source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeTransfer.asm @ 480

Last change on this file since 480 was 480, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • XT-CF DMA transfers should now work.
File size: 9.3 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   IDE Device transfer functions.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Structure containing variables for PIO transfer functions.
21; This struct must not be larger than IDEPACK without INTPACK.
22struc PIOVARS   ; Must not be larger than 9 bytes! See IDEPACK in RamVars.inc.
23    .wDataPort              resb    2   ; 0-1, IDE Data Port
24    .fnXfer                 resb    2   ; 2-3, Offset to transfer function
25    .wSectorsInBlock        resb    2   ; 4-5, Block size in sectors
26    .bSectorsLeft           resb    1   ; 6, Sectors left to transfer
27                            resb    1   ; 7, IDEPACK.bDeviceControl
28    .bSectorsDone           resb    1   ; 8, Number of sectors xferred
29endstruc
30
31
32; Section containing code
33SECTION .text
34
35;--------------------------------------------------------------------
36; IdeTransfer_StartWithCommandInAL
37;   Parameters:
38;       AL:     IDE command that was used to start the transfer
39;               (all PIO read and write commands including Identify Device)
40;       ES:SI:  Ptr to data buffer
41;       DS:DI:  Ptr to DPT (in RAMVARS segment)
42;       SS:BP:  Ptr to IDEPACK
43;   Returns:
44;       AH:     INT 13h Error Code
45;       CX:     Number of successfully transferred sectors
46;       CF:     Cleared if success, Set if error
47;   Corrupts registers:
48;       AL, BX, DX, SI, ES
49;--------------------------------------------------------------------
50ALIGN JUMP_ALIGN
51IdeTransfer_StartWithCommandInAL:
52    ; Are we reading or writing?
53    test    al, 16  ; Bit 4 is cleared on all the read commands but set on 3 of the 4 write commands
54    mov     ah, [bp+IDEPACK.bSectorCount]
55    jnz     SHORT WriteToDrive
56    cmp     al, COMMAND_WRITE_MULTIPLE
57    je      SHORT WriteToDrive
58    ; Fall to ReadFromDrive
59
60;--------------------------------------------------------------------
61; ReadFromDrive
62;   Parameters:
63;       AH:     Number of sectors to transfer (1...128)
64;       ES:SI:  Ptr to buffer to receive data
65;       DS:DI:  Ptr to DPT (in RAMVARS segment)
66;       SS:BP:  Ptr to PIOVARS
67;   Returns:
68;       DS:DI:  Ptr to DPT (in RAMVARS segment)
69;       AH:     BIOS Error code
70;       CX:     Number of successfully transferred sectors
71;       CF:     0 if transfer successful
72;               1 if any error
73;   Corrupts registers:
74;       AL, BX, DX, SI, ES
75;--------------------------------------------------------------------
76ReadFromDrive:
77    ; Prepare to read data to ESSI
78    mov     bx, g_rgfnPioRead
79    call    InitializePiovarsInSSBPwithSectorCountInAH
80
81    ; Wait until drive is ready to transfer
82    call    IdeWait_IRQorDRQ                    ; Wait until ready to transfer
83    jc      SHORT ReturnWithTransferErrorInAH
84    xchg    si, di                              ; ES:DI now points buffer
85
86    mov     cx, [bp+PIOVARS.wSectorsInBlock]    ; Max 128
87
88ALIGN JUMP_ALIGN
89.ReadNextBlockFromDrive:
90    mov     dx, [bp+PIOVARS.wDataPort]
91    cmp     [bp+PIOVARS.bSectorsLeft], cl
92    jbe     SHORT .ReadLastBlockFromDrive
93    call    [bp+PIOVARS.fnXfer]
94
95    ; Wait until ready for next block and check for errors
96    xchg    di, si                              ; DS:DI now points DPT
97    call    IdeWait_IRQorDRQ                    ; Wait until ready to transfer
