1 | ; Project name : XTIDE Universal BIOS
|
---|
2 | ; Description : IDE Device transfer functions.
|
---|
3 |
|
---|
4 | ; Structure containing variables for PIO transfer functions.
|
---|
5 | ; This struct must not be larger than IDEPACK without INTPACK.
|
---|
6 | struc PIOVARS
|
---|
7 | .wBlocksLeft resb 2
|
---|
8 | .wBlockSize resb 2 ; Block size in WORDs (256...32768)
|
---|
9 | .wDataPort resb 2
|
---|
10 | .bSectorsInLastBlock: resb 1
|
---|
11 | resb 1 ; Offset 7 = IDEPACK.bDeviceControl
|
---|
12 | .fnXfer resb 2 ; Offset to transfer function
|
---|
13 | endstruc
|
---|
14 |
|
---|
15 |
|
---|
16 | ; Section containing code
|
---|
17 | SECTION .text
|
---|
18 |
|
---|
19 | ;--------------------------------------------------------------------
|
---|
20 | ; IdeTransfer_StartWithCommandInAL
|
---|
21 | ; Parameters:
|
---|
22 | ; AL: IDE command that was used to start the transfer
|
---|
23 | ; ES:SI: Ptr to destination buffer or source data
|
---|
24 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
---|
25 | ; SS:BP: Ptr to IDEPACK
|
---|
26 | ; Returns:
|
---|
27 | ; AH: INT 13h Error Code
|
---|
28 | ; CF: Cleared if success, Set if error
|
---|
29 | ; Corrupts registers:
|
---|
30 | ; AL, BX, CX, DX, SI, ES
|
---|
31 | ;--------------------------------------------------------------------
|
---|
32 | ALIGN JUMP_ALIGN
|
---|
33 | IdeTransfer_StartWithCommandInAL:
|
---|
34 | mov ah, [bp+IDEPACK.bSectorCountHighExt]
|
---|
35 |
|
---|
36 | ; Are we reading or writing?
|
---|
37 | test al, 16 ; Bit 4 is cleared on all the read commands but set on 3 of the 4 write commands
|
---|
38 | jnz SHORT .PrepareToWriteDataFromESSI
|
---|
39 | cmp al, COMMAND_WRITE_MULTIPLE
|
---|
40 | je SHORT .PrepareToWriteDataFromESSI
|
---|
41 |
|
---|
42 | ; Prepare to read data to ESSI
|
---|
43 | mov bx, g_rgfnPioRead
|
---|
44 | mov al, [bp+IDEPACK.bSectorCount]
|
---|
45 | call InitializePiovarsInSSBPwithSectorCountInAX
|
---|
46 | xchg si, di
|
---|
47 | call Registers_NormalizeESDI
|
---|
48 | jmp SHORT ReadFromDrive
|
---|
49 |
|
---|
50 | ALIGN JUMP_ALIGN
|
---|
51 | .PrepareToWriteDataFromESSI:
|
---|
52 | mov bx, g_rgfnPioWrite
|
---|
53 | mov al, [bp+IDEPACK.bSectorCount]
|
---|
54 | call InitializePiovarsInSSBPwithSectorCountInAX
|
---|
55 | call Registers_NormalizeESSI
|
---|
56 | ; Fall to WriteToDrive
|
---|
57 |
|
---|
58 |
|
---|
59 | ;--------------------------------------------------------------------
|
---|
60 | ; WriteToDrive
|
---|
61 | ; Parameters:
|
---|
62 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
---|
63 | ; ES:SI: Normalized ptr to buffer containing data
|
---|
64 | ; SS:BP: Ptr to PIOVARS
|
---|
65 | ; Returns:
|
---|
66 | ; AH: BIOS Error code
|
---|
67 | ; CF: 0 if transfer succesfull
|
---|
68 | ; 1 if any error
|
---|
69 | ; Corrupts registers:
|
---|
70 | ; AL, BX, CX, DX, SI, ES
|
---|
71 | ;--------------------------------------------------------------------
|
---|
72 | WriteToDrive:
|
---|
73 | ; Always poll when writing first block (IRQs are generated for following blocks)
|
---|
74 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRQ)
|
---|
75 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
---|
76 | jc SHORT .ReturnWithTransferErrorInAH
|
---|
77 | ALIGN JUMP_ALIGN
|
---|
78 | .WriteNextBlock:
|
---|
79 | mov dx, [bp+PIOVARS.wDataPort]
|
---|
80 | dec WORD [bp+PIOVARS.wBlocksLeft] ; Transferring last (possibly partial) block?
