[148] | 1 | ; Project name : XTIDE Universal BIOS |
---|
[3] | 2 | ; Description : Int 13h function AH=9h, Initialize Drive Parameters. |
---|
| 3 | |
---|
| 4 | ; Section containing code |
---|
| 5 | SECTION .text |
---|
| 6 | |
---|
| 7 | ;-------------------------------------------------------------------- |
---|
| 8 | ; Int 13h function AH=9h, Initialize Drive Parameters. |
---|
| 9 | ; |
---|
| 10 | ; AH9h_HandlerForInitializeDriveParameters |
---|
| 11 | ; Parameters: |
---|
[148] | 12 | ; DL: Translated Drive number |
---|
| 13 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
[150] | 14 | ; SS:BP: Ptr to IDEPACK |
---|
| 15 | ; Returns with INTPACK: |
---|
[3] | 16 | ; AH: Int 13h return status |
---|
| 17 | ; CF: 0 if succesfull, 1 if error |
---|
| 18 | ;-------------------------------------------------------------------- |
---|
| 19 | ALIGN JUMP_ALIGN |
---|
| 20 | AH9h_HandlerForInitializeDriveParameters: |
---|
[84] | 21 | %ifndef USE_186 |
---|
[3] | 22 | call AH9h_InitializeDriveForUse |
---|
[148] | 23 | jmp Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH |
---|
[84] | 24 | %else |
---|
[148] | 25 | push Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH |
---|
[84] | 26 | ; Fall through to AH9h_InitializeDriveForUse |
---|
| 27 | %endif |
---|
[3] | 28 | |
---|
| 29 | |
---|
| 30 | ;-------------------------------------------------------------------- |
---|
| 31 | ; Initialized drive to be ready for use. |
---|
| 32 | ; |
---|
| 33 | ; AH9h_InitializeDriveForUse |
---|
| 34 | ; Parameters: |
---|
[148] | 35 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
[150] | 36 | ; SS:BP: Ptr to IDEPACK |
---|
[3] | 37 | ; Returns: |
---|
| 38 | ; AH: Int 13h return status |
---|
| 39 | ; CF: 0 if succesfull, 1 if error |
---|
| 40 | ; Corrupts registers: |
---|
[148] | 41 | ; AL, BX, DX |
---|
[3] | 42 | ;-------------------------------------------------------------------- |
---|
| 43 | ALIGN JUMP_ALIGN |
---|
| 44 | AH9h_InitializeDriveForUse: |
---|
| 45 | push cx |
---|
| 46 | |
---|
| 47 | ; Try to select drive and wait until ready |
---|
[158] | 48 | or BYTE [di+DPT.bFlagsHigh], MASKH_DPT_RESET ; Everything uninitialized |
---|
[150] | 49 | call AccessDPT_GetDriveSelectByteToAL |
---|
| 50 | mov [bp+IDEPACK.bDrvAndHead], al |
---|
| 51 | call Device_SelectDrive |
---|
[3] | 52 | jc SHORT .ReturnNotSuccessfull |
---|
[158] | 53 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nDRDY ; Clear since success |
---|
[3] | 54 | |
---|
| 55 | ; Initialize CHS parameters if LBA is not used |
---|
[150] | 56 | call InitializeDeviceParameters |
---|
[3] | 57 | jc SHORT .RecalibrateDrive |
---|
[158] | 58 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nINITPRMS |
---|
[3] | 59 | |
---|
| 60 | ; Recalibrate drive by seeking to cylinder 0 |
---|
| 61 | .RecalibrateDrive: |
---|
| 62 | call AH11h_RecalibrateDrive |
---|
| 63 | jc SHORT .InitializeBlockMode |
---|
[158] | 64 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nRECALIBRATE |
---|
[3] | 65 | |
---|
| 66 | ; Initialize block mode transfers |
---|
| 67 | .InitializeBlockMode: |
---|
[150] | 68 | call InitializeBlockMode |
---|
[3] | 69 | jc SHORT .ReturnNotSuccessfull |
---|
[158] | 70 | and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_RESET_nSETBLOCK ; Keeps CF clear |
---|
[3] | 71 | |
---|
| 72 | .ReturnNotSuccessfull: |
---|
| 73 | pop cx |
---|
| 74 | ret |
---|
| 75 | |
---|
| 76 | |
---|
| 77 | ;-------------------------------------------------------------------- |
---|
[150] | 78 | ; InitializeDeviceParameters |
---|
[3] | 79 | ; Parameters: |
---|
[150] | 80 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
| 81 | ; SS:BP: Ptr to IDEPACK |
---|
[3] | 82 | ; Returns: |
---|
| 83 | ; AH: BIOS Error code |
---|
| 84 | ; CF: Cleared if succesfull |
---|
| 85 | ; Set if any error |
---|
| 86 | ; Corrupts registers: |
---|
[150] | 87 | ; AL, BX, CX, DX |
---|
[3] | 88 | ;-------------------------------------------------------------------- |
---|
| 89 | ALIGN JUMP_ALIGN |
---|
[150] | 90 | InitializeDeviceParameters: |
---|
[3] | 91 | ; No need to initialize CHS parameters if LBA mode enabled |
---|
[158] | 92 | test BYTE [di+DPT.bFlagsLow], FLG_DRVNHEAD_LBA ; Clear CF |
---|
[150] | 93 | jnz SHORT ReturnSuccessSinceInitializationNotNeeded |
---|
[3] | 94 | |
---|
[157] | 95 | ; Initialize Logical Sectors per Track and Max Head number |
---|
[150] | 96 | mov ah, [di+DPT.bPchsHeads] |
---|
| 97 | dec ah ; Max Head number |
---|
| 98 | mov dl, [di+DPT.bPchsSectors] ; Sectors per Track |
---|
| 99 | mov al, COMMAND_INITIALIZE_DEVICE_PARAMETERS |
---|
| 100 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY) |
---|
| 101 | jmp Idepack_StoreNonExtParametersAndIssueCommandFromAL |
---|
[3] | 102 | |
---|
| 103 | |
---|
| 104 | ;-------------------------------------------------------------------- |
---|
[150] | 105 | ; InitializeBlockMode |
---|
[3] | 106 | ; Parameters: |
---|
[150] | 107 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
[3] | 108 | ; Returns: |
---|
| 109 | ; AH: BIOS Error code |
---|
| 110 | ; CF: Cleared if succesfull |
---|
| 111 | ; Set if any error |
---|
| 112 | ; Corrupts registers: |
---|
| 113 | ; AL, BX, CX, DX |
---|
| 114 | ;-------------------------------------------------------------------- |
---|
| 115 | ALIGN JUMP_ALIGN |
---|
[150] | 116 | InitializeBlockMode: |
---|
[158] | 117 | test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED ; Clear CF |
---|
[150] | 118 | jz SHORT ReturnSuccessSinceInitializationNotNeeded |
---|
| 119 | |
---|
| 120 | mov al, [di+DPT_ATA.bMaxBlock] ; Load max block size, zero AH |
---|
[3] | 121 | jmp AH24h_SetBlockSize |
---|
[150] | 122 | ReturnSuccessSinceInitializationNotNeeded: |
---|
[3] | 123 | ret |
---|