source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeTransfer.asm@ 607

Last change on this file since 607 was 602, checked in by Krister Nordvall, 5 years ago

Changes:

  • SerDrive: Fixed a bug that prevented use of 3.5" 720 KB floppy disk images.
  • Also added support for Microsoft DMF (Distribution Media Format) floppy disk images.
  • XTIDECFG / Library: Minor size optimizations. Added a new macro (SKIP1B) as part of that.
  • BIOS: A small size optimization (2 bytes) to MODULE_8BIT_IDE_ADVANCED that is enabled only when USE_NEC_V is defined.
File size: 11.9 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : IDE Device transfer functions.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Structure containing variables for PIO transfer functions.
21; This struct must not be larger than IDEPACK without INTPACK.
22struc PIOVARS ; Must not be larger than 9 bytes! See IDEPACK in RamVars.inc.
23 .wDataPort resb 2 ; 0-1, IDE Data Port
24 .fnXfer resb 2 ; 2-3, Offset to transfer function
25 .wSectorsInBlock resb 2 ; 4-5, Block size in sectors
26 .bSectorsLeft resb 1 ; 6, Sectors left to transfer
27 resb 1 ; 7, IDEPACK.bDeviceControl
28 .bSectorsDone resb 1 ; 8, Number of sectors xferred
29endstruc
30
31
32; Section containing code
33SECTION .text
34
35;--------------------------------------------------------------------
36; IdeTransfer_StartWithCommandInAL
37; Parameters:
38; AL: IDE command that was used to start the transfer
39; (all PIO read and write commands including Identify Device)
40; ES:SI: Ptr to data buffer
41; DS:DI: Ptr to DPT (in RAMVARS segment)
42; SS:BP: Ptr to IDEPACK
43; Returns:
44; AH: INT 13h Error Code
45; CX: Number of successfully transferred sectors
46; CF: Cleared if success, Set if error
47; Corrupts registers:
48; AL, BX, DX, SI, ES
49;--------------------------------------------------------------------
50ALIGN JUMP_ALIGN
51IdeTransfer_StartWithCommandInAL:
52 ; Are we reading or writing?
53 test al, 16 ; Bit 4 is cleared on all the read commands but set on 3 of the 4 write commands
54 mov ah, [bp+IDEPACK.bSectorCount]
55 jnz SHORT WriteToDrive
56 cmp al, COMMAND_WRITE_MULTIPLE
57 je SHORT WriteToDrive
58 ; Fall to ReadFromDrive
59
60;--------------------------------------------------------------------
61; ReadFromDrive
62; Parameters:
63; AH: Number of sectors to transfer (1...128)
64; ES:SI: Ptr to buffer to receive data
65; DS:DI: Ptr to DPT (in RAMVARS segment)
66; SS:BP: Ptr to PIOVARS
67; Returns:
68; DS:DI: Ptr to DPT (in RAMVARS segment)
69; AH: BIOS Error code
70; CX: Number of successfully transferred sectors
71; CF: 0 if transfer successful
72; 1 if any error
73; Corrupts registers:
74; AL, BX, DX, SI, ES
75;--------------------------------------------------------------------
76ReadFromDrive:
77 ; Prepare to read data to ESSI
78 mov bx, g_rgfnPioRead
79 call InitializePiovarsInSSBPwithSectorCountInAH
80%ifdef USE_AT
81 jc SHORT ReturnWithTransferErrorInAH
82%endif
83
84 ; Wait until drive is ready to transfer
85 call IdeWait_IRQorDRQ ; Wait until ready to transfer
86 jc SHORT ReturnWithTransferErrorInAH
87 xchg si, di ; ES:DI now points buffer
88
89 mov cx, [bp+PIOVARS.wSectorsInBlock] ; Max 128
90
91ALIGN JUMP_ALIGN
92.ReadNextBlockFromDrive:
93 mov dx, [bp+PIOVARS.wDataPort]
94 cmp [bp+PIOVARS.bSectorsLeft], cl
