[3] | 1 | ; File name : AH24h_HSetBlocks.asm
|
---|
| 2 | ; Project name : IDE BIOS
|
---|
| 3 | ; Created date : 28.12.2009
|
---|
[84] | 4 | ; Last update : 14.1.2011
|
---|
| 5 | ; Author : Tomi Tilli,
|
---|
| 6 | ; : Krister Nordvall (optimizations)
|
---|
[3] | 7 | ; Description : Int 13h function AH=24h, Set Multiple Blocks.
|
---|
| 8 |
|
---|
| 9 | ; Section containing code
|
---|
| 10 | SECTION .text
|
---|
| 11 |
|
---|
| 12 | ;--------------------------------------------------------------------
|
---|
| 13 | ; Int 13h function AH=24h, Set Multiple Blocks.
|
---|
| 14 | ;
|
---|
| 15 | ; AH24h_HandlerForSetMultipleBlocks
|
---|
| 16 | ; Parameters:
|
---|
| 17 | ; AH: Bios function 24h
|
---|
| 18 | ; AL: Number of Sectors per Block (1, 2, 4, 8, 16, 32, 64 or 128)
|
---|
| 19 | ; DL: Drive number
|
---|
| 20 | ; Parameters loaded by Int13h_Jump:
|
---|
| 21 | ; DS: RAMVARS segment
|
---|
| 22 | ; Returns:
|
---|
| 23 | ; AH: Int 13h return status
|
---|
| 24 | ; CF: 0 if succesfull, 1 if error
|
---|
| 25 | ; IF: 1
|
---|
| 26 | ; Corrupts registers:
|
---|
| 27 | ; Flags
|
---|
| 28 | ;--------------------------------------------------------------------
|
---|
| 29 | ALIGN JUMP_ALIGN
|
---|
| 30 | AH24h_HandlerForSetMultipleBlocks:
|
---|
| 31 | push dx
|
---|
| 32 | push cx
|
---|
| 33 | push bx
|
---|
| 34 | push ax
|
---|
[84] | 35 | %ifndef USE_186
|
---|
[3] | 36 | call AH24h_SetBlockSize
|
---|
| 37 | jmp Int13h_PopXRegsAndReturn
|
---|
[84] | 38 | %else
|
---|
| 39 | push Int13h_PopXRegsAndReturn
|
---|
| 40 | ; Fall through to AH24h_SetBlockSize
|
---|
| 41 | %endif
|
---|
[3] | 42 |
|
---|
| 43 |
|
---|
| 44 | ;--------------------------------------------------------------------
|
---|
| 45 | ; Sets block size for block mode transfers.
|
---|
| 46 | ;
|
---|
| 47 | ; AH24h_SetBlockSize
|
---|
| 48 | ; Parameters:
|
---|
| 49 | ; AL: Number of Sectors per Block (1, 2, 4, 8, 16, 32, 64 or 128)
|
---|
| 50 | ; DL: Drive number
|
---|
| 51 | ; DS: RAMVARS segment
|
---|
| 52 | ; Returns:
|
---|
| 53 | ; DS:DI: Ptr to DPT
|
---|
| 54 | ; AH: Int 13h return status
|
---|
| 55 | ; CF: 0 if succesfull, 1 if error
|
---|
| 56 | ; Corrupts registers:
|
---|
| 57 | ; AL, BX, CX, DX, DI
|
---|
| 58 | ;--------------------------------------------------------------------
|
---|
| 59 | ALIGN JUMP_ALIGN
|
---|
| 60 | AH24h_SetBlockSize:
|
---|
| 61 | ; Select Master or Slave and wait until ready
|
---|
| 62 | mov bl, al ; Backup block size
|
---|
| 63 | call FindDPT_ForDriveNumber ; DS:DI now points to DPT
|
---|
| 64 | call HDrvSel_SelectDriveAndDisableIRQ ; Select drive and wait until ready
|
---|
| 65 | jc SHORT .Return ; Return if error
|
---|
| 66 |
|
---|
| 67 | ; Output block size and command
|
---|
| 68 | mov al, bl ; Restore block size to AL
|
---|
| 69 | mov ah, HCMD_SET_MUL ; Load command to AH
|
---|
| 70 | mov dx, [RAMVARS.wIdeBase] ; Load base port address
|
---|
| 71 | add dx, BYTE REG_IDE_CNT
|
---|
| 72 | call HCommand_OutputSectorCountAndCommand
|
---|
| 73 | call HStatus_WaitBsyDefTime ; Wait until drive not busy
|
---|
| 74 | jc SHORT .DisableBlockMode
|
---|
| 75 |
|
---|
| 76 | ; Store new block size to DPT and return
|
---|
| 77 | mov [di+DPT.bSetBlock], bl ; Store new block size
|
---|
| 78 | xor ah, ah ; Zero AH and CF since success
|
---|
| 79 | ret
|
---|
| 80 | .DisableBlockMode:
|
---|
| 81 | mov BYTE [di+DPT.bSetBlock], 1 ; Disable block mode
|
---|
| 82 | .Return:
|
---|
| 83 | ret
|
---|