|
---|
81 | jz SHORT .XferLastBlock ; If so, jump to transfer
|
---|
82 | mov cx, [bp+PIOVARS.wBlockSize] ; Load block size in WORDs
|
---|
83 | call [bp+PIOVARS.fnXfer] ; Transfer full block
|
---|
84 |
|
---|
85 | ; Normalize pointer when necessary
|
---|
86 | mov ax, si
|
---|
87 | shr ax, 1 ; WORD offset
|
---|
88 | add ax, [bp+PIOVARS.wBlockSize]
|
---|
89 | jns SHORT .WaitUntilReadyToTransferNextBlock
|
---|
90 | call Registers_NormalizeESSI
|
---|
91 |
|
---|
92 | ALIGN JUMP_ALIGN
|
---|
93 | .WaitUntilReadyToTransferNextBlock:
|
---|
94 | %ifdef USE_186
|
---|
95 | push .WriteNextBlock
|
---|
96 | jmp IdeWait_IRQorDRQ
|
---|
97 | %else
|
---|
98 | call IdeWait_IRQorDRQ
|
---|
99 | jnc SHORT .WriteNextBlock
|
---|
100 | %endif
|
---|
101 | .ReturnWithTransferErrorInAH:
|
---|
102 | ret
|
---|
103 |
|
---|
104 | ALIGN JUMP_ALIGN
|
---|
105 | .XferLastBlock:
|
---|
106 | xor cx, cx
|
---|
107 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRDY)
|
---|
108 | mov ch, [bp+PIOVARS.bSectorsInLastBlock]; CX = Partial block size in WORDs
|
---|
109 | %ifdef USE_186
|
---|
110 | push IdeWait_IRQorStatusFlagInBLwithTimeoutInBH
|
---|
111 | jmp [bp+PIOVARS.fnXfer]
|
---|
112 | %else
|
---|
113 | call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block
|
---|
114 | jmp IdeWait_IRQorStatusFlagInBLwithTimeoutInBH ; Check for errors
|
---|
115 | %endif
|
---|
116 |
|
---|
117 |
|
---|
118 | ;--------------------------------------------------------------------
|
---|
119 | ; ReadFromDrive
|
---|
120 | ; Parameters:
|
---|
121 | ; ES:DI: Normalized ptr to buffer to recieve data
|
---|
122 | ; DS:SI: Ptr to DPT (in RAMVARS segment)
|
---|
123 | ; SS:BP: Ptr to PIOVARS
|
---|
124 | ; Returns:
|
---|
125 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
---|
126 | ; AH: BIOS Error code
|
---|
127 | ; CF: 0 if transfer succesfull
|
---|
128 | ; 1 if any error
|
---|
129 | ; Corrupts registers:
|
---|
130 | ; AL, BX, CX, DX, SI, ES
|
---|
131 | ;--------------------------------------------------------------------
|
---|
132 | ALIGN JUMP_ALIGN
|
---|
133 | ReadFromDrive:
|
---|
134 | ; Wait until drive is ready to transfer
|
---|
135 | xchg di, si ; DS:DI now points DPT
|
---|
136 | call IdeWait_IRQorDRQ ; Wait until ready to transfer
|
---|
137 | jc SHORT WriteToDrive.ReturnWithTransferErrorInAH
|
---|
138 | xchg si, di ; ES:DI now points buffer
|
---|
139 |
|
---|
140 | ; Transfer full or last (possible partial) block
|
---|
141 | mov dx, [bp+PIOVARS.wDataPort]
|
---|
142 | dec WORD [bp+PIOVARS.wBlocksLeft]
|
---|
143 | jz SHORT .XferLastBlock
|
---|
144 | mov cx, [bp+PIOVARS.wBlockSize] ; Load block size in WORDs
|
---|
145 | call [bp+PIOVARS.fnXfer] ; Transfer full block
|
---|
146 |
|
---|
147 | ; Normalize pointer when necessary
|
---|
148 | mov ax, di
|
---|
149 | shr ax, 1 ; WORD offset
|
---|
150 | add ax, [bp+PIOVARS.wBlockSize]
|
---|
151 | jns SHORT ReadFromDrive
|
---|
152 | call Registers_NormalizeESDI
|
---|
153 | jmp SHORT ReadFromDrive ; Loop while blocks left
|
---|
154 |
|
---|
155 | ALIGN JUMP_ALIGN
|
---|
156 | .XferLastBlock:
|
---|
157 | xor cx, cx
|
---|
158 | mov ch, [bp+PIOVARS.bSectorsInLastBlock]; CX = Partial block size in WORDs
