| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : IDE Device transfer functions.
|
|---|
| 3 |
|
|---|
| 4 | ; Structure containing variables for PIO transfer functions.
|
|---|
| 5 | ; This struct must not be larger than IDEPACK without INTPACK.
|
|---|
| 6 | struc PIOVARS
|
|---|
| 7 | .wWordsInBlock resb 2 ; 0, Block size in WORDs
|
|---|
| 8 | .wWordsLeft resb 2 ; 2, WORDs left to transfer
|
|---|
| 9 | .wWordsDone resb 2 ; 4, Number of sectors xferred
|
|---|
| 10 | resb 1 ; 6,
|
|---|
| 11 | resb 1 ; 7, IDEPACK.bDeviceControl
|
|---|
| 12 | .wDataPort resb 2 ; 8, IDE Data Port
|
|---|
| 13 | .fnXfer resb 2 ; 10, Offset to transfer function
|
|---|
| 14 | endstruc
|
|---|
| 15 |
|
|---|
| 16 |
|
|---|
| 17 | ; Section containing code
|
|---|
| 18 | SECTION .text
|
|---|
| 19 |
|
|---|
| 20 | ;--------------------------------------------------------------------
|
|---|
| 21 | ; IdeTransfer_StartWithCommandInAL
|
|---|
| 22 | ; Parameters:
|
|---|
| 23 | ; AL: IDE command that was used to start the transfer
|
|---|
| 24 | ; (all PIO read and write commands including Identify Device)
|
|---|
| 25 | ; ES:SI: Ptr to normalized data buffer
|
|---|
| 26 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 27 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 28 | ; Returns:
|
|---|
| 29 | ; AH: INT 13h Error Code
|
|---|
| 30 | ; CX: Number of successfully transferred sectors
|
|---|
| 31 | ; CF: Cleared if success, Set if error
|
|---|
| 32 | ; Corrupts registers:
|
|---|
| 33 | ; AL, BX, DX, SI, ES
|
|---|
| 34 | ;--------------------------------------------------------------------
|
|---|
| 35 | ALIGN JUMP_ALIGN
|
|---|
| 36 | IdeTransfer_StartWithCommandInAL:
|
|---|
| 37 | mov ah, [bp+IDEPACK.bSectorCount]
|
|---|
| 38 |
|
|---|
| 39 | ; Are we reading or writing?
|
|---|
| 40 | test al, 16 ; Bit 4 is cleared on all the read commands but set on 3 of the 4 write commands
|
|---|
| 41 | jnz SHORT .PrepareToWriteDataFromESSI
|
|---|
| 42 | cmp al, COMMAND_WRITE_MULTIPLE
|
|---|
| 43 | je SHORT .PrepareToWriteDataFromESSI
|
|---|
| 44 |
|
|---|
| 45 | ; Prepare to read data to ESSI
|
|---|
| 46 | mov bx, g_rgfnPioRead
|
|---|
| 47 | call InitializePiovarsInSSBPwithSectorCountInAH
|
|---|
| 48 | xchg si, di
|
|---|
| 49 | jmp SHORT ReadFromDrive
|
|---|
| 50 |
|
|---|
| 51 | ALIGN JUMP_ALIGN
|
|---|
| 52 | .PrepareToWriteDataFromESSI:
|
|---|
| 53 | mov bx, g_rgfnPioWrite
|
|---|
| 54 | call InitializePiovarsInSSBPwithSectorCountInAH
|
|---|
| 55 | ; Fall to WriteToDrive
|
|---|
| 56 |
|
|---|
| 57 |
|
|---|
| 58 | ;--------------------------------------------------------------------
|
|---|
| 59 | ; WriteToDrive
|
|---|
| 60 | ; Parameters:
|
|---|
| 61 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 62 | ; ES:SI: Normalized ptr to buffer containing data
|
|---|
| 63 | ; SS:BP: Ptr to PIOVARS
