| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Int 13h function AH=25h, Get Drive Information.
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing code
|
|---|
| 5 | SECTION .text
|
|---|
| 6 |
|
|---|
| 7 | ;--------------------------------------------------------------------
|
|---|
| 8 | ; Int 13h function AH=25h, Get Drive Information.
|
|---|
| 9 | ;
|
|---|
| 10 | ; AH25h_HandlerForGetDriveInformation
|
|---|
| 11 | ; Parameters:
|
|---|
| 12 | ; AH: Bios function 25h
|
|---|
| 13 | ; DL: Drive number
|
|---|
| 14 | ; ES:BX: Ptr to buffer to receive 512-byte drive information
|
|---|
| 15 | ; Parameters loaded by Int13h_Jump:
|
|---|
| 16 | ; DS: RAMVARS segment
|
|---|
| 17 | ; Returns:
|
|---|
| 18 | ; ES:BX: Ptr to 512-byte buffer to receive drive Information
|
|---|
| 19 | ; AH: Int 13h return status
|
|---|
| 20 | ; CF: 0 if succesfull, 1 if error
|
|---|
| 21 | ; IF: 1
|
|---|
| 22 | ; Corrupts registers:
|
|---|
| 23 | ; Flags
|
|---|
| 24 | ;--------------------------------------------------------------------
|
|---|
| 25 | ALIGN JUMP_ALIGN
|
|---|
| 26 | AH25h_HandlerForGetDriveInformation:
|
|---|
| 27 | push dx
|
|---|
| 28 | push cx
|
|---|
| 29 | push bx
|
|---|
| 30 | push ax
|
|---|
| 31 | push es
|
|---|
| 32 |
|
|---|
| 33 | ; Wait until previously selected drive is ready
|
|---|
| 34 | call FindDPT_ForDriveNumber ; DS:DI now points to DPT
|
|---|
| 35 | call HDrvSel_SelectDriveAndDisableIRQ
|
|---|
| 36 | jc SHORT .Return ; Return if error
|
|---|
| 37 |
|
|---|
| 38 | ; Get drive information
|
|---|
| 39 | call HPIO_NormalizeDataPointer
|
|---|
| 40 | push bx
|
|---|
| 41 | mov dx, [RAMVARS.wIdeBase] ; Load base port address
|
|---|
| 42 | eMOVZX bx, BYTE [di+DPT.bIdeOff] ; Load offset to IDEVARS
|
|---|
| 43 | mov bl, [cs:bx+IDEVARS.bBusType]; Load bus type to BL
|
|---|
| 44 | mov bh, [di+DPT.bDrvSel] ; Load drive sel byte to BH
|
|---|
| 45 | pop di ; Pop buffer offset to DI
|
|---|
| 46 | call AH25h_GetDriveInfo ; Get drive information
|
|---|
| 47 | .Return:
|
|---|
| 48 | pop es
|
|---|
| 49 | jmp Int13h_PopXRegsAndReturn
|
|---|
| 50 |
|
|---|
| 51 |
|
|---|
| 52 | ;--------------------------------------------------------------------
|
|---|
| 53 | ; Gets drive information using Identify Device command.
|
|---|
| 54 | ;
|
|---|
| 55 | ; AH25h_GetDriveInfo
|
|---|
| 56 | ; Parameters:
|
|---|
| 57 | ; BH: Drive Select byte for Drive and Head Select Register
|
|---|
| 58 | ; BL: Bus type
|
|---|
| 59 | ; DX: IDE Controller base port address
|
|---|
| 60 | ; DS: Segment to RAMVARS
|
|---|
| 61 | ; ES:DI: Ptr to buffer to receive 512 byte drive information
|
|---|
| 62 | ; Returns:
|
|---|
| 63 | ; AH: Int 13h return status (will be stored to BDA)
|
|---|
| 64 | ; CF: 0 if succesfull, 1 if error
|
|---|
| 65 | ; Corrupts registers:
|
|---|
| 66 | ; AL, CX
|
|---|
| 67 | ;--------------------------------------------------------------------
|
|---|
| 68 | ALIGN JUMP_ALIGN
|
|---|
| 69 | AH25h_GetDriveInfo:
|
|---|
| 70 | push di
|
|---|
| 71 | push dx
|
|---|
| 72 | push bx
|
|---|
| 73 |
|
|---|
| 74 | ; Select Master or Slave drive.
