementSupport:
204%endif ; MODULE_FEATURE_SETS
205
206
207    ; There might have been several errors so just return one error code for them all
208.ReturnWithErrorCodeInAH:
209%ifdef MODULE_ADVANCED_ATA
210    mov     ah, [di+DPT.bInitError]
211    test    ah, ah  ; Clears CF
212    jz      SHORT .ReturnWithSuccess
213    mov     ah, RET_HD_RESETFAIL
214    stc
215.ReturnWithSuccess:
216%endif
217
218    pop     si
219    pop     es
220    ret
221
222
223.rgbWriteCacheCommands:
224    db      0                               ; DEFAULT_WRITE_CACHE
225    db      FEATURE_DISABLE_WRITE_CACHE     ; DISABLE_WRITE_CACHE
226    db      FEATURE_ENABLE_WRITE_CACHE      ; ENABLE_WRITE_CACHE
227
228
229
230;--------------------------------------------------------------------
231; SetErrorFlagFromALwithErrorCodeInAH
232;   Parameters:
233;       AH:     BIOS Error Code
234;       AL:     Error flag to set
235;       DS:DI:  Ptr to DPT
236;       CF:     Set if error code in AH
237;               Clear if AH = 0
238;   Returns:
239;       CF:     Clear if no error
240;               Set if error flag was set
241;   Corrupts registers:
242;       Nothing
243;--------------------------------------------------------------------
244IgnoreInvalidCommandError:
245    xor     ah, ah  ; Clears CF
246SetErrorFlagFromALwithErrorCodeInAH:
247    jnc     SHORT .NoErrorFlagToSet
248    cmp     ah, RET_HD_INVALID
249    jbe     SHORT IgnoreInvalidCommandError
250
251    or      [di+DPT.bInitError], al
252    stc
253.NoErrorFlagToSet:
254    ret
255
256
257;--------------------------------------------------------------------
258; AH9h_Enable8bitPioModeForXTCF
259;   Parameters:
260;       DS:DI:  Ptr to DPT
261;   Returns:
262;       AH:     Int 13h return status
263;       CF:     0 if successful, 1 if error
264;   Corrupts registers:
265;       AL, BX, CX, DX
266;--------------------------------------------------------------------
267AH9h_Enable8bitPioModeForXTCF:
268    eMOVZX  bx, BYTE [di+DPT.bIdevarsOffset]
269    cmp     BYTE [cs:bx+IDEVARS.bDevice], DEVICE_8BIT_XTCF
270    je      SHORT .Enable8bitMode
271    xor     ah, ah      ; Do nothing for this device
272    ret
273.Enable8bitMode:
274    mov     si, FEATURE_ENABLE_8BIT_PIO_TRANSFER_MODE
275    jmp     AH23h_SetControllerFeatures
Note: See TracBrowser for help on using the repository browser.