| [150] | 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : IDE Device transfer functions.
|
|---|
| 3 |
|
|---|
| 4 | ; Structure containing variables for PIO transfer functions.
|
|---|
| 5 | ; This struct must not be larger than IDEPACK without INTPACK.
|
|---|
| 6 | struc PIOVARS
|
|---|
| 7 | .wBlocksLeft resb 2
|
|---|
| 8 | .wBlockSize resb 2 ; Block size in WORDs (256...32768)
|
|---|
| 9 | .wDataPort resb 2
|
|---|
| 10 | .bSectorsInLastBlock: resb 1
|
|---|
| 11 | resb 1 ; Offset 7 = IDEPACK.bDeviceControl
|
|---|
| 12 | .fnXfer resb 2 ; Offset to transfer function
|
|---|
| 13 | endstruc
|
|---|
| 14 |
|
|---|
| 15 |
|
|---|
| 16 | ; Section containing code
|
|---|
| 17 | SECTION .text
|
|---|
| 18 |
|
|---|
| 19 | ;--------------------------------------------------------------------
|
|---|
| 20 | ; IdeTransfer_StartWithCommandInAL
|
|---|
| 21 | ; Parameters:
|
|---|
| 22 | ; AL: IDE command that was used to start the transfer
|
|---|
| 23 | ; ES:SI: Ptr to destination buffer or source data
|
|---|
| 24 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 25 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 26 | ; Returns:
|
|---|
| 27 | ; AH: INT 13h Error Code
|
|---|
| 28 | ; CF: Cleared if success, Set if error
|
|---|
| 29 | ; Corrupts registers:
|
|---|
| 30 | ; AL, BX, CX, DX, SI, ES
|
|---|
| 31 | ;--------------------------------------------------------------------
|
|---|
| 32 | ALIGN JUMP_ALIGN
|
|---|
| 33 | IdeTransfer_StartWithCommandInAL:
|
|---|
| 34 | mov ah, [bp+IDEPACK.bSectorCountHighExt]
|
|---|
| 35 |
|
|---|
| 36 | ; Are we reading or writing
|
|---|
| 37 | cmp al, COMMAND_WRITE_MULTIPLE
|
|---|
| 38 | je SHORT .PrepareToWriteDataFromESSI
|
|---|
| 39 | cmp al, COMMAND_WRITE_MULTIPLE_EXT
|
|---|
| 40 | je SHORT .PrepareToWriteDataFromESSI
|
|---|
| 41 | cmp al, COMMAND_WRITE_SECTORS
|
|---|
| 42 | je SHORT .PrepareToWriteDataFromESSI
|
|---|
| 43 | cmp al, COMMAND_WRITE_SECTORS_EXT
|
|---|
| 44 | je SHORT .PrepareToWriteDataFromESSI
|
|---|
| 45 |
|
|---|
| 46 | ; Prepare to read data to ESSI
|
|---|
| 47 | mov bx, g_rgfnPioRead
|
|---|
| 48 | mov al, [bp+IDEPACK.bSectorCount]
|
|---|
| 49 | call InitializePiovarsInSSBPwithSectorCountInAX
|
|---|
| 50 | xchg si, di
|
|---|
| 51 | call Registers_NormalizeESDI
|
|---|
| 52 | jmp SHORT ReadFromDrive
|
|---|
| 53 |
|
|---|
| 54 | ALIGN JUMP_ALIGN
|
|---|
| 55 | .PrepareToWriteDataFromESSI:
|
|---|
| 56 | mov bx, g_rgfnPioWrite
|
|---|
| 57 | mov al, [bp+IDEPACK.bSectorCount]
|
|---|
| 58 | call InitializePiovarsInSSBPwithSectorCountInAX
|
|---|
| 59 | call Registers_NormalizeESSI
|
|---|
| 60 | ; Fall to WriteToDrive
|
|---|
| 61 |
|
|---|
| 62 |
|
|---|
| 63 | ;--------------------------------------------------------------------
|
|---|