|
|---|
| 75 | ; DO NOT WAIT UNTIL CURRENTLY SELECTED IS READY!
|
|---|
| 76 | ; It makes slave drive detection impossible if master is not present.
|
|---|
| 77 | mov [RAMVARS.wIdeBase], dx ; Store IDE Base port to RAMVARS
|
|---|
| 78 | add dx, BYTE REG_IDE_DRVHD ; DX to Drive and Head Sel Register
|
|---|
| 79 | mov al, bh ; Drive Select byte to AL
|
|---|
| 80 | out dx, al ; Select Master or Slave drive
|
|---|
| 81 | sub dx, BYTE REG_IDE_DRVHD ; Back to IDE Base port
|
|---|
| 82 | call AH25h_GetDriveDetectionTimeoutValue
|
|---|
| 83 | call HStatus_WaitRdy ; Wait until ready to accept commands
|
|---|
| 84 | jc SHORT .Return ; Return if error
|
|---|
| 85 |
|
|---|
| 86 | ; Output command
|
|---|
| 87 | mov al, HCMD_ID_DEV ; Load Identify Device command to AL
|
|---|
| 88 | out dx, al ; Output command
|
|---|
| 89 | call HStatus_WaitDrqDefTime ; Wait until ready to transfer (no IRQ!)
|
|---|
| 90 | jc SHORT .Return ; Return if error
|
|---|
| 91 |
|
|---|
| 92 | ; Transfer data
|
|---|
| 93 | sub dx, BYTE REGR_IDE_ST ; DX to IDE Data Reg
|
|---|
| 94 | xor bh, bh ; BX now contains bus type
|
|---|
| 95 | mov cx, 256 ; Transfer 256 words (single sector)
|
|---|
| 96 | cld ; INSW to increment DI
|
|---|
| 97 | call [cs:bx+g_rgfnPioRead] ; Read ID sector
|
|---|
| 98 | call HStatus_WaitRdyDefTime ; Wait until drive ready
|
|---|
| 99 |
|
|---|
| 100 | ; Return
|
|---|
| 101 | .Return:
|
|---|
| 102 | pop bx
|
|---|
| 103 | pop dx
|
|---|
| 104 | pop di
|
|---|
| 105 | ret
|
|---|
| 106 |
|
|---|
| 107 |
|
|---|
| 108 | ;--------------------------------------------------------------------
|
|---|
| 109 | ; Returns timeout value for drive detection.
|
|---|
| 110 | ; Long timeout is required for detecing first drive to make sure it is
|
|---|
| 111 | ; ready after power-on (ATA specification says up to 31 seconds).
|
|---|
| 112 | ; Short timeout is used for additional drives to prevent long boot time
|
|---|
| 113 | ; when drive has failed or it is not present.
|
|---|
| 114 | ;
|
|---|
| 115 | ; AH25h_GetDriveDetectionTimeoutValue
|
|---|
| 116 | ; Parameters:
|
|---|
| 117 | ; DS: Segment to RAMVARS
|
|---|
| 118 | ; Returns:
|
|---|
| 119 | ; CL: Timeout value
|
|---|
| 120 | ; Corrupts registers:
|
|---|
| 121 | ; Nothing
|
|---|
| 122 | ;--------------------------------------------------------------------
|
|---|
| 123 | ALIGN JUMP_ALIGN
|
|---|
| 124 | AH25h_GetDriveDetectionTimeoutValue:
|
|---|
| 125 | cmp BYTE [RAMVARS.bDrvCnt], 0 ; Detecting first drive?
|
|---|
| 126 | je SHORT .GetLongDelayForInitialDetection
|
|---|
| 127 | mov cl, B_TIMEOUT_DRVINFO ; Load short timeout
|
|---|
| 128 | ret
|
|---|
| 129 | ALIGN JUMP_ALIGN
|
|---|
| 130 | .GetLongDelayForInitialDetection:
|
|---|
| 131 | mov cl, B_TIMEOUT_RESET ; Load long timeout
|
|---|
| 132 | ret
|
|---|
