[150] | 1 | ; Project name : XTIDE Universal BIOS |
---|
| 2 | ; Description : IDE Device transfer functions. |
---|
| 3 | |
---|
[376] | 4 | ; |
---|
| 5 | ; XTIDE Universal BIOS and Associated Tools |
---|
| 6 | ; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team. |
---|
| 7 | ; |
---|
| 8 | ; This program is free software; you can redistribute it and/or modify |
---|
| 9 | ; it under the terms of the GNU General Public License as published by |
---|
| 10 | ; the Free Software Foundation; either version 2 of the License, or |
---|
| 11 | ; (at your option) any later version. |
---|
| 12 | ; |
---|
| 13 | ; This program is distributed in the hope that it will be useful, |
---|
| 14 | ; but WITHOUT ANY WARRANTY; without even the implied warranty of |
---|
| 15 | ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
---|
| 16 | ; GNU General Public License for more details. |
---|
| 17 | ; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html |
---|
| 18 | ; |
---|
| 19 | |
---|
[150] | 20 | ; Structure containing variables for PIO transfer functions. |
---|
| 21 | ; This struct must not be larger than IDEPACK without INTPACK. |
---|
| 22 | struc PIOVARS |
---|
[363] | 23 | .wDataPort resb 2 ; 0, IDE Data Port |
---|
| 24 | .fnXfer resb 2 ; 2, Offset to transfer function |
---|
| 25 | .wSectorsInBlock resb 2 ; 4, Block size in sectors |
---|
| 26 | .bSectorsLeft resb 1 ; 6, Sectors left to transfer |
---|
[218] | 27 | resb 1 ; 7, IDEPACK.bDeviceControl |
---|
[363] | 28 | .bSectorsDone resb 1 ; 8, Number of sectors xferred |
---|
[150] | 29 | endstruc |
---|
| 30 | |
---|
| 31 | |
---|
| 32 | ; Section containing code |
---|
| 33 | SECTION .text |
---|
| 34 | |
---|
| 35 | ;-------------------------------------------------------------------- |
---|
| 36 | ; IdeTransfer_StartWithCommandInAL |
---|
| 37 | ; Parameters: |
---|
| 38 | ; AL: IDE command that was used to start the transfer |
---|
[171] | 39 | ; (all PIO read and write commands including Identify Device) |
---|
[218] | 40 | ; ES:SI: Ptr to normalized data buffer |
---|
[150] | 41 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
| 42 | ; SS:BP: Ptr to IDEPACK |
---|
| 43 | ; Returns: |
---|
| 44 | ; AH: INT 13h Error Code |
---|
[218] | 45 | ; CX: Number of successfully transferred sectors |
---|
[150] | 46 | ; CF: Cleared if success, Set if error |
---|
| 47 | ; Corrupts registers: |
---|
[218] | 48 | ; AL, BX, DX, SI, ES |
---|
[150] | 49 | ;-------------------------------------------------------------------- |
---|
| 50 | ALIGN JUMP_ALIGN |
---|
| 51 | IdeTransfer_StartWithCommandInAL: |
---|
[157] | 52 | ; Are we reading or writing? |
---|
[171] | 53 | test al, 16 ; Bit 4 is cleared on all the read commands but set on 3 of the 4 write commands |
---|
[242] | 54 | mov ah, [bp+IDEPACK.bSectorCount] |
