source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeTransfer.asm @ 157

Last change on this file since 157 was 157, checked in by krille_n_@…, 13 years ago

Changes to the XTIDE Universal BIOS:

  • Size optimizations in IdeTransfer.asm and IdeCommand.asm (saved 12 bytes).
File size: 11.3 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   IDE Device transfer functions.
3
4; Structure containing variables for PIO transfer functions.
5; This struct must not be larger than IDEPACK without INTPACK.
6struc PIOVARS
7    .wBlocksLeft            resb    2
8    .wBlockSize             resb    2   ; Block size in WORDs (256...32768)
9    .wDataPort              resb    2
10    .bSectorsInLastBlock:   resb    1
11                            resb    1   ; Offset 7 = IDEPACK.bDeviceControl
12    .fnXfer                 resb    2   ; Offset to transfer function
13endstruc
14
15
16; Section containing code
17SECTION .text
18
19;--------------------------------------------------------------------
20; IdeTransfer_StartWithCommandInAL
21;   Parameters:
22;       AL:     IDE command that was used to start the transfer
23;       ES:SI:  Ptr to destination buffer or source data
24;       DS:DI:  Ptr to DPT (in RAMVARS segment)
25;       SS:BP:  Ptr to IDEPACK
26;   Returns:
27;       AH:     INT 13h Error Code
28;       CF:     Cleared if success, Set if error
29;   Corrupts registers:
30;       AL, BX, CX, DX, SI, ES
31;--------------------------------------------------------------------
32ALIGN JUMP_ALIGN
33IdeTransfer_StartWithCommandInAL:
34    mov     ah, [bp+IDEPACK.bSectorCountHighExt]
35
36    ; Are we reading or writing?
37    test    al, 16  ; Bit 4 is cleared on all the read commands but set on 3 of the 4 write commands
38    jnz     SHORT .PrepareToWriteDataFromESSI
39    cmp     al, COMMAND_WRITE_MULTIPLE
40    je      SHORT .PrepareToWriteDataFromESSI
41
42    ; Prepare to read data to ESSI
43    mov     bx, g_rgfnPioRead
44    mov     al, [bp+IDEPACK.bSectorCount]
45    call    InitializePiovarsInSSBPwithSectorCountInAX
46    xchg    si, di
47    call    Registers_NormalizeESDI
48    jmp     SHORT ReadFromDrive
49
50ALIGN JUMP_ALIGN
51.PrepareToWriteDataFromESSI:
52    mov     bx, g_rgfnPioWrite
53    mov     al, [bp+IDEPACK.bSectorCount]
54    call    InitializePiovarsInSSBPwithSectorCountInAX
55    call    Registers_NormalizeESSI
56    ; Fall to WriteToDrive
57
58
59;--------------------------------------------------------------------
60; WriteToDrive
61;   Parameters:
62;       DS:DI:  Ptr to DPT (in RAMVARS segment)
63;       ES:SI:  Normalized ptr to buffer containing data
64;       SS:BP:  Ptr to PIOVARS
65;   Returns:
66;       AH:     BIOS Error code
67;       CF:     0 if transfer succesfull
68;               1 if any error
69;   Corrupts registers:
70;       AL, BX, CX, DX, SI, ES
71;--------------------------------------------------------------------
72WriteToDrive:
73    ; Always poll when writing first block (IRQs are generated for following blocks)
74    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRQ)
75    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
76    jc      SHORT .ReturnWithTransferErrorInAH
77ALIGN JUMP_ALIGN
78.WriteNextBlock:
79    mov     dx, [bp+PIOVARS.wDataPort]
80    dec     WORD [bp+PIOVARS.wBlocksLeft]       ; Transferring last (possibly partial) block?