|
---|
159 | call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block
|
---|
160 | mov di, si ; DS:DI now points DPT
|
---|
161 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRDY)
|
---|
162 | jmp IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
---|
163 |
|
---|
164 |
|
---|
165 | ;--------------------------------------------------------------------
|
---|
166 | ; InitializePiovarsInSSBPwithSectorCountInAX
|
---|
167 | ; Parameters:
|
---|
168 | ; AX: Number of sectors to transfer (1...65535)
|
---|
169 | ; BX: Offset to transfer function lookup table
|
---|
170 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
---|
171 | ; SS:BP: Ptr to PIOVARS
|
---|
172 | ; Returns:
|
---|
173 | ; Nothing
|
---|
174 | ; Corrupts registers:
|
---|
175 | ; AX, BX, CX, DX
|
---|
176 | ;--------------------------------------------------------------------
|
---|
177 | ALIGN JUMP_ALIGN
|
---|
178 | InitializePiovarsInSSBPwithSectorCountInAX:
|
---|
179 | ; Store number of blocks to transfer
|
---|
180 | eMOVZX cx, BYTE [di+DPT_ATA.bSetBlock] ; Block size in sectors
|
---|
181 | xor dx, dx ; DX:AX = Sectors to transfer (1...65535)
|
---|
182 | div cx ; AX = Full blocks to transfer
|
---|
183 | test dx, dx
|
---|
184 | mov dh, cl ; DH = Full block size if no partial blocks to transfer
|
---|
185 | jz SHORT .NoPartialBlocksToTransfer
|
---|
186 | inc ax ; Partial block
|
---|
187 | mov dh, dl ; DH = Size of partial block in sectors
|
---|
188 | .NoPartialBlocksToTransfer:
|
---|
189 | mov [bp+PIOVARS.wBlocksLeft], ax
|
---|
190 | mov [bp+PIOVARS.bSectorsInLastBlock], dh
|
---|
191 |
|
---|
192 | ; Store block size in WORDs
|
---|
193 | xchg ch, cl ; CX = Block size in WORDs
|
---|
194 | mov [bp+PIOVARS.wBlockSize], cx
|
---|
195 |
|
---|
196 | ; Get transfer function based on bus type
|
---|
197 | xchg ax, bx ; Lookup table offset to AX
|
---|
198 | eMOVZX bx, BYTE [di+DPT.bIdevarsOffset] ; CS:BX now points to IDEVARS
|
---|
199 | mov dx, [cs:bx+IDEVARS.wPort] ; Load IDE Data port address
|
---|
200 | mov bl, [cs:bx+IDEVARS.bDevice] ; Load device type to BX
|
---|
201 | add bx, ax
|
---|
202 | mov ax, [cs:bx] ; Load offset to transfer function
|
---|
203 | mov [bp+PIOVARS.wDataPort], dx
|
---|
204 | mov [bp+PIOVARS.fnXfer], ax
|
---|
205 | ret
|
---|
206 |
|
---|
207 |
|
---|
208 | ;--------------------------------------------------------------------
|
---|
209 | ; DualByteReadForXtide Dual port 8-bit XTIDE PIO read transfer
|
---|
210 | ; SingleByteRead Single port 8-bit PIO read transfer
|
---|
211 | ; WordReadForXTIDEmod 8088/8086 compatible 16-bit IDE PIO read transfer
|
---|
212 | ; WordReadForXTplusAndAT Normal 16-bit IDE PIO read transfer
|
---|
213 | ; DWordRead VLB/PCI 32-bit IDE PIO read transfer
|
---|
214 | ; Parameters:
|
---|
215 | ; CX: Block size in WORDs
|
---|
216 | ; DX: IDE Data port address
|
---|
217 | ; ES:DI: Normalized ptr to buffer to recieve data
|
---|
218 | ; Returns:
|
---|
219 | ; Nothing
|
---|
220 | ; Corrupts registers:
|
---|
221 | ; AX, BX, CX
|
---|
222 | ;--------------------------------------------------------------------
|
---|
223 | ALIGN JUMP_ALIGN
|
---|
224 | DualByteReadForXtide:
|
---|
225 | %ifdef USE_186