|
|---|
| 64 | ; Returns:
|
|---|
| 65 | ; AH: BIOS Error code
|
|---|
| 66 | ; CX: Number of successfully transferred sectors
|
|---|
| 67 | ; CF: 0 if transfer succesfull
|
|---|
| 68 | ; 1 if any error
|
|---|
| 69 | ; Corrupts registers:
|
|---|
| 70 | ; AL, BX, DX, SI, ES
|
|---|
| 71 | ;--------------------------------------------------------------------
|
|---|
| 72 | WriteToDrive:
|
|---|
| 73 | ; Always poll when writing first block (IRQs are generated for following blocks)
|
|---|
| 74 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRQ)
|
|---|
| 75 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 76 | jc SHORT ReturnWithTransferErrorInAH
|
|---|
| 77 |
|
|---|
| 78 | ALIGN JUMP_ALIGN
|
|---|
| 79 | .WriteNextBlockToDrive:
|
|---|
| 80 | mov cx, [bp+PIOVARS.wWordsInBlock]
|
|---|
| 81 | mov dx, [bp+PIOVARS.wDataPort]
|
|---|
| 82 | cmp [bp+PIOVARS.wWordsLeft], cx
|
|---|
| 83 | jbe SHORT .WriteLastBlockToDrive
|
|---|
| 84 | call [bp+PIOVARS.fnXfer]
|
|---|
| 85 |
|
|---|
| 86 | ; Wait until ready for next block and check for errors
|
|---|
| 87 | call IdeWait_IRQorDRQ ; Wait until ready to transfer
|
|---|
| 88 | jc SHORT ReturnWithTransferErrorInAH
|
|---|
| 89 |
|
|---|
| 90 | ; Increment number of successfully written WORDs
|
|---|
| 91 | mov ax, [bp+PIOVARS.wWordsInBlock]
|
|---|
| 92 | sub [bp+PIOVARS.wWordsLeft], ax
|
|---|
| 93 | add [bp+PIOVARS.wWordsDone], ax
|
|---|
| 94 | jmp SHORT .WriteNextBlockToDrive
|
|---|
| 95 |
|
|---|
| 96 | ALIGN JUMP_ALIGN
|
|---|
| 97 | .WriteLastBlockToDrive:
|
|---|
| 98 | mov cx, [bp+PIOVARS.wWordsLeft]
|
|---|
| 99 | call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block
|
|---|
| 100 |
|
|---|
| 101 | ; Check for errors in last block
|
|---|
| 102 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRDY)
|
|---|
| 103 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 104 | jmp SHORT ReturnWithTransferErrorInAH
|
|---|
| 105 |
|
|---|
| 106 |
|
|---|
| 107 | ;--------------------------------------------------------------------
|
|---|
| 108 | ; ReadFromDrive
|
|---|
| 109 | ; Parameters:
|
|---|
| 110 | ; ES:DI: Normalized ptr to buffer to recieve data
|
|---|
| 111 | ; DS:SI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 112 | ; SS:BP: Ptr to PIOVARS
|
|---|
| 113 | ; Returns:
|
|---|
| 114 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 115 | ; AH: BIOS Error code
|
|---|
| 116 | ; CX: Number of successfully transferred sectors
|
|---|
| 117 | ; CF: 0 if transfer succesfull
|
|---|
| 118 | ; 1 if any error
|
|---|
| 119 | ; Corrupts registers:
|
|---|
| 120 | ; AL, BX, DX, SI, ES
|
|---|
| 121 | ;--------------------------------------------------------------------
|
|---|
| 122 | ALIGN JUMP_ALIGN
|
|---|
| 123 | ReadFromDrive:
|
|---|
| 124 | ; Wait until drive is ready to transfer
|
|---|