81    jz      SHORT .XferLastBlock                ;  If so, jump to transfer
82    mov     cx, [bp+PIOVARS.wBlockSize]         ; Load block size in WORDs
83    call    [bp+PIOVARS.fnXfer]                 ; Transfer full block
84
85    ; Normalize pointer when necessary
86    mov     ax, si
87    shr     ax, 1                               ; WORD offset
88    add     ax, [bp+PIOVARS.wBlockSize]
89    jns     SHORT .WaitUntilReadyToTransferNextBlock
90    call    Registers_NormalizeESSI
91
92ALIGN JUMP_ALIGN
93.WaitUntilReadyToTransferNextBlock:
94%ifdef USE_186
95    push    .WriteNextBlock
96    jmp     IdeWait_IRQorDRQ
97%else
98    call    IdeWait_IRQorDRQ
99    jnc     SHORT .WriteNextBlock
100%endif
101.ReturnWithTransferErrorInAH:
102    ret
103
104ALIGN JUMP_ALIGN
105.XferLastBlock:
106    xor     cx, cx
107    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRDY)
108    mov     ch, [bp+PIOVARS.bSectorsInLastBlock]; CX = Partial block size in WORDs
109%ifdef USE_186
110    push    IdeWait_IRQorStatusFlagInBLwithTimeoutInBH
111    jmp     [bp+PIOVARS.fnXfer]
112%else
113    call    [bp+PIOVARS.fnXfer]                 ; Transfer possibly partial block
114    jmp     IdeWait_IRQorStatusFlagInBLwithTimeoutInBH  ; Check for errors
115%endif
116
117
118;--------------------------------------------------------------------
119; ReadFromDrive
120;   Parameters:
121;       ES:DI:  Normalized ptr to buffer to recieve data
122;       DS:SI:  Ptr to DPT (in RAMVARS segment)
123;       SS:BP:  Ptr to PIOVARS
124;   Returns:
125;       DS:DI:  Ptr to DPT (in RAMVARS segment)
126;       AH:     BIOS Error code
127;       CF:     0 if transfer succesfull
128;               1 if any error
129;   Corrupts registers:
130;       AL, BX, CX, DX, SI, ES
131;--------------------------------------------------------------------
132ALIGN JUMP_ALIGN
133ReadFromDrive:
134    ; Wait until drive is ready to transfer
135    xchg    di, si                              ; DS:DI now points DPT
136    call    IdeWait_IRQorDRQ                    ; Wait until ready to transfer
137    jc      SHORT WriteToDrive.ReturnWithTransferErrorInAH
138    xchg    si, di                              ; ES:DI now points buffer
139
140    ; Transfer full or last (possible partial) block
141    mov     dx, [bp+PIOVARS.wDataPort]
142    dec     WORD [bp+PIOVARS.wBlocksLeft]
143    jz      SHORT .XferLastBlock
144    mov     cx, [bp+PIOVARS.wBlockSize]         ; Load block size in WORDs
145    call    [bp+PIOVARS.fnXfer]                 ; Transfer full block
146
147    ; Normalize pointer when necessary
148    mov     ax, di
149    shr     ax, 1                               ; WORD offset
150    add     ax, [bp+PIOVARS.wBlockSize]
151    jns     SHORT ReadFromDrive
152    call    Registers_NormalizeESDI
153    jmp     SHORT ReadFromDrive                 ; Loop while blocks left
154
155ALIGN JUMP_ALIGN
156.XferLastBlock:
157    xor     cx, cx
158    mov     ch, [bp+PIOVARS.bSectorsInLastBlock]; CX = Partial block size in WORDs
159    call    [bp+PIOVARS.fnXfer]                 ; Transfer possibly partial block
160    mov     di, si                              ; DS:DI now points DPT
161    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRDY)
162    jmp     IdeWait_PollStatusFlagInBLwithTimeoutInBH
163
164
165;--------------------------------------------------------------------
166; InitializePiovarsInSSBPwithSectorCountInAX
167;   Parameters:
168;       AX:     Number of sectors to transfer (0=65536)
169;       BX:     Offset to transfer function lookup table
170;       DS:DI:  Ptr to DPT (in RAMVARS segment)
171;       SS:BP:  Ptr to PIOVARS
172;   Returns:
173;       Nothing
174;   Corrupts registers:
175;       AX, BX, CX, DX
176;--------------------------------------------------------------------
177ALIGN JUMP_ALIGN
178InitializePiovarsInSSBPwithSectorCountInAX:
179    ; Store number of blocks to transfer
180    eMOVZX  cx, BYTE [di+DPT_ATA.bSetBlock]     ; Block size in sectors
181    xor     dx, dx
182    test    ax, ax
183    eCMOVZ  dl, 1       ; DX:AX = Sectors to transfer (1...65536)
184    div     cx          ; AX = Full blocks to transfer
185    test    dx, dx
186    mov     dh, cl      ; DH = Full block size if no partial blocks to transfer
