| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Int 13h function AH=9h, Initialize Drive Parameters.
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing code
|
|---|
| 5 | SECTION .text
|
|---|
| 6 |
|
|---|
| 7 | ;--------------------------------------------------------------------
|
|---|
| 8 | ; Int 13h function AH=9h, Initialize Drive Parameters.
|
|---|
| 9 | ;
|
|---|
| 10 | ; AH9h_HandlerForInitializeDriveParameters
|
|---|
| 11 | ; Parameters:
|
|---|
| 12 | ; DL: Translated Drive number
|
|---|
| 13 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 14 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 15 | ; Returns with INTPACK:
|
|---|
| 16 | ; AH: Int 13h return status
|
|---|
| 17 | ; CF: 0 if succesfull, 1 if error
|
|---|
| 18 | ;--------------------------------------------------------------------
|
|---|
| 19 | ALIGN JUMP_ALIGN
|
|---|
| 20 | AH9h_HandlerForInitializeDriveParameters:
|
|---|
| 21 | %ifndef USE_186
|
|---|
| 22 | call AH9h_InitializeDriveForUse
|
|---|
| 23 | jmp Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
|
|---|
| 24 | %else
|
|---|
| 25 | push Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
|
|---|
| 26 | ; Fall through to AH9h_InitializeDriveForUse
|
|---|
| 27 | %endif
|
|---|
| 28 |
|
|---|
| 29 |
|
|---|
| 30 | ;--------------------------------------------------------------------
|
|---|
| 31 | ; Initialized drive to be ready for use.
|
|---|
| 32 | ;
|
|---|
| 33 | ; AH9h_InitializeDriveForUse
|
|---|
| 34 | ; Parameters:
|
|---|
| 35 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 36 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 37 | ; Returns:
|
|---|
| 38 | ; AH: Int 13h return status
|
|---|
| 39 | ; CF: 0 if succesfull, 1 if error
|
|---|
| 40 | ; Corrupts registers:
|
|---|
| 41 | ; AL, BX, DX
|
|---|
| 42 | ;--------------------------------------------------------------------
|
|---|
| 43 | ALIGN JUMP_ALIGN
|
|---|
| 44 | AH9h_InitializeDriveForUse:
|
|---|
| 45 | push cx
|
|---|
| 46 |
|
|---|
| 47 | ; Try to select drive and wait until ready
|
|---|
| 48 | or WORD [di+DPT.wFlags], MASK_DPT_RESET ; Everything uninitialized
|
|---|
| 49 | call AccessDPT_GetDriveSelectByteToAL
|
|---|
| 50 | mov [bp+IDEPACK.bDrvAndHead], al
|
|---|
| 51 | call Device_SelectDrive
|
|---|
| 52 | jc SHORT .ReturnNotSuccessfull
|
|---|
| 53 | and WORD [di+DPT.wFlags], ~FLG_DPT_RESET_nDRDY ; Clear since success
|
|---|
| 54 |
|
|---|
| 55 | ; Initialize CHS parameters if LBA is not used
|
|---|
| 56 | call InitializeDeviceParameters
|
|---|
| 57 | jc SHORT .RecalibrateDrive
|
|---|
| 58 | and WORD [di+DPT.wFlags], ~FLG_DPT_RESET_nINITPRMS
|
|---|
| 59 |
|
|---|
| 60 | ; Recalibrate drive by seeking to cylinder 0
|
|---|
| 61 | .RecalibrateDrive:
|
|---|
| 62 | call AH11h_RecalibrateDrive
|
|---|
| 63 | jc SHORT .InitializeBlockMode
|
|---|
| 64 | and WORD [di+DPT.wFlags], ~FLG_DPT_RESET_nRECALIBRATE
|
|---|
| 65 |
|
|---|
| 66 | ; Initialize block mode transfers
|
|---|
| 67 | .InitializeBlockMode:
|
|---|
| 68 | call InitializeBlockMode
|
|---|
| 69 | jc SHORT .ReturnNotSuccessfull
|
|---|
| 70 | and WORD [di+DPT.wFlags], ~FLG_DPT_RESET_nSETBLOCK ; Keeps CF clear
|
|---|
| 71 |
|
|---|
| 72 | .ReturnNotSuccessfull:
|
|---|
| 73 | pop cx
|
|---|
| 74 | ret
|
|---|
| 75 |
|
|---|
| 76 |
|
|---|
| 77 | ;--------------------------------------------------------------------
|
|---|
| 78 | ; InitializeDeviceParameters
|
|---|
| 79 | ; Parameters:
|
|---|
| 80 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 81 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 82 | ; Returns:
|
|---|
| 83 | ; AH: BIOS Error code
|
|---|
| 84 | ; CF: Cleared if succesfull
|
|---|
| 85 | ; Set if any error
|
|---|
| 86 | ; Corrupts registers:
|
|---|
| 87 | ; AL, BX, CX, DX
|
|---|
| 88 | ;--------------------------------------------------------------------
|
|---|
| 89 | ALIGN JUMP_ALIGN
|
|---|
| 90 | InitializeDeviceParameters:
|
|---|
| 91 | ; No need to initialize CHS parameters if LBA mode enabled
|
|---|
| 92 | test BYTE [di+DPT.wFlags], FLG_DRVNHEAD_LBA ; Clear CF
|
|---|
| 93 | jnz SHORT ReturnSuccessSinceInitializationNotNeeded
|
|---|
| 94 |
|
|---|
| 95 | ; Initialize Locigal Sectors per Track and Max Head number
|
|---|
| 96 | mov ah, [di+DPT.bPchsHeads]
|
|---|
| 97 | dec ah ; Max Head number
|
|---|
| 98 | mov dl, [di+DPT.bPchsSectors] ; Sectors per Track
|
|---|
| 99 | mov al, COMMAND_INITIALIZE_DEVICE_PARAMETERS
|
|---|
| 100 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
|
|---|
| 101 | jmp Idepack_StoreNonExtParametersAndIssueCommandFromAL
|
|---|
| 102 |
|
|---|
| 103 |
|
|---|
| 104 | ;--------------------------------------------------------------------
|
|---|
| 105 | ; InitializeBlockMode
|
|---|
| 106 | ; Parameters:
|
|---|
| 107 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 108 | ; Returns:
|
|---|
| 109 | ; AH: BIOS Error code
|
|---|
| 110 | ; CF: Cleared if succesfull
|
|---|
| 111 | ; Set if any error
|
|---|
| 112 | ; Corrupts registers:
|
|---|
| 113 | ; AL, BX, CX, DX
|
|---|
| 114 | ;--------------------------------------------------------------------
|
|---|
| 115 | ALIGN JUMP_ALIGN
|
|---|
| 116 | InitializeBlockMode:
|
|---|
| 117 | test WORD [di+DPT.wFlags], FLG_DPT_BLOCK_MODE_SUPPORTED ; Clear CF
|
|---|
| 118 | jz SHORT ReturnSuccessSinceInitializationNotNeeded
|
|---|
| 119 |
|
|---|
| 120 | mov al, [di+DPT_ATA.bMaxBlock] ; Load max block size, zero AH
|
|---|
| 121 | jmp AH24h_SetBlockSize
|
|---|
| 122 | ReturnSuccessSinceInitializationNotNeeded:
|
|---|
| 123 | ret
|
|---|