---|
| 55 | jnz SHORT WriteToDrive |
---|
[171] | 56 | cmp al, COMMAND_WRITE_MULTIPLE |
---|
[242] | 57 | je SHORT WriteToDrive |
---|
| 58 | ; Fall to ReadFromDrive |
---|
[150] | 59 | |
---|
| 60 | ;-------------------------------------------------------------------- |
---|
[242] | 61 | ; ReadFromDrive |
---|
[150] | 62 | ; Parameters: |
---|
[242] | 63 | ; AH: Number of sectors to transfer (1...128) |
---|
| 64 | ; ES:SI: Normalized ptr to buffer to receive data |
---|
[150] | 65 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
| 66 | ; SS:BP: Ptr to PIOVARS |
---|
| 67 | ; Returns: |
---|
[242] | 68 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
[150] | 69 | ; AH: BIOS Error code |
---|
[218] | 70 | ; CX: Number of successfully transferred sectors |
---|
[294] | 71 | ; CF: 0 if transfer successful |
---|
[150] | 72 | ; 1 if any error |
---|
| 73 | ; Corrupts registers: |
---|
[218] | 74 | ; AL, BX, DX, SI, ES |
---|
[150] | 75 | ;-------------------------------------------------------------------- |
---|
[242] | 76 | ReadFromDrive: |
---|
| 77 | ; Prepare to read data to ESSI |
---|
| 78 | mov bx, g_rgfnPioRead |
---|
| 79 | call InitializePiovarsInSSBPwithSectorCountInAH |
---|
| 80 | |
---|
| 81 | ; Wait until drive is ready to transfer |
---|
| 82 | call IdeWait_IRQorDRQ ; Wait until ready to transfer |
---|
[218] | 83 | jc SHORT ReturnWithTransferErrorInAH |
---|
[242] | 84 | xchg si, di ; ES:DI now points buffer |
---|
[218] | 85 | |
---|
[363] | 86 | mov cx, [bp+PIOVARS.wSectorsInBlock] ; Max 128 |
---|
[242] | 87 | |
---|
[150] | 88 | ALIGN JUMP_ALIGN |
---|
[242] | 89 | .ReadNextBlockFromDrive: |
---|
[150] | 90 | mov dx, [bp+PIOVARS.wDataPort] |
---|
[363] | 91 | cmp [bp+PIOVARS.bSectorsLeft], cl |
---|
[242] | 92 | jbe SHORT .ReadLastBlockFromDrive |
---|
[218] | 93 | call [bp+PIOVARS.fnXfer] |
---|
[169] | 94 | |
---|
[218] | 95 | ; Wait until ready for next block and check for errors |
---|
[242] | 96 | xchg di, si ; DS:DI now points DPT |
---|
[218] | 97 | call IdeWait_IRQorDRQ ; Wait until ready to transfer |
---|
| 98 | jc SHORT ReturnWithTransferErrorInAH |
---|
[242] | 99 | xchg si, di ; ES:DI now points buffer |
---|
[169] | 100 | |
---|
[363] | 101 | ; Increment number of successfully read sectors |
---|
| 102 | mov cx, [bp+PIOVARS.wSectorsInBlock] |
---|
| 103 | sub [bp+PIOVARS.bSectorsLeft], cl |
---|
| 104 | add [bp+PIOVARS.bSectorsDone], cl |
---|
[242] | 105 | jmp SHORT .ReadNextBlockFromDrive |
---|
[150] | 106 | |
---|
| 107 | ALIGN JUMP_ALIGN |
---|
[242] | 108 | .ReadLastBlockFromDrive: |
---|
[363] | 109 | mov cl, [bp+PIOVARS.bSectorsLeft] ; CH is already zero |
---|
[150] | 110 | call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block |
---|
| 111 | |
---|
[242] | 112 | ; Check for errors in last block |