187    jz      SHORT .NoPartialBlocksToTransfer
188    inc     ax          ; Partial block
189    mov     dh, dl      ; DH = Size of partial block in sectors
190.NoPartialBlocksToTransfer:
191    mov     [bp+PIOVARS.wBlocksLeft], ax
192    mov     [bp+PIOVARS.bSectorsInLastBlock], dh
193
194    ; Store block size in WORDs
195    xchg    ch, cl      ; CX = Block size in WORDs
196    mov     [bp+PIOVARS.wBlockSize], cx
197
198    ; Get transfer function based on bus type
199    xchg    ax, bx
200    eMOVZX  bx, BYTE [di+DPT.bIdevarsOffset]    ; CS:BX now points to IDEVARS
201    mov     dx, [cs:bx+IDEVARS.wPort]           ; Load IDE Data port address
202    mov     bl, [cs:bx+IDEVARS.bDevice]         ; Load device type to BX
203    add     bx, ax
204    mov     ax, [cs:bx]                         ; Load offset to transfer function
205    mov     [bp+PIOVARS.wDataPort], dx
206    mov     [bp+PIOVARS.fnXfer], ax
207    ret
208
209
210;--------------------------------------------------------------------
211; DualByteReadForXtide      Dual port 8-bit XTIDE PIO read transfer
212; SingleByteRead            Single port 8-bit PIO read transfer
213; WordReadForXTIDEmod       8088/8086 compatible 16-bit IDE PIO read transfer
214; WordReadForXTplusAndAT    Normal 16-bit IDE PIO read transfer
215; DWordRead                 VLB/PCI 32-bit IDE PIO read transfer
216;   Parameters:
217;       CX:     Block size in WORDs
218;       DX:     IDE Data port address
219;       ES:DI:  Normalized ptr to buffer to recieve data
220;   Returns:
221;       Nothing
222;   Corrupts registers:
223;       AX, BX, CX
224;--------------------------------------------------------------------
225ALIGN JUMP_ALIGN
226DualByteReadForXtide:
227    times 2 shr cx, 1   ; Loop unrolling
228    mov     bx, 8       ; Bit mask for toggling data low/high reg
229ALIGN JUMP_ALIGN
230.InswLoop:
231    XTIDE_INSW
232    XTIDE_INSW
233    XTIDE_INSW
234    XTIDE_INSW
235    loop    .InswLoop
236    ret
237
238;----
239ALIGN JUMP_ALIGN
240SingleByteRead:
241%ifdef USE_186  ; INS instruction available
242    shl     cx, 1       ; WORD count to BYTE count
243    rep insb
244%else           ; If 8088/8086
245    shr     cx, 1       ; WORD count to DWORD count
246ALIGN JUMP_ALIGN
247.InsdLoop:
248    in      al, dx
249    stosb               ; Store to [ES:DI]
250    in      al, dx
251    stosb
252    in      al, dx
253    stosb
254    in      al, dx
255    stosb
256    loop    .InsdLoop
257%endif
258    ret
259
260;----
261%ifndef USE_186
262ALIGN JUMP_ALIGN
263WordReadForXTIDEmod:
264    times 2 shr cx, 1   ; WORD count to QWORD count
265ALIGN JUMP_ALIGN
266.ReadNextQword:
267    in      ax, dx      ; Read 1st WORD
268    stosw               ; Store 1st WORD to [ES:DI]
269    in      ax, dx
270    stosw               ; 2nd
271    in      ax, dx
272    stosw               ; 3rd
273    in      ax, dx
274    stosw               ; 4th
275    loop    .ReadNextQword
276    ret
277%endif
278
279;----
280ALIGN JUMP_ALIGN
281WordReadForXTplusAndAT:
282    rep
283    db      6Dh         ; INSW (we want this in XT build)
284    ret
285
286;----
287ALIGN JUMP_ALIGN
288DWordRead:
289    shr     cx, 1       ; WORD count to DWORD count
290    rep
291    db      66h         ; Override operand size to 32-bit
292    db      6Dh         ; INSW/INSD
293    ret
294
295
296;--------------------------------------------------------------------
297; DualByteWriteForXtide     Dual port 8-bit XTIDE PIO write transfer
298; SingleByteWrite           Single port 8-bit PIO write transfer
299; WordWriteForXTIDEmod      8088/8086 compatible 16-bit IDE PIO read transfer
300; WordWrite                 Normal 16-bit IDE PIO write transfer
301; DWordWrite                VLB/PCI 32-bit IDE PIO write transfer
302;   Parameters:
303;       CX:     Block size in WORDs
304;       DX:     IDE Data port address
305;       ES:SI:  Normalized ptr to buffer containing data
306;   Returns:
307;       Nothing
308;   Corrupts registers:
309;       AX, CX
310;--------------------------------------------------------------------
311ALIGN JUMP_ALIGN
312DualByteWriteForXtide:
313    push    ds
314    push    bx
315    times 2 shr cx, 1   ; Loop unrolling
316    mov     bx, 8       ; Bit mask for toggling data low/high reg
317    push    es          ; Copy ES...
