[3] | 1 | ; File name : AH24h_HSetBlocks.asm |
---|
| 2 | ; Project name : IDE BIOS |
---|
| 3 | ; Created date : 28.12.2009 |
---|
[84] | 4 | ; Last update : 14.1.2011 |
---|
| 5 | ; Author : Tomi Tilli, |
---|
| 6 | ; : Krister Nordvall (optimizations) |
---|
[3] | 7 | ; Description : Int 13h function AH=24h, Set Multiple Blocks. |
---|
| 8 | |
---|
| 9 | ; Section containing code |
---|
| 10 | SECTION .text |
---|
| 11 | |
---|
| 12 | ;-------------------------------------------------------------------- |
---|
| 13 | ; Int 13h function AH=24h, Set Multiple Blocks. |
---|
| 14 | ; |
---|
| 15 | ; AH24h_HandlerForSetMultipleBlocks |
---|
| 16 | ; Parameters: |
---|
| 17 | ; AH: Bios function 24h |
---|
| 18 | ; AL: Number of Sectors per Block (1, 2, 4, 8, 16, 32, 64 or 128) |
---|
| 19 | ; DL: Drive number |
---|
| 20 | ; Parameters loaded by Int13h_Jump: |
---|
| 21 | ; DS: RAMVARS segment |
---|
| 22 | ; Returns: |
---|
| 23 | ; AH: Int 13h return status |
---|
| 24 | ; CF: 0 if succesfull, 1 if error |
---|
| 25 | ; IF: 1 |
---|
| 26 | ; Corrupts registers: |
---|
| 27 | ; Flags |
---|
| 28 | ;-------------------------------------------------------------------- |
---|
| 29 | ALIGN JUMP_ALIGN |
---|
| 30 | AH24h_HandlerForSetMultipleBlocks: |
---|
| 31 | push dx |
---|
| 32 | push cx |
---|
| 33 | push bx |
---|
| 34 | push ax |
---|
[84] | 35 | %ifndef USE_186 |
---|
[3] | 36 | call AH24h_SetBlockSize |
---|
| 37 | jmp Int13h_PopXRegsAndReturn |
---|
[84] | 38 | %else |
---|
| 39 | push Int13h_PopXRegsAndReturn |
---|
| 40 | ; Fall through to AH24h_SetBlockSize |
---|
| 41 | %endif |
---|
[3] | 42 | |
---|
| 43 | |
---|
| 44 | ;-------------------------------------------------------------------- |
---|
| 45 | ; Sets block size for block mode transfers. |
---|
| 46 | ; |
---|
| 47 | ; AH24h_SetBlockSize |
---|
| 48 | ; Parameters: |
---|
| 49 | ; AL: Number of Sectors per Block (1, 2, 4, 8, 16, 32, 64 or 128) |
---|
| 50 | ; DL: Drive number |
---|
| 51 | ; DS: RAMVARS segment |
---|
| 52 | ; Returns: |
---|
| 53 | ; DS:DI: Ptr to DPT |
---|
| 54 | ; AH: Int 13h return status |
---|
| 55 | ; CF: 0 if succesfull, 1 if error |
---|
| 56 | ; Corrupts registers: |
---|
| 57 | ; AL, BX, CX, DX, DI |
---|
| 58 | ;-------------------------------------------------------------------- |
---|
| 59 | ALIGN JUMP_ALIGN |
---|
| 60 | AH24h_SetBlockSize: |
---|
| 61 | ; Select Master or Slave and wait until ready |
---|
| 62 | mov bl, al ; Backup block size |
---|
| 63 | call FindDPT_ForDriveNumber ; DS:DI now points to DPT |
---|
| 64 | call HDrvSel_SelectDriveAndDisableIRQ ; Select drive and wait until ready |
---|
| 65 | jc SHORT .Return ; Return if error |
---|
| 66 | |
---|
| 67 | ; Output block size and command |
---|
| 68 | mov al, bl ; Restore block size to AL |
---|
| 69 | mov ah, HCMD_SET_MUL ; Load command to AH |
---|
| 70 | mov dx, [RAMVARS.wIdeBase] ; Load base port address |
---|
| 71 | add dx, BYTE REG_IDE_CNT |
---|
| 72 | call HCommand_OutputSectorCountAndCommand |
---|
| 73 | call HStatus_WaitBsyDefTime ; Wait until drive not busy |
---|
| 74 | jc SHORT .DisableBlockMode |
---|
| 75 | |
---|
| 76 | ; Store new block size to DPT and return |
---|
| 77 | mov [di+DPT.bSetBlock], bl ; Store new block size |
---|
| 78 | xor ah, ah ; Zero AH and CF since success |
---|
| 79 | ret |
---|
| 80 | .DisableBlockMode: |
---|
| 81 | mov BYTE [di+DPT.bSetBlock], 1 ; Disable block mode |
---|
| 82 | .Return: |
---|
| 83 | ret |
---|