---|
| 113 | mov di, si ; DS:DI now points DPT |
---|
| 114 | CheckErrorsAfterTransferringLastBlock: |
---|
| 115 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRDY) |
---|
| 116 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH |
---|
[150] | 117 | |
---|
[242] | 118 | ; Return number of successfully read sectors |
---|
| 119 | ReturnWithTransferErrorInAH: |
---|
[370] | 120 | %ifdef USE_386 |
---|
| 121 | movzx cx, [bp+PIOVARS.bSectorsDone] |
---|
| 122 | %else |
---|
[363] | 123 | mov cl, [bp+PIOVARS.bSectorsDone] |
---|
| 124 | mov ch, 0 ; Preserve CF |
---|
[370] | 125 | %endif |
---|
[242] | 126 | ret |
---|
| 127 | |
---|
| 128 | |
---|
[150] | 129 | ;-------------------------------------------------------------------- |
---|
[242] | 130 | ; WriteToDrive |
---|
[150] | 131 | ; Parameters: |
---|
[242] | 132 | ; AH: Number of sectors to transfer (1...128) |
---|
| 133 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
| 134 | ; ES:SI: Normalized ptr to buffer containing data |
---|
[150] | 135 | ; SS:BP: Ptr to PIOVARS |
---|
| 136 | ; Returns: |
---|
| 137 | ; AH: BIOS Error code |
---|
[218] | 138 | ; CX: Number of successfully transferred sectors |
---|
[294] | 139 | ; CF: 0 if transfer successful |
---|
[150] | 140 | ; 1 if any error |
---|
| 141 | ; Corrupts registers: |
---|
[218] | 142 | ; AL, BX, DX, SI, ES |
---|
[150] | 143 | ;-------------------------------------------------------------------- |
---|
| 144 | ALIGN JUMP_ALIGN |
---|
[242] | 145 | WriteToDrive: |
---|
| 146 | ; Prepare to write data from ESSI |
---|
| 147 | mov bx, g_rgfnPioWrite |
---|
| 148 | call InitializePiovarsInSSBPwithSectorCountInAH |
---|
| 149 | |
---|
| 150 | ; Always poll when writing first block (IRQs are generated for following blocks) |
---|
| 151 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRQ) |
---|
| 152 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH |
---|
[218] | 153 | jc SHORT ReturnWithTransferErrorInAH |
---|
[150] | 154 | |
---|
[363] | 155 | mov cx, [bp+PIOVARS.wSectorsInBlock] ; Max 128 |
---|
[242] | 156 | |
---|
[218] | 157 | ALIGN JUMP_ALIGN |
---|
[242] | 158 | .WriteNextBlockToDrive: |
---|
[150] | 159 | mov dx, [bp+PIOVARS.wDataPort] |
---|
[363] | 160 | cmp [bp+PIOVARS.bSectorsLeft], cl |
---|
[242] | 161 | jbe SHORT .WriteLastBlockToDrive |
---|
[218] | 162 | call [bp+PIOVARS.fnXfer] |
---|
[169] | 163 | |
---|
[218] | 164 | ; Wait until ready for next block and check for errors |
---|
| 165 | call IdeWait_IRQorDRQ ; Wait until ready to transfer |
---|
| 166 | jc SHORT ReturnWithTransferErrorInAH |
---|
[150] | 167 | |
---|
[363] | 168 | ; Increment number of successfully written sectors |
---|
| 169 | mov cx, [bp+PIOVARS.wSectorsInBlock] |
---|
| 170 | sub [bp+PIOVARS.bSectorsLeft], cl |