318    pop     ds          ; ...to DS
319ALIGN JUMP_ALIGN
320.OutswLoop:
321    XTIDE_OUTSW
322    XTIDE_OUTSW
323    XTIDE_OUTSW
324    XTIDE_OUTSW
325    loop    .OutswLoop
326    pop     bx
327    pop     ds
328    ret
329
330;----
331ALIGN JUMP_ALIGN
332SingleByteWrite:
333%ifdef USE_186  ; OUTS instruction available
334    shl     cx, 1       ; WORD count to BYTE count
335    eSEG    es          ; Source is ES segment
336    rep outsb
337%else           ; If 8088/8086
338    shr     cx, 1       ; WORD count to DWORD count
339    push    ds          ; Store DS
340    push    es          ; Copy ES...
341    pop     ds          ; ...to DS
342ALIGN JUMP_ALIGN
343.OutsdLoop:
344    lodsb               ; Load from [DS:SI] to AL
345    out     dx, al
346    lodsb
347    out     dx, al
348    lodsb
349    out     dx, al
350    lodsb
351    out     dx, al
352    loop    .OutsdLoop
353    pop     ds          ; Restore DS
354%endif
355    ret
356
357;---
358ALIGN JUMP_ALIGN
359WordWriteForXTIDEmod:
360    push    ds
361    times 2 shr cx, 1   ; Loop unrolling
362    push    es          ; Copy ES...
363    pop     ds          ; ...to DS
364ALIGN JUMP_ALIGN
365.WriteNextQword:
366    XTIDE_MOD_OUTSW
367    XTIDE_MOD_OUTSW
368    XTIDE_MOD_OUTSW
369    XTIDE_MOD_OUTSW
370    loop    .WriteNextQword
371    pop     ds
372    ret
373
374;----
375ALIGN JUMP_ALIGN
376WordWrite:
377    eSEG    es          ; Source is ES segment
378    rep
379    db      6Fh         ; OUTSW (we want this in XT build)
380    ret
381
382ALIGN JUMP_ALIGN
383DWordWrite:
384    shr     cx, 1       ; WORD count to DWORD count
385    eSEG    es          ; Source is ES segment
386    rep
387    db      66h         ; Override operand size to 32-bit
388    db      6Fh         ; OUTSW/OUTSD
389    ret
390
391
392
393; Lookup tables to get transfer function based on bus type
394ALIGN WORD_ALIGN
395g_rgfnPioRead:
396    dw      DualByteReadForXtide    ; DEVICE_8BIT_DUAL_PORT_XTIDE
397%ifdef USE_186
398    dw      WordReadForXTplusAndAT  ; DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
399%else
400    dw      WordReadForXTIDEmod
401%endif
402    dw      SingleByteRead          ; DEVICE_8BIT_SINGLE_PORT
403    dw      WordReadForXTplusAndAT  ; DEVICE_16BIT_ATA
404    dw      DWordRead               ; DEVICE_32BIT_ATA
405
406g_rgfnPioWrite:
407    dw      DualByteWriteForXtide   ; DEVICE_8BIT_DUAL_PORT_XTIDE
408    dw      WordWriteForXTIDEmod    ; DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
409    dw      SingleByteWrite         ; DEVICE_8BIT_SINGLE_PORT
410    dw      WordWrite               ; DEVICE_16BIT_ATA
411    dw      DWordWrite              ; DEVICE_32BIT_ATA
Note: See TracBrowser for help on using the repository browser.