95 jbe SHORT .ReadLastBlockFromDrive
96 call [bp+PIOVARS.fnXfer]
97
98 ; Wait until ready for next block and check for errors
99 xchg di, si ; DS:DI now points DPT
100 call IdeWait_IRQorDRQ ; Wait until ready to transfer
101 jc SHORT ReturnWithTransferErrorInAH
102 xchg si, di ; ES:DI now points buffer
103
104 ; Increment number of successfully read sectors
105 mov cx, [bp+PIOVARS.wSectorsInBlock]
106 sub [bp+PIOVARS.bSectorsLeft], cl
107 add [bp+PIOVARS.bSectorsDone], cl
108 jmp SHORT .ReadNextBlockFromDrive
109
110ALIGN JUMP_ALIGN
111.ReadLastBlockFromDrive:
112 mov cl, [bp+PIOVARS.bSectorsLeft] ; CH is already zero
113 push cx
114 call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block
115
116 ; Check for errors in last block
117 mov di, si ; DS:DI now points DPT
118CheckErrorsAfterTransferringLastBlock:
119 mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_BSY)
120 call IdeWait_PollStatusFlagInBLwithTimeoutInBH
121 pop cx ; [bp+PIOVARS.bSectorsLeft]
122 jc SHORT ReturnWithTransferErrorInAH
123
124 ; All sectors successfully transferred
125 add cx, [bp+PIOVARS.bSectorsDone] ; Never sets CF
126 ret
127
128 ; Return number of successfully read sectors
129ReturnWithTransferErrorInAH:
130%ifdef USE_386
131 movzx cx, [bp+PIOVARS.bSectorsDone]
132%else
133 mov cl, [bp+PIOVARS.bSectorsDone]
134 mov ch, 0 ; Preserve CF
135%endif
136 ret
137
138
139;--------------------------------------------------------------------
140; WriteToDrive
141; Parameters:
142; AH: Number of sectors to transfer (1...128)
143; DS:DI: Ptr to DPT (in RAMVARS segment)
144; ES:SI: Ptr to buffer containing data
145; SS:BP: Ptr to PIOVARS
146; Returns:
147; AH: BIOS Error code
148; CX: Number of successfully transferred sectors
149; CF: 0 if transfer successful
150; 1 if any error
151; Corrupts registers:
152; AL, BX, DX, SI, ES
153;--------------------------------------------------------------------
154ALIGN JUMP_ALIGN
155WriteToDrive:
156 ; Prepare to write data from ESSI
157 mov bx, g_rgfnPioWrite
158 call InitializePiovarsInSSBPwithSectorCountInAH
159%ifdef USE_AT
160 jc SHORT ReturnWithTransferErrorInAH
161%endif
162
163 ; Always poll when writing first block (IRQs are generated for following blocks)
164 mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRQ)
165 call IdeWait_PollStatusFlagInBLwithTimeoutInBH
166 jc SHORT ReturnWithTransferErrorInAH
167
168 mov cx, [bp+PIOVARS.wSectorsInBlock] ; Max 128
169
170ALIGN JUMP_ALIGN
171.WriteNextBlockToDrive:
172 mov dx, [bp+PIOVARS.wDataPort]
173 cmp [bp+PIOVARS.bSectorsLeft], cl
174 jbe SHORT .WriteLastBlockToDrive
175 push ds
176 push es
177 pop ds
178 call [bp+PIOVARS.fnXfer]
179 pop ds
180 ; Wait until ready for next block and check for errors
181 call IdeWait_IRQorDRQ ; Wait until ready to transfer
182 jc SHORT ReturnWithTransferErrorInAH
183
184 ; Increment number of successfully written sectors
185 mov cx, [bp+PIOVARS.wSectorsInBlock]
186 sub [bp+PIOVARS.bSectorsLeft], cl
187 add [bp+PIOVARS.bSectorsDone], cl
188 jmp SHORT .WriteNextBlockToDrive
189
190ALIGN JUMP_ALIGN
191.WriteLastBlockToDrive:
192 mov cl, [bp+PIOVARS.bSectorsLeft] ; CH is already zero
193 push cx
194 push ds
195 push es
196 pop ds
197 call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block
198 pop ds
199 jmp SHORT CheckErrorsAfterTransferringLastBlock
