[3] | 1 | ; File name : AH9h_HInit.asm
|
---|
| 2 | ; Project name : IDE BIOS
|
---|
| 3 | ; Created date : 9.12.2007
|
---|
[28] | 4 | ; Last update : 1.8.2010
|
---|
[3] | 5 | ; Author : Tomi Tilli
|
---|
| 6 | ; Description : Int 13h function AH=9h, Initialize Drive Parameters.
|
---|
| 7 |
|
---|
| 8 | ; Section containing code
|
---|
| 9 | SECTION .text
|
---|
| 10 |
|
---|
| 11 | ;--------------------------------------------------------------------
|
---|
| 12 | ; Int 13h function AH=9h, Initialize Drive Parameters.
|
---|
| 13 | ;
|
---|
| 14 | ; AH9h_HandlerForInitializeDriveParameters
|
---|
| 15 | ; Parameters:
|
---|
| 16 | ; AH: Bios function 9h
|
---|
| 17 | ; DL: Drive number
|
---|
| 18 | ; Parameters loaded by Int13h_Jump:
|
---|
| 19 | ; DS: RAMVARS segment
|
---|
| 20 | ; Returns:
|
---|
| 21 | ; AH: Int 13h return status
|
---|
| 22 | ; CF: 0 if succesfull, 1 if error
|
---|
| 23 | ; IF: 1
|
---|
| 24 | ; Corrupts registers:
|
---|
| 25 | ; Flags
|
---|
| 26 | ;--------------------------------------------------------------------
|
---|
| 27 | ALIGN JUMP_ALIGN
|
---|
| 28 | AH9h_HandlerForInitializeDriveParameters:
|
---|
| 29 | push dx
|
---|
| 30 | push cx
|
---|
| 31 | push bx
|
---|
| 32 | push ax
|
---|
| 33 | call AH9h_InitializeDriveForUse
|
---|
| 34 | jmp Int13h_PopXRegsAndReturn
|
---|
| 35 |
|
---|
| 36 |
|
---|
| 37 | ;--------------------------------------------------------------------
|
---|
| 38 | ; Initialized drive to be ready for use.
|
---|
| 39 | ;
|
---|
| 40 | ; AH9h_InitializeDriveForUse
|
---|
| 41 | ; Parameters:
|
---|
| 42 | ; DL: Drive number
|
---|
| 43 | ; DS: RAMVARS segment
|
---|
| 44 | ; Returns:
|
---|
| 45 | ; DS:DI: Ptr to DPT
|
---|
| 46 | ; AH: Int 13h return status
|
---|
| 47 | ; CF: 0 if succesfull, 1 if error
|
---|
| 48 | ; Corrupts registers:
|
---|
| 49 | ; AL, BX
|
---|
| 50 | ;--------------------------------------------------------------------
|
---|
| 51 | ALIGN JUMP_ALIGN
|
---|
| 52 | AH9h_InitializeDriveForUse:
|
---|
| 53 | push dx
|
---|
| 54 | push cx
|
---|
| 55 |
|
---|
| 56 | ; Try to select drive and wait until ready
|
---|
| 57 | call FindDPT_ForDriveNumber
|
---|
| 58 | or BYTE [di+DPT.bReset], MASK_RESET_ALL ; Everything uninitialized
|
---|
| 59 | call HDrvSel_SelectDriveAndDisableIRQ
|
---|
| 60 | jc SHORT .ReturnNotSuccessfull
|
---|
| 61 | and BYTE [di+DPT.bReset], ~FLG_RESET_nDRDY ; Clear since success
|
---|
| 62 |
|
---|
| 63 | ; Initialize CHS parameters if LBA is not used
|
---|
| 64 | call AH9h_InitializeDeviceParameters
|
---|
| 65 | jc SHORT .RecalibrateDrive
|
---|
| 66 | and BYTE [di+DPT.bReset], ~FLG_RESET_nINITPRMS
|
---|
| 67 |
|
---|
| 68 | ; Recalibrate drive by seeking to cylinder 0
|
---|
| 69 | ALIGN JUMP_ALIGN
|
---|
| 70 | .RecalibrateDrive:
|
---|
| 71 | call AH11h_RecalibrateDrive
|
---|
| 72 | mov dl, [di+DPT.bDrvNum] ; Restore DL
|
---|
| 73 | jc SHORT .InitializeBlockMode
|
---|
| 74 | and BYTE [di+DPT.bReset], ~FLG_RESET_nRECALIBRATE
|
---|
| 75 |
|
---|
| 76 | ; Initialize block mode transfers
|
---|
| 77 | ALIGN JUMP_ALIGN
|
---|
| 78 | .InitializeBlockMode:
|
---|
| 79 | call AH9h_InitializeBlockMode
|
---|
[28] | 80 | ;mov dl, [di+DPT.bDrvNum] ; Restore DL
|
---|
[3] | 81 | jc SHORT .ReturnNotSuccessfull
|
---|
| 82 | and BYTE [di+DPT.bReset], ~FLG_RESET_nSETBLOCK
|
---|
| 83 |
|
---|
| 84 | .ReturnNotSuccessfull:
|
---|
| 85 | pop cx
|
---|
| 86 | pop dx
|
---|
| 87 | ret
|
---|
| 88 |
|
---|
| 89 |
|
---|
| 90 | ;--------------------------------------------------------------------
|
---|
| 91 | ; Sends Initialize Device Parameters command to IDE Hard Disk.
