source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH24h_HSetBlocks.asm@ 549

; Project name  :   XTIDE Universal BIOS
; Description   :   Int 13h function AH=24h, Set Multiple Blocks.

;
; XTIDE Universal BIOS and Associated Tools
; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 2 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
; GNU General Public License for more details.
; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
;

; Section containing code
SECTION .text

;--------------------------------------------------------------------
; Int 13h function AH=24h, Set Multiple Blocks.
;
; AH24h_HandlerForSetMultipleBlocks
;   Parameters:
;       AL:     Same as in INTPACK
;       DL:     Translated Drive number
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;       SS:BP:  Ptr to IDEPACK
;   Parameters on INTPACK:
;       AL:     Number of Sectors per Block (1, 2, 4, 8, 16, 32, 64 or 128)
;   Returns with INTPACK:
;       AH:     Int 13h return status
;       CF:     0 if successful, 1 if error
;--------------------------------------------------------------------
AH24h_HandlerForSetMultipleBlocks:
%ifndef USE_186
    call    AH24h_SetBlockSize
    jmp     Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
%else
    push    Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
    ; Fall to AH24h_SetBlockSize
%endif


;--------------------------------------------------------------------
; AH24h_SetBlockSize
;   Parameters:
;       AL:     Number of Sectors per Block (1, 2, 4, 8, 16, 32, 64 or 128)
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;       SS:BP:  Ptr to IDEPACK
;   Returns:
;       AH:     Int 13h return status
;       CF:     0 if successful, 1 if error
;   Corrupts registers:
;       AL, CX, DX
;--------------------------------------------------------------------
AH24h_SetBlockSize:
%ifdef MODULE_8BIT_IDE_ADVANCED
    ; XT-CF does not support largest block size in DMA mode.
    cmp     al, XTCF_DMA_MODE_MAX_BLOCK_SIZE
    jbe     SHORT .NoNeedToLimitBlockSize

    ; Return error if we tried too large block for XT-CF.
    ; Do not limit it to maximum supported since software calling AH=24h
    ; must know what the actual block size is.
    cmp     BYTE [di+DPT_ATA.bDevice], DEVICE_8BIT_XTCF_DMA
    je      SHORT ProcessXTCFsubcommandFromAL.AH1Eh_LoadInvalidCommandToAHandSetCF
.NoNeedToLimitBlockSize:
%endif ; MODULE_8BIT_IDE_ADVANCED

    push    bx

    push    ax
    xchg    dx, ax      ; DL = Block size (Sector Count Register)
    mov     al, COMMAND_SET_MULTIPLE_MODE
    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRDY, FLG_STATUS_DRDY)
    call    Idepack_StoreNonExtParametersAndIssueCommandFromAL
    pop     bx
    jnc     SHORT .StoreBlockSize

    ; Drive disabled block mode since we tried unsupported block size.
    ; We must adjust DPT accordingly.
    mov     bl, 1       ; Block size 1 will always work (=Block mode disabled)
.StoreBlockSize:        ; Store new block size to DPT and return
    mov     [di+DPT_ATA.bBlockSize], bl

    pop     bx
    ret