---|
| 171 | add [bp+PIOVARS.bSectorsDone], cl |
---|
[242] | 172 | jmp SHORT .WriteNextBlockToDrive |
---|
[169] | 173 | |
---|
[150] | 174 | ALIGN JUMP_ALIGN |
---|
[242] | 175 | .WriteLastBlockToDrive: |
---|
[363] | 176 | mov cl, [bp+PIOVARS.bSectorsLeft] ; CH is already zero |
---|
[242] | 177 | %ifdef USE_186 |
---|
| 178 | push CheckErrorsAfterTransferringLastBlock |
---|
| 179 | jmp [bp+PIOVARS.fnXfer] ; Transfer possibly partial block |
---|
| 180 | %else |
---|
[150] | 181 | call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block |
---|
[242] | 182 | jmp SHORT CheckErrorsAfterTransferringLastBlock |
---|
| 183 | %endif |
---|
[218] | 184 | |
---|
[150] | 185 | |
---|
| 186 | ;-------------------------------------------------------------------- |
---|
[218] | 187 | ; InitializePiovarsInSSBPwithSectorCountInAH |
---|
[150] | 188 | ; Parameters: |
---|
[218] | 189 | ; AH: Number of sectors to transfer (1...128) |
---|
[150] | 190 | ; BX: Offset to transfer function lookup table |
---|
| 191 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
[169] | 192 | ; SS:BP: Ptr to PIOVARS |
---|
[167] | 193 | ; Returns: |
---|
[169] | 194 | ; Nothing |
---|
[150] | 195 | ; Corrupts registers: |
---|
[242] | 196 | ; AX, BX, DX |
---|
[150] | 197 | ;-------------------------------------------------------------------- |
---|
| 198 | ALIGN JUMP_ALIGN |
---|
[218] | 199 | InitializePiovarsInSSBPwithSectorCountInAH: |
---|
| 200 | ; Store sizes |
---|
[363] | 201 | mov [bp+PIOVARS.bSectorsLeft], ah |
---|
[370] | 202 | eMOVZX ax, [di+DPT_ATA.bBlockSize] |
---|
[363] | 203 | mov [bp+PIOVARS.wSectorsInBlock], ax |
---|
| 204 | mov [bp+PIOVARS.bSectorsDone], ah ; Zero |
---|
[150] | 205 | |
---|
| 206 | ; Get transfer function based on bus type |
---|
[158] | 207 | xchg ax, bx ; Lookup table offset to AX |
---|
[242] | 208 | mov bl, [di+DPT.bIdevarsOffset] ; CS:BX now points to IDEVARS |
---|
[150] | 209 | mov dx, [cs:bx+IDEVARS.wPort] ; Load IDE Data port address |
---|
[400] | 210 | mov bl, [di+DPT_ATA.bDevice] |
---|
[150] | 211 | add bx, ax |
---|
[363] | 212 | |
---|
[242] | 213 | mov [bp+PIOVARS.wDataPort], dx |
---|
[150] | 214 | mov ax, [cs:bx] ; Load offset to transfer function |
---|
| 215 | mov [bp+PIOVARS.fnXfer], ax |
---|
| 216 | ret |
---|
| 217 | |
---|
| 218 | |
---|
| 219 | ;-------------------------------------------------------------------- |
---|
[361] | 220 | ; ReadBlockFromXtideRev1 XTIDE rev 1 |
---|
| 221 | ; ReadBlockFromXtideRev2 XTIDE rev 2 or rev 1 with swapped A0 and A3 (chuck-mod) |
---|
| 222 | ; ReadBlockFrom16bitDataPort Normal 16-bit IDE |
---|
| 223 | ; ReadBlockFrom32bitDataPort VLB/PCI 32-bit IDE |
---|
[150] | 224 | ; Parameters: |
---|
[363] | 225 | ; CX: Block size in 512 byte sectors |
---|
[150] | 226 | ; DX: IDE Data port address |
