source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AH23h_HFeatures.asm@ 590

Last change on this file since 590 was 589, checked in by Krister Nordvall, 9 years ago

Changes:

  • BIOS: Fixed a purely cosmetic bug from r542 where, in builds containing MODULE_EBIOS, the boot menu would display an incorrect drive size (0.4 kB with MODULE_STRINGS_COMPRESSED or 0.5 kB without) for old drives with no support for LBA.
  • Fixed a bug from r392 where Vision_DetectAndReturnIDinAXandPortInDXifControllerPresent would return the ID in AL instead of AH (if DANGEROUS_DETECTION had been defined).
  • Fixed a bug from r587 in AdvAtaInit.asm that would prevent detection of QDI Vision controllers.
  • Also changed how the QDI Vision IDs are defined (removed the need for shifting) to avoid confusion. This fixed a potential bug from r587 in AdvAtaInit.asm where some IDs were not being shifted.
  • Fixed a bug in PDC20x30.asm from r587 where GetPdcIDtoAX would not return with the IDE base port in DX so DisablePdcProgrammingMode would fail.
  • Made some changes to ModuleDependency.inc and other files so that MODULE_ADVANCED_ATA now requires USE_386. Consequently it is no longer included in the regular AT-builds, only in the 386_8k-build.
  • Moved the UNROLL_SECTORS_IN_CX_TO_xWORDS macros from IDE_8bit.inc to IdeIO.inc which means it's now possible to build a BIOS without MODULE_8BIT_IDE.
  • XTIDECFG: Added a minimum DOS version check (since it needs DOS version 2+) to allow the program to quit gracefully in the unlikely scenario where someone tries to run it under DOS version 1.
  • Made some changes to Drive.asm to improve drive enumeration. The old method using GET_DOS_DRIVE_PARAMETER_BLOCK_FOR_SPECIFIC_DRIVE worked well in Windows XP but not in Windows 98 SE (in Windows or in DOS mode). The two problems were; 1) The function call would access the drives which on single floppy drive systems would cause Windows to swap between A: and B: (throwing a blue screen asking the user to insert a disk etc). 2) Only floppy drives and FAT16 drives would be available in the list of drives, no FAT32/optical/network drives.
  • Improved code in IdeControllerMenu.asm so that the default port addresses for all IDE interfaces are now restored when (re-)selecting the (same) type of IDE device.
  • Also made it impossible to select a device type unless the required module is included in the loaded BIOS.
  • The version check done when loading a BIOS now uses the FLASH_SIGNATURE definition from Version.inc. Any changes affecting RomVars now only requires updating that definition. This means that changes to RomVars must be implemented in both the BIOS and XTIDECFG before being committed to the repository.
  • Added a compatibility fix for 3Com 3C503 cards to the ROM checksumming code in Buffers.asm (Buffers_GenerateChecksum).
  • SerDrive: Made some minor changes to file names and paths to improve compatibility with case sensitive environments.
  • BIOSDRVS: Made a minor size optimization which as a side effect also makes it compatible with all DOS versions including DOS version 1.
  • Library: Renamed the WAIT_RETRACE_IF_NECESSARY_THEN macro to CALL_WAIT_FOR_RETRACE_IF_NECESSARY_THEN and made a tail-call-optimized version of it (JMP_WAIT_FOR_RETRACE_IF_NECESSARY_THEN).
  • A speed optimization to the eRCL_IM macro for 386 and higher. This change breaks emulation in the sense that the macro will fail when given a memory operand as the first parameter.
  • Other minor optimizations and fixes.
File size: 3.9 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Int 13h function AH=23h,
3; Set Controller Features Register.
4
5;
6; XTIDE Universal BIOS and Associated Tools
7; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
8;
