source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/Serial/SerialDPT.asm@ 269

Last change on this file since 269 was 258, checked in by gregli@…, 13 years ago

Added floppy drive emulation over the serial connection (MODULE_SERIAL_FLOPPY). Along the way, various optimizations were made to stay within the 8K ROM size target. Also, serial code now returns the number of sectors transferred.

File size: 1.1 KB
RevLine 
[150]1; Project name : XTIDE Universal BIOS
2; Description : Sets Serial Device specific parameters to DPT.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; SerialDPT_Finalize
9; Parameters:
10; DS:DI: Ptr to Disk Parameter Table
11; ES:SI: Ptr to 512-byte ATA information read from the drive
12; Returns:
[258]13; CF: Set, indicates that this is a floppy disk
14; Clear, indicates that this is a hard disk
[150]15; Corrupts registers:
[242]16; AX
[150]17;--------------------------------------------------------------------
[179]18SerialDPT_Finalize:
[258]19 mov ax, [es:si+ATA6.wSerialPortAndBaud]
[242]20 mov [di+DPT_SERIAL.wSerialPortAndBaud], ax
[258]21
22;
23; Note that this section is not under %ifdef MODULE_SERIAL_FLOPPY. It is important to
24; detect floppy disks presented by the server and not treat them like hard disks, even
25; if the floppy support is disabled.
26;
27 mov al, [es:si+ATA6.wSerialFloppyFlagAndType]
28 or al, FLGH_DPT_SERIAL_DEVICE
29 or byte [di+DPT.bFlagsHigh], al
30
31 test al, FLGH_DPT_SERIAL_FLOPPY ; clears CF
32 jz .notfloppy
33 stc
34.notfloppy:
35
[179]36 ret
37
Note: See TracBrowser for help on using the repository browser.