| 125 | xchg di, si ; DS:DI now points DPT
|
|---|
| 126 | call IdeWait_IRQorDRQ ; Wait until ready to transfer
|
|---|
| 127 | jc SHORT ReturnWithTransferErrorInAH
|
|---|
| 128 | xchg si, di ; ES:DI now points buffer
|
|---|
| 129 |
|
|---|
| 130 | ALIGN JUMP_ALIGN
|
|---|
| 131 | .ReadNextBlockFromDrive:
|
|---|
| 132 | mov cx, [bp+PIOVARS.wWordsInBlock]
|
|---|
| 133 | mov dx, [bp+PIOVARS.wDataPort]
|
|---|
| 134 | cmp [bp+PIOVARS.wWordsLeft], cx
|
|---|
| 135 | jbe SHORT .ReadLastBlockFromDrive
|
|---|
| 136 | call [bp+PIOVARS.fnXfer]
|
|---|
| 137 |
|
|---|
| 138 | ; Wait until ready for next block and check for errors
|
|---|
| 139 | xchg di, si ; DS:DI now points DPT
|
|---|
| 140 | call IdeWait_IRQorDRQ ; Wait until ready to transfer
|
|---|
| 141 | jc SHORT ReturnWithTransferErrorInAH
|
|---|
| 142 | xchg si, di ; ES:DI now points buffer
|
|---|
| 143 |
|
|---|
| 144 | ; Increment number of successfully read WORDs
|
|---|
| 145 | mov ax, [bp+PIOVARS.wWordsInBlock]
|
|---|
| 146 | sub [bp+PIOVARS.wWordsLeft], ax
|
|---|
| 147 | add [bp+PIOVARS.wWordsDone], ax
|
|---|
| 148 | jmp SHORT .ReadNextBlockFromDrive
|
|---|
| 149 |
|
|---|
| 150 | ALIGN JUMP_ALIGN
|
|---|
| 151 | .ReadLastBlockFromDrive:
|
|---|
| 152 | mov cx, [bp+PIOVARS.wWordsLeft]
|
|---|
| 153 | call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block
|
|---|
| 154 |
|
|---|
| 155 | ; Check for errors in last block
|
|---|
| 156 | mov di, si ; DS:DI now points DPT
|
|---|
| 157 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRDY)
|
|---|
| 158 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 159 |
|
|---|
| 160 | ; Return number of successfully read sectors
|
|---|
| 161 | ReturnWithTransferErrorInAH:
|
|---|
| 162 | mov cx, [bp+PIOVARS.wWordsDone]
|
|---|
| 163 | jc SHORT .ConvertTransferredWordsInCXtoSectors
|
|---|
| 164 | add cx, [bp+PIOVARS.wWordsLeft] ; Never sets CF
|
|---|
| 165 | .ConvertTransferredWordsInCXtoSectors:
|
|---|
| 166 | xchg cl, ch
|
|---|
| 167 | ret
|
|---|
| 168 |
|
|---|
| 169 |
|
|---|
| 170 | ;--------------------------------------------------------------------
|
|---|
| 171 | ; InitializePiovarsInSSBPwithSectorCountInAH
|
|---|
| 172 | ; Parameters:
|
|---|
| 173 | ; AH: Number of sectors to transfer (1...128)
|
|---|
| 174 | ; BX: Offset to transfer function lookup table
|
|---|
| 175 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 176 | ; SS:BP: Ptr to PIOVARS
|
|---|
| 177 | ; Returns:
|
|---|
| 178 | ; Nothing
|
|---|
| 179 | ; Corrupts registers:
|
|---|
| 180 | ; AX, BX, CX, DX
|
|---|
| 181 | ;--------------------------------------------------------------------
|
|---|
| 182 | ALIGN JUMP_ALIGN
|
|---|
| 183 | InitializePiovarsInSSBPwithSectorCountInAH:
|
|---|
| 184 | ; Store sizes
|
|---|
| 185 | xor al, al
|
|---|
| 186 | mov [bp+PIOVARS.wWordsLeft], ax
|
|---|