---|
[242] | 227 | ; ES:DI: Normalized ptr to buffer to receive data |
---|
[150] | 228 | ; Returns: |
---|
| 229 | ; Nothing |
---|
| 230 | ; Corrupts registers: |
---|
| 231 | ; AX, BX, CX |
---|
| 232 | ;-------------------------------------------------------------------- |
---|
[400] | 233 | %ifdef MODULE_8BIT_IDE |
---|
| 234 | |
---|
[150] | 235 | ALIGN JUMP_ALIGN |
---|
[361] | 236 | ReadBlockFromXtideRev1: |
---|
[363] | 237 | UNROLL_SECTORS_IN_CX_TO_QWORDS |
---|
[370] | 238 | mov bl, 8 ; Bit mask for toggling data low/high reg |
---|
[150] | 239 | ALIGN JUMP_ALIGN |
---|
| 240 | .InswLoop: |
---|
[152] | 241 | XTIDE_INSW |
---|
| 242 | XTIDE_INSW |
---|
| 243 | XTIDE_INSW |
---|
| 244 | XTIDE_INSW |
---|
[150] | 245 | loop .InswLoop |
---|
| 246 | ret |
---|
| 247 | |
---|
[361] | 248 | ;-------------------------------------------------------------------- |
---|
| 249 | %ifndef USE_186 ; 8086/8088 compatible WORD read |
---|
[150] | 250 | ALIGN JUMP_ALIGN |
---|
[361] | 251 | ReadBlockFromXtideRev2: |
---|
[363] | 252 | UNROLL_SECTORS_IN_CX_TO_QWORDS |
---|
[152] | 253 | ALIGN JUMP_ALIGN |
---|
| 254 | .ReadNextQword: |
---|
| 255 | in ax, dx ; Read 1st WORD |
---|
| 256 | stosw ; Store 1st WORD to [ES:DI] |
---|
| 257 | in ax, dx |
---|
| 258 | stosw ; 2nd |
---|
| 259 | in ax, dx |
---|
| 260 | stosw ; 3rd |
---|
| 261 | in ax, dx |
---|
| 262 | stosw ; 4th |
---|
| 263 | loop .ReadNextQword |
---|
| 264 | ret |
---|
| 265 | %endif |
---|
[150] | 266 | |
---|
[400] | 267 | %endif ; MODULE_8BIT_IDE |
---|
| 268 | |
---|
[361] | 269 | ;-------------------------------------------------------------------- |
---|
[401] | 270 | %ifdef USE_186 |
---|
[152] | 271 | ALIGN JUMP_ALIGN |
---|
[361] | 272 | ReadBlockFrom16bitDataPort: |
---|
[363] | 273 | xchg cl, ch ; Sectors to WORDs |
---|
[152] | 274 | rep |
---|
| 275 | db 6Dh ; INSW (we want this in XT build) |
---|
| 276 | ret |
---|
[401] | 277 | %endif |
---|
[152] | 278 | |
---|
[361] | 279 | ;-------------------------------------------------------------------- |
---|
[401] | 280 | %ifdef USE_AT |
---|
[152] | 281 | ALIGN JUMP_ALIGN |
---|
[361] | 282 | ReadBlockFrom32bitDataPort: |
---|
[363] | 283 | db 0C1h ; SHL |
---|
| 284 | db 0E1h ; CX |
---|
| 285 | db 7 ; 7 (Sectors to DWORDs) |
---|
[152] | 286 | rep |
---|
| 287 | db 66h ; Override operand size to 32-bit |
---|
| 288 | db 6Dh ; INSW/INSD |
---|
| 289 | ret |
---|
[401] | 290 | %endif |
---|
[152] | 291 | |
---|
| 292 | |
---|
[150] | 293 | ;-------------------------------------------------------------------- |
---|
[361] | 294 | ; WriteBlockToXtideRev1 XTIDE rev 1 |
---|
| 295 | ; WriteBlockToXtideRev2 XTIDE rev 2 or rev 1 with swapped A0 and A3 (chuck-mod) |
---|
| 296 | ; WriteBlockToFastXtide Fast XTIDE (CPLD v2 project) |