| 64 | ; WriteToDrive
|
|---|
| 65 | ; Parameters:
|
|---|
| 66 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 67 | ; ES:SI: Normalized ptr to buffer containing data
|
|---|
| 68 | ; SS:BP: Ptr to PIOVARS
|
|---|
| 69 | ; Returns:
|
|---|
| 70 | ; AH: BIOS Error code
|
|---|
| 71 | ; CF: 0 if transfer succesfull
|
|---|
| 72 | ; 1 if any error
|
|---|
| 73 | ; Corrupts registers:
|
|---|
| 74 | ; AL, BX, CX, DX, SI, ES
|
|---|
| 75 | ;--------------------------------------------------------------------
|
|---|
| 76 | WriteToDrive:
|
|---|
| 77 | ; Always poll when writing first block (IRQs are generated for following blocks)
|
|---|
| 78 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRQ)
|
|---|
| 79 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 80 | jc SHORT .ReturnWithTransferErrorInAH
|
|---|
| 81 | ALIGN JUMP_ALIGN
|
|---|
| 82 | .WriteNextBlock:
|
|---|
| 83 | mov dx, [bp+PIOVARS.wDataPort]
|
|---|
| 84 | dec WORD [bp+PIOVARS.wBlocksLeft] ; Transferring last (possibly partial) block?
|
|---|
| 85 | jz SHORT .XferLastBlock ; If so, jump to transfer
|
|---|
| 86 | mov cx, [bp+PIOVARS.wBlockSize] ; Load block size in WORDs
|
|---|
| 87 | call [bp+PIOVARS.fnXfer] ; Transfer full block
|
|---|
| 88 |
|
|---|
| 89 | ; Normalize pointer when necessary
|
|---|
| 90 | mov ax, si
|
|---|
| 91 | shr ax, 1 ; WORD offset
|
|---|
| 92 | add ax, [bp+PIOVARS.wBlockSize]
|
|---|
| 93 | jns SHORT .WaitUntilReadyToTransferNextBlock
|
|---|
| 94 | call Registers_NormalizeESSI
|
|---|
| 95 |
|
|---|
| 96 | ALIGN JUMP_ALIGN
|
|---|
| 97 | .WaitUntilReadyToTransferNextBlock:
|
|---|
| 98 | %ifdef USE_186
|
|---|
| 99 | push .WriteNextBlock
|
|---|
| 100 | jmp IdeWait_IRQorDRQ
|
|---|
| 101 | %else
|
|---|
| 102 | call IdeWait_IRQorDRQ
|
|---|
| 103 | jnc SHORT .WriteNextBlock
|
|---|
| 104 | %endif
|
|---|
| 105 | .ReturnWithTransferErrorInAH:
|
|---|
| 106 | ret
|
|---|
| 107 |
|
|---|
| 108 | ALIGN JUMP_ALIGN
|
|---|
| 109 | .XferLastBlock:
|
|---|
| 110 | xor cx, cx
|
|---|
| 111 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRDY)
|
|---|
| 112 | mov ch, [bp+PIOVARS.bSectorsInLastBlock]; CX = Partial block size in WORDs
|
|---|
| 113 | %ifdef USE_186
|
|---|
| 114 | push IdeWait_IRQorStatusFlagInBLwithTimeoutInBH
|
|---|
| 115 | jmp [bp+PIOVARS.fnXfer]
|
|---|
| 116 | %else
|
|---|
| 117 | call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block
|
|---|
| 118 | jmp IdeWait_IRQorStatusFlagInBLwithTimeoutInBH ; Check for errors
|
|---|
| 119 | %endif
|
|---|
| 120 |
|
|---|
| 121 |
|
|---|
| 122 | ;--------------------------------------------------------------------
|
|---|
| 123 | ; ReadFromDrive
|
|---|
| 124 | ; Parameters:
|
|---|
| 125 | ; ES:DI: Normalized ptr to buffer to recieve data
|
|---|