200
201
202;--------------------------------------------------------------------
203; InitializePiovarsInSSBPwithSectorCountInAH
204; Parameters:
205; AH: Number of sectors to transfer (1...128)
206; BX: Offset to transfer function lookup table
207; DS:DI: Ptr to DPT (in RAMVARS segment)
208; ES:SI: Ptr to data buffer
209; SS:BP: Ptr to PIOVARS
210; Returns:
211; ES:SI: Normalized pointer
212; AH: INT 13h Error Code (only when CF set)
213; CF: Set if failed to normalize pointer (segment overflow)
214; Cleared if success
215; Corrupts registers:
216; AL, BX, DX
217;--------------------------------------------------------------------
218ALIGN JUMP_ALIGN
219InitializePiovarsInSSBPwithSectorCountInAH:
220 ; Store sizes and Data Port
221 mov [bp+PIOVARS.bSectorsLeft], ah
222%ifdef USE_AT
223 xchg dx, ax
224%endif
225 mov ax, [di+DPT.wBasePort]
226 mov [bp+PIOVARS.wDataPort], ax
227 eMOVZX ax, [di+DPT_ATA.bBlockSize]
228 mov [bp+PIOVARS.wSectorsInBlock], ax
229 mov [bp+PIOVARS.bSectorsDone], ah ; Zero
230
231 ; Get transfer function based on bus type
232 mov al, [di+DPT_ATA.bDevice]
233 add bx, ax
234%ifdef MODULE_8BIT_IDE_ADVANCED
235 cmp al, DEVICE_8BIT_XTCF_DMA
236%endif
237 mov ax, [cs:bx] ; Load offset to transfer function
238 mov [bp+PIOVARS.fnXfer], ax
239
240 ; Normalize pointer for PIO-transfers and convert to physical address for DMA transfers
241%ifdef MODULE_8BIT_IDE_ADVANCED
242 jb SHORT IdeTransfer_NormalizePointerInESSI
243
244 ; Convert ES:SI to physical address
245%ifdef USE_386
246 mov dx, es
247 xor ax, ax
248 shld ax, dx, 4
249 shl dx, 4
250 add si, dx
251 adc al, ah
252 mov es, ax
253
254%elifdef USE_186
255%ifdef USE_NEC_V
256 mov dx, es
257 xor ax, ax
258 eROL4 dl
259 eROL4 dh
260 add si, dx
261 adc al, ah
262 mov es, ax
263
264%else
265 mov ax, es
266 rol ax, 4
267 mov dx, ax
268 and ax, 0Fh
269 xor dx, ax
270 add si, dx
271 adc al, ah
272 mov es, ax
273
274%endif
275%else ; 808x
276 mov al, 4
277 mov dx, es
278 xchg cx, ax
279 rol dx, cl
280 mov cx, dx
281 xchg cx, ax
282 and ax, 0Fh
283 xor dx, ax
284 add si, dx
285 adc al, ah
286 mov es, ax
287
288%endif
289
290 ret ; With CF cleared (taken care of by the physical address conversion)
291%endif ; MODULE_8BIT_IDE_ADVANCED
292 ; Fall to IdeTransfer_NormalizePointerInESSI if no MODULE_8BIT_IDE_ADVANCED
293
294
295;--------------------------------------------------------------------
296; IdeTransfer_NormalizePointerInESSI
297; Parameters:
298; DH: Number of sectors to transfer (when USE_AT defined)
299; ES:SI: Ptr to be normalized
300; Returns:
301; ES:SI: Normalized pointer (SI = 0...15)
302; AH: INT 13h Error Code (when USE_AT defined and normalization was attempted)
303; CF: Set if failed to normalize pointer (segment overflow)
304; Cleared if success
305; Corrupts registers:
306; AX, DX
307;--------------------------------------------------------------------
308IdeTransfer_NormalizePointerInESSI:
309; Normalization can cause segment overflow if it is done when not needed
310; (I don't know if any software calls with such seg:off address).
311; This does not apply to XT systems since nothing will write to main BIOS ROM.
312; On AT systems things are quite different, even in protected mode the address
313; is passed in seg:offset form and HMA is accessible in real mode.