98    jc      SHORT ReturnWithTransferErrorInAH
99    xchg    si, di                              ; ES:DI now points buffer
100
101    ; Increment number of successfully read sectors
102    mov     cx, [bp+PIOVARS.wSectorsInBlock]
103    sub     [bp+PIOVARS.bSectorsLeft], cl
104    add     [bp+PIOVARS.bSectorsDone], cl
105    jmp     SHORT .ReadNextBlockFromDrive
106
107ALIGN JUMP_ALIGN
108.ReadLastBlockFromDrive:
109    mov     cl, [bp+PIOVARS.bSectorsLeft]       ; CH is already zero
110    push    cx
111    call    [bp+PIOVARS.fnXfer]                 ; Transfer possibly partial block
112
113    ; Check for errors in last block
114    mov     di, si                              ; DS:DI now points DPT
115CheckErrorsAfterTransferringLastBlock:
116    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_BSY)
117    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
118    pop     cx  ; [bp+PIOVARS.bSectorsLeft]
119    jc      SHORT ReturnWithTransferErrorInAH
120
121    ; All sectors successfully transferred
122    add     cx, [bp+PIOVARS.bSectorsDone]       ; Never sets CF
123    ret
124
125    ; Return number of successfully read sectors
126ReturnWithTransferErrorInAH:
127%ifdef USE_386
128    movzx   cx, [bp+PIOVARS.bSectorsDone]
129%else
130    mov     cl, [bp+PIOVARS.bSectorsDone]
131    mov     ch, 0                               ; Preserve CF
132%endif
133    ret
134
135
136;--------------------------------------------------------------------
137; WriteToDrive
138;   Parameters:
139;       AH:     Number of sectors to transfer (1...128)
140;       DS:DI:  Ptr to DPT (in RAMVARS segment)
141;       ES:SI:  Ptr to buffer containing data
142;       SS:BP:  Ptr to PIOVARS
143;   Returns:
144;       AH:     BIOS Error code
145;       CX:     Number of successfully transferred sectors
146;       CF:     0 if transfer successful
147;               1 if any error
148;   Corrupts registers:
149;       AL, BX, DX, SI, ES
150;--------------------------------------------------------------------
151ALIGN JUMP_ALIGN
152WriteToDrive:
153    ; Prepare to write data from ESSI
154    mov     bx, g_rgfnPioWrite
155    call    InitializePiovarsInSSBPwithSectorCountInAH
156
157    ; Always poll when writing first block (IRQs are generated for following blocks)
158    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRQ)
159    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
160    jc      SHORT ReturnWithTransferErrorInAH
161
162    mov     cx, [bp+PIOVARS.wSectorsInBlock]    ; Max 128
163
164ALIGN JUMP_ALIGN
165.WriteNextBlockToDrive:
166    mov     dx, [bp+PIOVARS.wDataPort]
167    cmp     [bp+PIOVARS.bSectorsLeft], cl
168    jbe     SHORT .WriteLastBlockToDrive
169    call    [bp+PIOVARS.fnXfer]
170
171    ; Wait until ready for next block and check for errors
172    call    IdeWait_IRQorDRQ                    ; Wait until ready to transfer
173    jc      SHORT ReturnWithTransferErrorInAH
174
175    ; Increment number of successfully written sectors
176    mov     cx, [bp+PIOVARS.wSectorsInBlock]
177    sub     [bp+PIOVARS.bSectorsLeft], cl
178    add     [bp+PIOVARS.bSectorsDone], cl
179    jmp     SHORT .WriteNextBlockToDrive
180
181ALIGN JUMP_ALIGN
182.WriteLastBlockToDrive:
183    mov     cl, [bp+PIOVARS.bSectorsLeft]       ; CH is already zero
184    push    cx
185%ifdef USE_186
186    push    CheckErrorsAfterTransferringLastBlock
187    jmp     [bp+PIOVARS.fnXfer]                 ; Transfer possibly partial block
188%else
189    call    [bp+PIOVARS.fnXfer]                 ; Transfer possibly partial block
190    jmp     SHORT CheckErrorsAfterTransferringLastBlock
191%endif
192
193