|
---|
| 92 | ; Initialization is used to initialize logical CHS parameters. Drives
|
---|
| 93 | ; may not support all CHS values.
|
---|
| 94 | ; This command is only supported by drives that supports CHS addressing.
|
---|
| 95 | ;
|
---|
| 96 | ; AH9h_InitializeDeviceParameters
|
---|
| 97 | ; Parameters:
|
---|
| 98 | ; DS:DI: Ptr to DPT
|
---|
| 99 | ; Returns:
|
---|
| 100 | ; AH: BIOS Error code
|
---|
| 101 | ; CF: Cleared if succesfull
|
---|
| 102 | ; Set if any error
|
---|
| 103 | ; Corrupts registers:
|
---|
| 104 | ; AL, BX, CX
|
---|
| 105 | ;--------------------------------------------------------------------
|
---|
| 106 | ALIGN JUMP_ALIGN
|
---|
| 107 | AH9h_InitializeDeviceParameters:
|
---|
| 108 | ; No need to initialize CHS parameters if LBA mode enabled
|
---|
| 109 | test BYTE [di+DPT.bDrvSel], FLG_IDE_DRVHD_LBA ; Clears CF
|
---|
| 110 | jnz SHORT .Return
|
---|
| 111 |
|
---|
| 112 | push dx
|
---|
| 113 | mov bh, [di+DPT.bPHeads]
|
---|
| 114 | dec bh ; Max head number
|
---|
| 115 | mov dx, [RAMVARS.wIdeBase]
|
---|
| 116 | call HCommand_OutputTranslatedLCHSaddress
|
---|
| 117 | mov ah, HCMD_INIT_DEV
|
---|
| 118 | mov al, [di+DPT.bPSect] ; Sectors per track
|
---|
| 119 | call HCommand_OutputSectorCountAndCommand
|
---|
| 120 | call HStatus_WaitBsyDefTime ; Wait until drive ready (DRDY won't be set!)
|
---|
| 121 | pop dx
|
---|
| 122 | .Return:
|
---|
| 123 | ret
|
---|
| 124 |
|
---|
| 125 |
|
---|
| 126 | ;--------------------------------------------------------------------
|
---|
| 127 | ; Initializes block mode transfers.
|
---|
| 128 | ;
|
---|
| 129 | ; AH9h_InitializeBlockMode
|
---|
| 130 | ; Parameters:
|
---|
| 131 | ; DL: Drive number
|
---|
| 132 | ; DS:DI: Ptr to DPT
|
---|
| 133 | ; Returns:
|
---|
| 134 | ; AH: BIOS Error code
|
---|
| 135 | ; CF: Cleared if succesfull
|
---|
| 136 | ; Set if any error
|
---|
| 137 | ; Corrupts registers:
|
---|
| 138 | ; AL, BX, CX, DX
|
---|
| 139 | ;--------------------------------------------------------------------
|
---|
| 140 | ALIGN JUMP_ALIGN
|
---|
| 141 | AH9h_InitializeBlockMode:
|
---|
| 142 | mov ax, FLG_DRVPARAMS_BLOCKMODE
|
---|
| 143 | call AccessDPT_TestIdeVarsFlagsForMasterOrSlaveDrive
|
---|
| 144 | jz SHORT .Return ; Block mode disabled (CF cleared)
|
---|
| 145 | eMOVZX ax, BYTE [di+DPT.bMaxBlock] ; Load max block size, zero AH
|
---|
| 146 | test al, al ; Block mode supported? (clears CF)
|
---|
| 147 | jz SHORT .Return ; If not, return
|
---|
| 148 | jmp AH24h_SetBlockSize
|
---|
| 149 | .Return:
|
---|
| 150 | ret
|
---|