| 187 | cbw
|
|---|
| 188 | mov [bp+PIOVARS.wWordsDone], ax ; Zero
|
|---|
| 189 | mov ah, [di+DPT_ATA.bSetBlock]
|
|---|
| 190 | mov [bp+PIOVARS.wWordsInBlock], ax
|
|---|
| 191 |
|
|---|
| 192 | ; Get transfer function based on bus type
|
|---|
| 193 | xchg ax, bx ; Lookup table offset to AX
|
|---|
| 194 | eMOVZX bx, BYTE [di+DPT.bIdevarsOffset] ; CS:BX now points to IDEVARS
|
|---|
| 195 | mov dx, [cs:bx+IDEVARS.wPort] ; Load IDE Data port address
|
|---|
| 196 | mov bl, [cs:bx+IDEVARS.bDevice] ; Load device type to BX
|
|---|
| 197 | add bx, ax
|
|---|
| 198 | mov ax, [cs:bx] ; Load offset to transfer function
|
|---|
| 199 | mov [bp+PIOVARS.wDataPort], dx
|
|---|
| 200 | mov [bp+PIOVARS.fnXfer], ax
|
|---|
| 201 | ret
|
|---|
| 202 |
|
|---|
| 203 |
|
|---|
| 204 | ;--------------------------------------------------------------------
|
|---|
| 205 | ; DualByteReadForXtide Dual port 8-bit XTIDE PIO read transfer
|
|---|
| 206 | ; SingleByteRead Single port 8-bit PIO read transfer
|
|---|
| 207 | ; WordReadForXTIDEmod 8088/8086 compatible 16-bit IDE PIO read transfer
|
|---|
| 208 | ; WordReadForXTplusAndAT Normal 16-bit IDE PIO read transfer
|
|---|
| 209 | ; DWordRead VLB/PCI 32-bit IDE PIO read transfer
|
|---|
| 210 | ; Parameters:
|
|---|
| 211 | ; CX: Block size in WORDs
|
|---|
| 212 | ; DX: IDE Data port address
|
|---|
| 213 | ; ES:DI: Normalized ptr to buffer to recieve data
|
|---|
| 214 | ; Returns:
|
|---|
| 215 | ; Nothing
|
|---|
| 216 | ; Corrupts registers:
|
|---|
| 217 | ; AX, BX, CX
|
|---|
| 218 | ;--------------------------------------------------------------------
|
|---|
| 219 | ALIGN JUMP_ALIGN
|
|---|
| 220 | DualByteReadForXtide:
|
|---|
| 221 | eSHR_IM cx, 2 ; Loop unrolling
|
|---|
| 222 | mov bx, 8 ; Bit mask for toggling data low/high reg
|
|---|
| 223 | ALIGN JUMP_ALIGN
|
|---|
| 224 | .InswLoop:
|
|---|
| 225 | XTIDE_INSW
|
|---|
| 226 | XTIDE_INSW
|
|---|
| 227 | XTIDE_INSW
|
|---|
| 228 | XTIDE_INSW
|
|---|
| 229 | loop .InswLoop
|
|---|
| 230 | ret
|
|---|
| 231 |
|
|---|
| 232 | ;----
|
|---|
| 233 | ALIGN JUMP_ALIGN
|
|---|
| 234 | SingleByteRead:
|
|---|
| 235 | %ifdef USE_186 ; INS instruction available
|
|---|
| 236 | shl cx, 1 ; WORD count to BYTE count
|
|---|
| 237 | rep insb
|
|---|
| 238 | %else ; If 8088/8086
|
|---|
| 239 | shr cx, 1 ; WORD count to DWORD count
|
|---|
| 240 | ALIGN JUMP_ALIGN
|
|---|
| 241 | .InsdLoop:
|
|---|
| 242 | in al, dx
|
|---|
| 243 | stosb ; Store to [ES:DI]
|
|---|
| 244 | in al, dx
|
|---|
| 245 | stosb
|
|---|
| 246 | in al, dx
|
|---|
| 247 | stosb
|
|---|
| 248 | in al, dx
|
|---|
| 249 | stosb
|
|---|
| 250 | loop .InsdLoop
|
|---|
| 251 | %endif
|
|---|
| 252 | ret
|
|---|
| 253 |
|
|---|
| 254 | ;----
|
|---|
| 255 | %ifndef USE_186
|
|---|
| 256 | ALIGN JUMP_ALIGN
|
|---|
| 257 | WordReadForXTIDEmod:
|
|---|