---|
| 297 | ; WriteBlockTo16bitDataPort Normal 16-bit IDE |
---|
| 298 | ; WriteBlockTo32bitDataPort VLB/PCI 32-bit IDE |
---|
[150] | 299 | ; Parameters: |
---|
[363] | 300 | ; CX: Block size in 512-byte sectors |
---|
[150] | 301 | ; DX: IDE Data port address |
---|
| 302 | ; ES:SI: Normalized ptr to buffer containing data |
---|
| 303 | ; Returns: |
---|
| 304 | ; Nothing |
---|
| 305 | ; Corrupts registers: |
---|
| 306 | ; AX, CX |
---|
| 307 | ;-------------------------------------------------------------------- |
---|
[400] | 308 | %ifdef MODULE_8BIT_IDE |
---|
| 309 | |
---|
[150] | 310 | ALIGN JUMP_ALIGN |
---|
[361] | 311 | WriteBlockToXtideRev1: |
---|
[150] | 312 | push ds |
---|
| 313 | push bx |
---|
[363] | 314 | UNROLL_SECTORS_IN_CX_TO_QWORDS |
---|
[370] | 315 | mov bl, 8 ; Bit mask for toggling data low/high reg |
---|
[152] | 316 | push es ; Copy ES... |
---|
| 317 | pop ds ; ...to DS |
---|
[150] | 318 | ALIGN JUMP_ALIGN |
---|
| 319 | .OutswLoop: |
---|
[152] | 320 | XTIDE_OUTSW |
---|
| 321 | XTIDE_OUTSW |
---|
| 322 | XTIDE_OUTSW |
---|
| 323 | XTIDE_OUTSW |
---|
[150] | 324 | loop .OutswLoop |
---|
| 325 | pop bx |
---|
| 326 | pop ds |
---|
| 327 | ret |
---|
| 328 | |
---|
[361] | 329 | ;-------------------------------------------------------------------- |
---|
[150] | 330 | ALIGN JUMP_ALIGN |
---|
[361] | 331 | WriteBlockToXtideRev2: |
---|
[363] | 332 | UNROLL_SECTORS_IN_CX_TO_QWORDS |
---|
[152] | 333 | push ds |
---|
| 334 | push es ; Copy ES... |
---|
| 335 | pop ds ; ...to DS |
---|
| 336 | ALIGN JUMP_ALIGN |
---|
| 337 | .WriteNextQword: |
---|
| 338 | XTIDE_MOD_OUTSW |
---|
| 339 | XTIDE_MOD_OUTSW |
---|
| 340 | XTIDE_MOD_OUTSW |
---|
| 341 | XTIDE_MOD_OUTSW |
---|
| 342 | loop .WriteNextQword |
---|
| 343 | pop ds |
---|
| 344 | ret |
---|
[150] | 345 | |
---|
[361] | 346 | ;-------------------------------------------------------------------- |
---|
| 347 | %ifndef USE_186 ; 8086/8088 compatible WORD write |
---|
[152] | 348 | ALIGN JUMP_ALIGN |
---|
[361] | 349 | WriteBlockToFastXtide: |
---|
[363] | 350 | UNROLL_SECTORS_IN_CX_TO_QWORDS |
---|
[361] | 351 | push ds |
---|
| 352 | push es |
---|
| 353 | pop ds |
---|
| 354 | ALIGN JUMP_ALIGN |
---|
| 355 | .ReadNextQword: |
---|
| 356 | lodsw ; Load 1st WORD from [DS:SI] |
---|
| 357 | out dx, ax ; Write 1st WORD |
---|
| 358 | lodsw |
---|
| 359 | out dx, ax ; 2nd |
---|
| 360 | lodsw |
---|
| 361 | out dx, ax ; 3rd |
---|
| 362 | lodsw |
---|
| 363 | out dx, ax ; 4th |
---|
| 364 | loop .ReadNextQword |
---|
| 365 | pop ds |
---|
| 366 | ret |
---|
| 367 | %endif |
---|
| 368 | |
---|
[400] | 369 | %endif ; MODULE_8BIT_IDE |
---|
| 370 | |
---|
[361] | 371 | ;-------------------------------------------------------------------- |
---|
[401] | 372 | %ifdef USE_186 |