9; This program is free software; you can redistribute it and/or modify
10; it under the terms of the GNU General Public License as published by
11; the Free Software Foundation; either version 2 of the License, or
12; (at your option) any later version.
13;
14; This program is distributed in the hope that it will be useful,
15; but WITHOUT ANY WARRANTY; without even the implied warranty of
16; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17; GNU General Public License for more details.
18; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
19;
20
21; Section containing code
22SECTION .text
23
24;--------------------------------------------------------------------
25; Int 13h function AH=23h, Set Controller Features Register.
26;
27; AH23h_HandlerForSetControllerFeatures
28; Parameters:
29; AL, CX: Same as in INTPACK
30; DL: Translated Drive number
31; DS:DI: Ptr to DPT (in RAMVARS segment)
32; SS:BP: Ptr to IDEPACK
33; Parameters on INTPACK:
34; AL: Feature Number (parameter to Features Register = subcommand)
35; (Parameter registers are undocumented, these are specific for this BIOS):
36; BL: Parameter to Sector Count Register (subcommand specific)
37; BH: Parameter to LBA Low / Sector Number Register (subcommand specific)
38; CL: Parameter to LBA Middle / Cylinder Low Register (subcommand specific)
39; CH: Parameter to LBA High / Cylinder High Register (subcommand specific)
40; Returns with INTPACK:
41; AH: Int 13h return status
42; CF: 0 if successful, 1 if error
43;--------------------------------------------------------------------
44AH23h_HandlerForSetControllerFeatures:
45 xchg si, ax ; SI = Feature Number
46 mov dx, [bp+IDEPACK.intpack+INTPACK.bx]
47%ifndef USE_186
48 call AH23h_SetControllerFeatures
49 jmp Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
50%else
51 push Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
52 ; Fall to AH23h_SetControllerFeatures
53%endif
54
55
56;--------------------------------------------------------------------
57; AH23h_SetControllerFeatures
58; Parameters:
59; DL: Parameter to Sector Count Register (subcommand specific)
60; DH: Parameter to LBA Low / Sector Number Register (subcommand specific)
61; CL: Parameter to LBA Middle / Cylinder Low Register (subcommand specific)
62; CH: Parameter to LBA High / Cylinder High Register (subcommand specific)
63; SI: Feature Number (parameter to Features Register = subcommand)
64; DS:DI: Ptr to DPT (in RAMVARS segment)
65; SS:BP: Ptr to IDEPACK
66; Returns:
67; AH: Int 13h return status
68; CF: 0 if successful, 1 if error
69; Corrupts registers:
70; AL, BX, CX, DX
71;--------------------------------------------------------------------
72AH23h_SetControllerFeatures:
73 mov al, COMMAND_SET_FEATURES
74 mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
75 jmp Idepack_StoreNonExtParametersAndIssueCommandFromAL
76
77
78;--------------------------------------------------------------------
79; AH23h_Enable8bitPioMode
80; AH23h_Disable8bitPioMode
81; Parameters:
82; DS:DI: Ptr to DPT (in RAMVARS segment)
83; SS:BP: Ptr to IDEPACK
84; Returns:
85; AH: Int 13h return status
86; CF: 0 if successful, 1 if error
87; Corrupts registers:
88; AL, BX, CX, DX, SI
89;--------------------------------------------------------------------
90%ifdef MODULE_8BIT_IDE
91AH23h_Enable8bitPioMode:
92 mov si, FEATURE_ENABLE_8BIT_PIO_TRANSFER_MODE
93 jmp SHORT AH23h_SetControllerFeatures
94
95%ifdef MODULE_8BIT_IDE_ADVANCED
96AH23h_Disable8bitPioMode:
97 mov si, FEATURE_DISABLE_8BIT_PIO_TRANSFER_MODE
98 call AH23h_SetControllerFeatures
99 xor ah, ah ; Clear error since modern drives might not understand the command and are
100 ret ; always in 16-bit mode anyway
101%endif ; MODULE_8BIT_IDE_ADVANCED
102%endif ; MODULE_8BIT_IDE
Note: See TracBrowser for help on using the repository browser.