|
---|
226 | shr cx, 2 ; Smaller but slower on 186/286
|
---|
227 | %else
|
---|
228 | times 2 shr cx, 1 ; Loop unrolling
|
---|
229 | %endif
|
---|
230 | mov bx, 8 ; Bit mask for toggling data low/high reg
|
---|
231 | ALIGN JUMP_ALIGN
|
---|
232 | .InswLoop:
|
---|
233 | XTIDE_INSW
|
---|
234 | XTIDE_INSW
|
---|
235 | XTIDE_INSW
|
---|
236 | XTIDE_INSW
|
---|
237 | loop .InswLoop
|
---|
238 | ret
|
---|
239 |
|
---|
240 | ;----
|
---|
241 | ALIGN JUMP_ALIGN
|
---|
242 | SingleByteRead:
|
---|
243 | %ifdef USE_186 ; INS instruction available
|
---|
244 | shl cx, 1 ; WORD count to BYTE count
|
---|
245 | rep insb
|
---|
246 | %else ; If 8088/8086
|
---|
247 | shr cx, 1 ; WORD count to DWORD count
|
---|
248 | ALIGN JUMP_ALIGN
|
---|
249 | .InsdLoop:
|
---|
250 | in al, dx
|
---|
251 | stosb ; Store to [ES:DI]
|
---|
252 | in al, dx
|
---|
253 | stosb
|
---|
254 | in al, dx
|
---|
255 | stosb
|
---|
256 | in al, dx
|
---|
257 | stosb
|
---|
258 | loop .InsdLoop
|
---|
259 | %endif
|
---|
260 | ret
|
---|
261 |
|
---|
262 | ;----
|
---|
263 | %ifndef USE_186
|
---|
264 | ALIGN JUMP_ALIGN
|
---|
265 | WordReadForXTIDEmod:
|
---|
266 | times 2 shr cx, 1 ; WORD count to QWORD count
|
---|
267 | ALIGN JUMP_ALIGN
|
---|
268 | .ReadNextQword:
|
---|
269 | in ax, dx ; Read 1st WORD
|
---|
270 | stosw ; Store 1st WORD to [ES:DI]
|
---|
271 | in ax, dx
|
---|
272 | stosw ; 2nd
|
---|
273 | in ax, dx
|
---|
274 | stosw ; 3rd
|
---|
275 | in ax, dx
|
---|
276 | stosw ; 4th
|
---|
277 | loop .ReadNextQword
|
---|
278 | ret
|
---|
279 | %endif
|
---|
280 |
|
---|
281 | ;----
|
---|
282 | ALIGN JUMP_ALIGN
|
---|
283 | WordReadForXTplusAndAT:
|
---|
284 | rep
|
---|
285 | db 6Dh ; INSW (we want this in XT build)
|
---|
286 | ret
|
---|
287 |
|
---|
288 | ;----
|
---|
289 | ALIGN JUMP_ALIGN
|
---|
290 | DWordRead:
|
---|
291 | shr cx, 1 ; WORD count to DWORD count
|
---|
292 | rep
|
---|
293 | db 66h ; Override operand size to 32-bit
|
---|
294 | db 6Dh ; INSW/INSD
|
---|
295 | ret
|
---|
296 |
|
---|
297 |
|
---|
298 | ;--------------------------------------------------------------------
|
---|
299 | ; DualByteWriteForXtide Dual port 8-bit XTIDE PIO write transfer
|
---|
300 | ; SingleByteWrite Single port 8-bit PIO write transfer
|
---|
301 | ; WordWriteForXTIDEmod 8088/8086 compatible 16-bit IDE PIO read transfer
|
---|
302 | ; WordWrite Normal 16-bit IDE PIO write transfer
|
---|
303 | ; DWordWrite VLB/PCI 32-bit IDE PIO write transfer
|
---|
304 | ; Parameters:
|
---|
305 | ; CX: Block size in WORDs
|
---|
306 | ; DX: IDE Data port address
|
---|
307 | ; ES:SI: Normalized ptr to buffer containing data
|
---|
308 | ; Returns:
|
---|
309 | ; Nothing
|
---|
310 | ; Corrupts registers:
|
---|
311 | ; AX, CX
|
---|
312 | ;--------------------------------------------------------------------
|
---|
313 | ALIGN JUMP_ALIGN
|
---|
314 | DualByteWriteForXtide:
|
---|
315 | push ds
|
---|
316 | push bx
|
---|
317 | %ifdef USE_186
|
---|
318 | shr cx, 2 ; Smaller but slower on 186/286
|
---|
319 | %else
|
---|
320 | times 2 shr cx, 1 ; Loop unrolling
|
---|
321 | %endif
|
---|
322 | mov bx, 8 ; Bit mask for toggling data low/high reg
|
---|
323 | push es ; Copy ES...