194;--------------------------------------------------------------------
195; InitializePiovarsInSSBPwithSectorCountInAH
196;   Parameters:
197;       AH:     Number of sectors to transfer (1...128)
198;       BX:     Offset to transfer function lookup table
199;       DS:DI:  Ptr to DPT (in RAMVARS segment)
200;       ES:SI:  Ptr to data buffer
201;       SS:BP:  Ptr to PIOVARS
202;   Returns:
203;       Nothing
204;   Corrupts registers:
205;       AX, BX, DX
206;--------------------------------------------------------------------
207ALIGN JUMP_ALIGN
208InitializePiovarsInSSBPwithSectorCountInAH:
209    ; Store sizes and Data Port
210    mov     [bp+PIOVARS.bSectorsLeft], ah
211    mov     ax, [di+DPT.wBasePort]
212    mov     [bp+PIOVARS.wDataPort], ax
213    eMOVZX  ax, [di+DPT_ATA.bBlockSize]
214    mov     [bp+PIOVARS.wSectorsInBlock], ax
215    mov     [bp+PIOVARS.bSectorsDone], ah       ; Zero
216
217    ; Get transfer function based on bus type
218    xchg    ax, bx                              ; Lookup table offset to AX
219    mov     bl, [di+DPT_ATA.bDevice]
220%ifdef MODULE_8BIT_IDE
221    mov     dl, bl
222%endif
223    add     bx, ax
224    mov     ax, [cs:bx]                         ; Load offset to transfer function
225    mov     [bp+PIOVARS.fnXfer], ax
226
227    ; Normalize pointer for PIO-transfers and convert to physical address for DMA transfers
228%ifdef MODULE_8BIT_IDE
229    cmp     dl, DEVICE_8BIT_XTCF_DMA
230    jb      SHORT IdeTransfer_NormalizePointerInESSI
231
232    ; Convert ES:SI to physical address
233    xor     dx, dx
234    mov     ax, es
235%rep 4
236    shl     ax, 1
237    rcl     dx, 1
238%endrep
239    add     si, ax
240    adc     dl, dh
241    mov     es, dx
242    ret
243%endif ; MODULE_8BIT_IDE
244    ; Fall to IdeTransfer_NormalizePointerInESSI if no MODULE_8BIT_IDE
245
246
247;--------------------------------------------------------------------
248; IdeTransfer_NormalizePointerInESSI
249;   Parameters:
250;       ES:SI:  Ptr to be normalized
251;   Returns:
252;       ES:SI:  Normalized pointer (SI = 0...15)
253;   Corrupts registers:
254;       AX, DX
255;--------------------------------------------------------------------
256IdeTransfer_NormalizePointerInESSI:
257    NORMALIZE_FAR_POINTER   es, si, ax, dx
258    ret
259
260
261; Lookup tables to get transfer function based on bus type
262ALIGN WORD_ALIGN
263g_rgfnPioRead:
264        dw      IdePioBlock_ReadFrom16bitDataPort   ; 0, DEVICE_16BIT_ATA
265        dw      IdePioBlock_ReadFrom32bitDataPort   ; 1, DEVICE_32BIT_ATA
266%ifdef MODULE_8BIT_IDE
267        dw      IdePioBlock_ReadFrom8bitDataPort    ; 2, DEVICE_8BIT_ATA
268        dw      IdePioBlock_ReadFromXtideRev1       ; 3, DEVICE_8BIT_XTIDE_REV1     
269        dw      IdePioBlock_ReadFromXtideRev2       ; 4, DEVICE_8BIT_XTIDE_REV2
270        dw      IdePioBlock_ReadFrom8bitDataPort    ; 5, DEVICE_8BIT_XTCF_PIO8
271        dw      IdeDmaBlock_ReadFromXTCF            ; 6, DEVICE_8BIT_XTCF_DMA
272%endif
273
274
275g_rgfnPioWrite:
276        dw      IdePioBlock_WriteTo16bitDataPort    ; 0, DEVICE_16BIT_ATA
277        dw      IdePioBlock_WriteTo32bitDataPort    ; 1, DEVICE_32BIT_ATA
278%ifdef MODULE_8BIT_IDE
279        dw      IdePioBlock_WriteTo8bitDataPort     ; 2, DEVICE_8BIT_ATA
280        dw      IdePioBlock_WriteToXtideRev1        ; 3, DEVICE_8BIT_XTIDE_REV1
281        dw      IdePioBlock_WriteToXtideRev2        ; 4, DEVICE_8BIT_XTIDE_REV2
282        dw      IdePioBlock_WriteTo8bitDataPort     ; 5, DEVICE_8BIT_XTCF_PIO8
283        dw      IdeDmaBlock_WriteToXTCF             ; 6, DEVICE_8BIT_XTCF_DMA
284%endif
Note: See TracBrowser for help on using the repository browser.