| 258 | times 2 shr cx, 1 ; WORD count to QWORD count
|
|---|
| 259 | ALIGN JUMP_ALIGN
|
|---|
| 260 | .ReadNextQword:
|
|---|
| 261 | in ax, dx ; Read 1st WORD
|
|---|
| 262 | stosw ; Store 1st WORD to [ES:DI]
|
|---|
| 263 | in ax, dx
|
|---|
| 264 | stosw ; 2nd
|
|---|
| 265 | in ax, dx
|
|---|
| 266 | stosw ; 3rd
|
|---|
| 267 | in ax, dx
|
|---|
| 268 | stosw ; 4th
|
|---|
| 269 | loop .ReadNextQword
|
|---|
| 270 | ret
|
|---|
| 271 | %endif
|
|---|
| 272 |
|
|---|
| 273 | ;----
|
|---|
| 274 | ALIGN JUMP_ALIGN
|
|---|
| 275 | WordReadForXTplusAndAT:
|
|---|
| 276 | rep
|
|---|
| 277 | db 6Dh ; INSW (we want this in XT build)
|
|---|
| 278 | ret
|
|---|
| 279 |
|
|---|
| 280 | ;----
|
|---|
| 281 | ALIGN JUMP_ALIGN
|
|---|
| 282 | DWordRead:
|
|---|
| 283 | shr cx, 1 ; WORD count to DWORD count
|
|---|
| 284 | rep
|
|---|
| 285 | db 66h ; Override operand size to 32-bit
|
|---|
| 286 | db 6Dh ; INSW/INSD
|
|---|
| 287 | ret
|
|---|
| 288 |
|
|---|
| 289 |
|
|---|
| 290 | ;--------------------------------------------------------------------
|
|---|
| 291 | ; DualByteWriteForXtide Dual port 8-bit XTIDE PIO write transfer
|
|---|
| 292 | ; SingleByteWrite Single port 8-bit PIO write transfer
|
|---|
| 293 | ; WordWriteForXTIDEmod 8088/8086 compatible 16-bit IDE PIO read transfer
|
|---|
| 294 | ; WordWrite Normal 16-bit IDE PIO write transfer
|
|---|
| 295 | ; DWordWrite VLB/PCI 32-bit IDE PIO write transfer
|
|---|
| 296 | ; Parameters:
|
|---|
| 297 | ; CX: Block size in WORDs
|
|---|
| 298 | ; DX: IDE Data port address
|
|---|
| 299 | ; ES:SI: Normalized ptr to buffer containing data
|
|---|
| 300 | ; Returns:
|
|---|
| 301 | ; Nothing
|
|---|
| 302 | ; Corrupts registers:
|
|---|
| 303 | ; AX, CX
|
|---|
| 304 | ;--------------------------------------------------------------------
|
|---|
| 305 | ALIGN JUMP_ALIGN
|
|---|
| 306 | DualByteWriteForXtide:
|
|---|
| 307 | push ds
|
|---|
| 308 | push bx
|
|---|
| 309 | eSHR_IM cx, 2 ; Loop unrolling
|
|---|
| 310 | mov bx, 8 ; Bit mask for toggling data low/high reg
|
|---|
| 311 | push es ; Copy ES...
|
|---|
| 312 | pop ds ; ...to DS
|
|---|
| 313 | ALIGN JUMP_ALIGN
|
|---|
| 314 | .OutswLoop:
|
|---|
| 315 | XTIDE_OUTSW
|
|---|
| 316 | XTIDE_OUTSW
|
|---|
| 317 | XTIDE_OUTSW
|
|---|
| 318 | XTIDE_OUTSW
|
|---|
| 319 | loop .OutswLoop
|
|---|
| 320 | pop bx
|
|---|
| 321 | pop ds
|
|---|
| 322 | ret
|
|---|
| 323 |
|
|---|
| 324 | ;----
|
|---|
| 325 | ALIGN JUMP_ALIGN
|
|---|
| 326 | SingleByteWrite:
|
|---|
| 327 | %ifdef USE_186 ; OUTS instruction available
|
|---|
| 328 | shl cx, 1 ; WORD count to BYTE count
|
|---|
| 329 | es ; Source is ES segment
|
|---|
| 330 | rep outsb
|
|---|
| 331 | %else ; If 8088/8086
|
|---|
| 332 | shr cx, 1 ; WORD count to DWORD count
|
|---|
| 333 | push ds ; Store DS
|
|---|
| 334 | push es ; Copy ES...