|
---|
324 | pop ds ; ...to DS
|
---|
325 | ALIGN JUMP_ALIGN
|
---|
326 | .OutswLoop:
|
---|
327 | XTIDE_OUTSW
|
---|
328 | XTIDE_OUTSW
|
---|
329 | XTIDE_OUTSW
|
---|
330 | XTIDE_OUTSW
|
---|
331 | loop .OutswLoop
|
---|
332 | pop bx
|
---|
333 | pop ds
|
---|
334 | ret
|
---|
335 |
|
---|
336 | ;----
|
---|
337 | ALIGN JUMP_ALIGN
|
---|
338 | SingleByteWrite:
|
---|
339 | %ifdef USE_186 ; OUTS instruction available
|
---|
340 | shl cx, 1 ; WORD count to BYTE count
|
---|
341 | eSEG es ; Source is ES segment
|
---|
342 | rep outsb
|
---|
343 | %else ; If 8088/8086
|
---|
344 | shr cx, 1 ; WORD count to DWORD count
|
---|
345 | push ds ; Store DS
|
---|
346 | push es ; Copy ES...
|
---|
347 | pop ds ; ...to DS
|
---|
348 | ALIGN JUMP_ALIGN
|
---|
349 | .OutsdLoop:
|
---|
350 | lodsb ; Load from [DS:SI] to AL
|
---|
351 | out dx, al
|
---|
352 | lodsb
|
---|
353 | out dx, al
|
---|
354 | lodsb
|
---|
355 | out dx, al
|
---|
356 | lodsb
|
---|
357 | out dx, al
|
---|
358 | loop .OutsdLoop
|
---|
359 | pop ds ; Restore DS
|
---|
360 | %endif
|
---|
361 | ret
|
---|
362 |
|
---|
363 | ;---
|
---|
364 | ALIGN JUMP_ALIGN
|
---|
365 | WordWriteForXTIDEmod:
|
---|
366 | push ds
|
---|
367 | %ifdef USE_186
|
---|
368 | shr cx, 2 ; Smaller but slower on 186/286
|
---|
369 | %else
|
---|
370 | times 2 shr cx, 1 ; Loop unrolling
|
---|
371 | %endif
|
---|
372 | push es ; Copy ES...
|
---|
373 | pop ds ; ...to DS
|
---|
374 | ALIGN JUMP_ALIGN
|
---|
375 | .WriteNextQword:
|
---|
376 | XTIDE_MOD_OUTSW
|
---|
377 | XTIDE_MOD_OUTSW
|
---|
378 | XTIDE_MOD_OUTSW
|
---|
379 | XTIDE_MOD_OUTSW
|
---|
380 | loop .WriteNextQword
|
---|
381 | pop ds
|
---|
382 | ret
|
---|
383 |
|
---|
384 | ;----
|
---|
385 | ALIGN JUMP_ALIGN
|
---|
386 | WordWrite:
|
---|
387 | eSEG es ; Source is ES segment
|
---|
388 | rep
|
---|
389 | db 6Fh ; OUTSW (we want this in XT build)
|
---|
390 | ret
|
---|
391 |
|
---|
392 | ALIGN JUMP_ALIGN
|
---|
393 | DWordWrite:
|
---|
394 | shr cx, 1 ; WORD count to DWORD count
|
---|
395 | eSEG es ; Source is ES segment
|
---|
396 | rep
|
---|
397 | db 66h ; Override operand size to 32-bit
|
---|
398 | db 6Fh ; OUTSW/OUTSD
|
---|
399 | ret
|
---|
400 |
|
---|
401 |
|
---|
402 |
|
---|
403 | ; Lookup tables to get transfer function based on bus type
|
---|
404 | ALIGN WORD_ALIGN
|
---|
405 | g_rgfnPioRead:
|
---|
406 | dw DualByteReadForXtide ; DEVICE_8BIT_DUAL_PORT_XTIDE
|
---|
407 | %ifdef USE_186
|
---|
408 | dw WordReadForXTplusAndAT ; DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
|
---|
409 | %else
|
---|
410 | dw WordReadForXTIDEmod
|
---|
411 | %endif
|
---|
412 | dw SingleByteRead ; DEVICE_8BIT_SINGLE_PORT
|
---|
413 | dw WordReadForXTplusAndAT ; DEVICE_16BIT_ATA
|
---|
414 | dw DWordRead ; DEVICE_32BIT_ATA
|
---|
415 |
|
---|
416 | g_rgfnPioWrite:
|
---|
417 | dw DualByteWriteForXtide ; DEVICE_8BIT_DUAL_PORT_XTIDE
|
---|
418 | dw WordWriteForXTIDEmod ; DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
|
---|
419 | dw SingleByteWrite ; DEVICE_8BIT_SINGLE_PORT
|
---|
420 | dw WordWrite ; DEVICE_16BIT_ATA
|
---|
421 | dw DWordWrite ; DEVICE_32BIT_ATA
|
---|