314%ifdef USE_AT
315 xor dl, dl
316 eSHL_IM dx, 1
317 dec dx ; Prevents normalization when bytes + offset will be zero
318 add dx, si
319 jc SHORT .NormalizationRequired
320 ret
321.NormalizationRequired:
322%endif ; USE_AT
323
324 NORMALIZE_FAR_POINTER es, si, ax, dx
325%ifdef USE_AT ; CF is always clear for XT builds
326 ; AH = RET_HD_INVALID (01) if CF set, RET_HD_SUCCESS (00) if not. CF unchanged.
327%ifdef USE_386
328 setc ah
329%else
330 sbb ah, ah
331 neg ah
332%endif
333%endif ; USE_AT
334 ret
335
336
337
338; Lookup tables to get transfer function based on bus type
339ALIGN WORD_ALIGN
340g_rgfnPioRead:
341 dw IdePioBlock_ReadFrom16bitDataPort ; 0, DEVICE_16BIT_ATA
342%ifdef MODULE_ADVANCED_ATA
343 dw IdePioBlock_ReadFrom32bitDataPort ; 1, DEVICE_32BIT_ATA
344%elifdef MODULE_8BIT_IDE
345 dw NULL
346%endif ; MODULE_ADVANCED_ATA
347%ifdef MODULE_8BIT_IDE
348 dw IdePioBlock_ReadFrom8bitDataPort ; 2, DEVICE_8BIT_ATA
349 dw IdePioBlock_ReadFromXtideRev1 ; 3, DEVICE_8BIT_XTIDE_REV1
350 dw IdePioBlock_ReadFrom16bitDataPort ; 4, DEVICE_8BIT_XTIDE_REV2
351 dw IdePioBlock_ReadFromXtideRev2_Olivetti ; 5, DEVICE_8BIT_XTIDE_REV2_OLIVETTI
352%ifdef MODULE_8BIT_IDE_ADVANCED
353 dw IdePioBlock_ReadFrom8bitDataPort ; 6, DEVICE_8BIT_XTCF_PIO8
354 dw IdePioBlock_ReadFrom16bitDataPort ; 7, DEVICE_8BIT_XTCF_PIO8_WITH_BIU_OFFLOAD
355 dw IdePioBlock_ReadFrom16bitDataPort ; 8, DEVICE_8BIT_XTCF_PIO16_WITH_BIU_OFFLOAD
356 dw IdeDmaBlock_ReadFromXTCF ; 9, DEVICE_8BIT_XTCF_DMA
357%endif ; MODULE_8BIT_IDE_ADVANCED
358%endif ; MODULE_8BIT_IDE
359
360
361g_rgfnPioWrite:
362 dw IdePioBlock_WriteTo16bitDataPort ; 0, DEVICE_16BIT_ATA
363%ifdef MODULE_ADVANCED_ATA
364 dw IdePioBlock_WriteTo32bitDataPort ; 1, DEVICE_32BIT_ATA
365%elifdef MODULE_8BIT_IDE
366 dw NULL
367%endif ; MODULE_ADVANCED_ATA
368%ifdef MODULE_8BIT_IDE
369 dw IdePioBlock_WriteTo8bitDataPort ; 2, DEVICE_8BIT_ATA
370 dw IdePioBlock_WriteToXtideRev1 ; 3, DEVICE_8BIT_XTIDE_REV1
371 dw IdePioBlock_WriteToXtideRev2 ; 4, DEVICE_8BIT_XTIDE_REV2
372 dw IdePioBlock_WriteToXtideRev2 ; 5, DEVICE_8BIT_XTIDE_REV2_OLIVETTI
373%ifdef MODULE_8BIT_IDE_ADVANCED
374 dw IdePioBlock_WriteTo8bitDataPort ; 6, DEVICE_8BIT_XTCF_PIO8
375 dw IdePioBlock_WriteTo16bitDataPort ; 7, DEVICE_8BIT_XTCF_PIO8_WITH_BIU_OFFLOAD
376 dw IdePioBlock_WriteTo16bitDataPort ; 8, DEVICE_8BIT_XTCF_PIO16_WITH_BIU_OFFLOAD
377 dw IdeDmaBlock_WriteToXTCF ; 9, DEVICE_8BIT_XTCF_DMA
378%endif ; MODULE_8BIT_IDE_ADVANCED
379%endif ; MODULE_8BIT_IDE
Note: See TracBrowser for help on using the repository browser.