|
|---|
| 335 | pop ds ; ...to DS
|
|---|
| 336 | ALIGN JUMP_ALIGN
|
|---|
| 337 | .OutsdLoop:
|
|---|
| 338 | lodsb ; Load from [DS:SI] to AL
|
|---|
| 339 | out dx, al
|
|---|
| 340 | lodsb
|
|---|
| 341 | out dx, al
|
|---|
| 342 | lodsb
|
|---|
| 343 | out dx, al
|
|---|
| 344 | lodsb
|
|---|
| 345 | out dx, al
|
|---|
| 346 | loop .OutsdLoop
|
|---|
| 347 | pop ds ; Restore DS
|
|---|
| 348 | %endif
|
|---|
| 349 | ret
|
|---|
| 350 |
|
|---|
| 351 | ;---
|
|---|
| 352 | ALIGN JUMP_ALIGN
|
|---|
| 353 | WordWriteForXTIDEmod:
|
|---|
| 354 | push ds
|
|---|
| 355 | eSHR_IM cx, 2 ; Loop unrolling
|
|---|
| 356 | push es ; Copy ES...
|
|---|
| 357 | pop ds ; ...to DS
|
|---|
| 358 | ALIGN JUMP_ALIGN
|
|---|
| 359 | .WriteNextQword:
|
|---|
| 360 | XTIDE_MOD_OUTSW
|
|---|
| 361 | XTIDE_MOD_OUTSW
|
|---|
| 362 | XTIDE_MOD_OUTSW
|
|---|
| 363 | XTIDE_MOD_OUTSW
|
|---|
| 364 | loop .WriteNextQword
|
|---|
| 365 | pop ds
|
|---|
| 366 | ret
|
|---|
| 367 |
|
|---|
| 368 | ;----
|
|---|
| 369 | ALIGN JUMP_ALIGN
|
|---|
| 370 | WordWrite:
|
|---|
| 371 | es ; Source is ES segment
|
|---|
| 372 | rep
|
|---|
| 373 | db 6Fh ; OUTSW (we want this in XT build)
|
|---|
| 374 | ret
|
|---|
| 375 |
|
|---|
| 376 | ALIGN JUMP_ALIGN
|
|---|
| 377 | DWordWrite:
|
|---|
| 378 | shr cx, 1 ; WORD count to DWORD count
|
|---|
| 379 | es ; Source is ES segment
|
|---|
| 380 | rep
|
|---|
| 381 | db 66h ; Override operand size to 32-bit
|
|---|
| 382 | db 6Fh ; OUTSW/OUTSD
|
|---|
| 383 | ret
|
|---|
| 384 |
|
|---|
| 385 |
|
|---|
| 386 |
|
|---|
| 387 | ; Lookup tables to get transfer function based on bus type
|
|---|
| 388 | ALIGN WORD_ALIGN
|
|---|
| 389 | g_rgfnPioRead:
|
|---|
| 390 | dw DualByteReadForXtide ; DEVICE_8BIT_DUAL_PORT_XTIDE
|
|---|
| 391 | %ifdef USE_186
|
|---|
| 392 | dw WordReadForXTplusAndAT ; DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
|
|---|
| 393 | %else
|
|---|
| 394 | dw WordReadForXTIDEmod
|
|---|
| 395 | %endif
|
|---|
| 396 | dw SingleByteRead ; DEVICE_8BIT_SINGLE_PORT
|
|---|
| 397 | dw WordReadForXTplusAndAT ; DEVICE_16BIT_ATA
|
|---|
| 398 | dw DWordRead ; DEVICE_32BIT_ATA
|
|---|
| 399 |
|
|---|
| 400 | g_rgfnPioWrite:
|
|---|
| 401 | dw DualByteWriteForXtide ; DEVICE_8BIT_DUAL_PORT_XTIDE
|
|---|
| 402 | dw WordWriteForXTIDEmod ; DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
|
|---|
| 403 | dw SingleByteWrite ; DEVICE_8BIT_SINGLE_PORT
|
|---|
| 404 | dw WordWrite ; DEVICE_16BIT_ATA
|
|---|
| 405 | dw DWordWrite ; DEVICE_32BIT_ATA
|
|---|