---|
[361] | 373 | ALIGN JUMP_ALIGN |
---|
| 374 | WriteBlockTo16bitDataPort: |
---|
[363] | 375 | xchg cl, ch ; Sectors to WORDs |
---|
[223] | 376 | es ; Source is ES segment |
---|
[152] | 377 | rep |
---|
[155] | 378 | db 6Fh ; OUTSW (we want this in XT build) |
---|
[152] | 379 | ret |
---|
[401] | 380 | %endif |
---|
[152] | 381 | |
---|
[361] | 382 | ;-------------------------------------------------------------------- |
---|
[401] | 383 | %ifdef USE_AT |
---|
[152] | 384 | ALIGN JUMP_ALIGN |
---|
[361] | 385 | WriteBlockTo32bitDataPort: |
---|
[363] | 386 | db 0C1h ; SHL |
---|
| 387 | db 0E1h ; CX |
---|
| 388 | db 7 ; 7 (Sectors to DWORDs) |
---|
[223] | 389 | es ; Source is ES segment |
---|
[152] | 390 | rep |
---|
| 391 | db 66h ; Override operand size to 32-bit |
---|
| 392 | db 6Fh ; OUTSW/OUTSD |
---|
| 393 | ret |
---|
[401] | 394 | %endif |
---|
[152] | 395 | |
---|
| 396 | |
---|
[361] | 397 | |
---|
[150] | 398 | ; Lookup tables to get transfer function based on bus type |
---|
| 399 | ALIGN WORD_ALIGN |
---|
| 400 | g_rgfnPioRead: |
---|
[400] | 401 | %ifdef MODULE_8BIT_IDE |
---|
[401] | 402 | dw 0 ; 0, DEVICE_8BIT_JRIDE_ISA |
---|
[400] | 403 | %ifdef USE_186 |
---|
[401] | 404 | dw ReadBlockFrom16bitDataPort ; 1, DEVICE_FAST_XTIDE |
---|
| 405 | dw ReadBlockFrom16bitDataPort ; 2, DEVICE_8BIT_XTIDE_REV2 |
---|
[400] | 406 | %else |
---|
[401] | 407 | dw ReadBlockFromXtideRev2 ; 1, DEVICE_FAST_XTIDE |
---|
| 408 | dw ReadBlockFromXtideRev2 ; 2, DEVICE_8BIT_XTIDE_REV2 |
---|
[400] | 409 | %endif |
---|
[401] | 410 | dw ReadBlockFromXtideRev1 ; 3, DEVICE_XTIDE_REV1 |
---|
[400] | 411 | |
---|
[152] | 412 | %else |
---|
[400] | 413 | times COUNT_OF_8BIT_IDE_DEVICES dw 0 |
---|
[152] | 414 | %endif |
---|
[401] | 415 | %ifdef USE_AT |
---|
| 416 | dw ReadBlockFrom16bitDataPort ; 4, DEVICE_16BIT_ATA |
---|
| 417 | dw ReadBlockFrom32bitDataPort ; 5, DEVICE_32BIT_ATA |
---|
| 418 | %endif |
---|
[152] | 419 | |
---|
[400] | 420 | |
---|
[150] | 421 | g_rgfnPioWrite: |
---|
[400] | 422 | %ifdef MODULE_8BIT_IDE |
---|
[401] | 423 | dw 0 ; 0, DEVICE_8BIT_JRIDE_ISA |
---|
[400] | 424 | %ifdef USE_186 |
---|
[401] | 425 | dw WriteBlockTo16bitDataPort ; 1, DEVICE_FAST_XTIDE |
---|
[400] | 426 | %else |
---|
[401] | 427 | dw WriteBlockToFastXtide ; 1, DEVICE_FAST_XTIDE |
---|
[400] | 428 | %endif |
---|
[401] | 429 | dw WriteBlockToXtideRev2 ; 2, DEVICE_XTIDE_REV2 |
---|
| 430 | dw WriteBlockToXtideRev1 ; 3, DEVICE_XTIDE_REV1 |
---|
[400] | 431 | |
---|
[361] | 432 | %else |
---|
[400] | 433 | times COUNT_OF_8BIT_IDE_DEVICES dw 0 |
---|
[361] | 434 | %endif |
---|
[401] | 435 | %ifdef USE_AT |
---|
| 436 | dw WriteBlockTo16bitDataPort ; 4, DEVICE_16BIT_ATA |
---|
| 437 | dw WriteBlockTo32bitDataPort ; 5, DEVICE_32BIT_ATA |
---|
| 438 | %endif |
---|