| 126 | ; DS:SI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 127 | ; SS:BP: Ptr to PIOVARS
|
|---|
| 128 | ; Returns:
|
|---|
| 129 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 130 | ; AH: BIOS Error code
|
|---|
| 131 | ; CF: 0 if transfer succesfull
|
|---|
| 132 | ; 1 if any error
|
|---|
| 133 | ; Corrupts registers:
|
|---|
| 134 | ; AL, BX, CX, DX, SI, ES
|
|---|
| 135 | ;--------------------------------------------------------------------
|
|---|
| 136 | ALIGN JUMP_ALIGN
|
|---|
| 137 | ReadFromDrive:
|
|---|
| 138 | ; Wait until drive is ready to transfer
|
|---|
| 139 | xchg di, si ; DS:DI now points DPT
|
|---|
| 140 | call IdeWait_IRQorDRQ ; Wait until ready to transfer
|
|---|
| 141 | jc SHORT WriteToDrive.ReturnWithTransferErrorInAH
|
|---|
| 142 | xchg si, di ; ES:DI now points buffer
|
|---|
| 143 |
|
|---|
| 144 | ; Transfer full or last (possible partial) block
|
|---|
| 145 | mov dx, [bp+PIOVARS.wDataPort]
|
|---|
| 146 | dec WORD [bp+PIOVARS.wBlocksLeft]
|
|---|
| 147 | jz SHORT .XferLastBlock
|
|---|
| 148 | mov cx, [bp+PIOVARS.wBlockSize] ; Load block size in WORDs
|
|---|
| 149 | call [bp+PIOVARS.fnXfer] ; Transfer full block
|
|---|
| 150 |
|
|---|
| 151 | ; Normalize pointer when necessary
|
|---|
| 152 | mov ax, di
|
|---|
| 153 | shr ax, 1 ; WORD offset
|
|---|
| 154 | add ax, [bp+PIOVARS.wBlockSize]
|
|---|
| 155 | jns SHORT ReadFromDrive
|
|---|
| 156 | call Registers_NormalizeESDI
|
|---|
| 157 | jmp SHORT ReadFromDrive ; Loop while blocks left
|
|---|
| 158 |
|
|---|
| 159 | ALIGN JUMP_ALIGN
|
|---|
| 160 | .XferLastBlock:
|
|---|
| 161 | xor cx, cx
|
|---|
| 162 | mov ch, [bp+PIOVARS.bSectorsInLastBlock]; CX = Partial block size in WORDs
|
|---|
| 163 | call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block
|
|---|
| 164 | mov di, si ; DS:DI now points DPT
|
|---|
| 165 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRDY)
|
|---|
| 166 | jmp IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 167 |
|
|---|
| 168 |
|
|---|
| 169 | ;--------------------------------------------------------------------
|
|---|
| 170 | ; InitializePiovarsInSSBPwithSectorCountInAX
|
|---|
| 171 | ; Parameters:
|
|---|
| 172 | ; AX: Number of sectors to transfer (0=65536)
|
|---|
| 173 | ; BX: Offset to transfer function lookup table
|
|---|
| 174 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 175 | ; SS:BP: Ptr to PIOVARS
|
|---|
| 176 | ; Returns:
|
|---|
| 177 | ; Nothing
|
|---|
| 178 | ; Corrupts registers:
|
|---|
| 179 | ; AX, BX, CX, DX
|
|---|
| 180 | ;--------------------------------------------------------------------
|
|---|
| 181 | ALIGN JUMP_ALIGN
|
|---|
| 182 | InitializePiovarsInSSBPwithSectorCountInAX:
|
|---|
| 183 | ; Store number of blocks to transfer
|
|---|
| 184 | eMOVZX cx, BYTE [di+DPT_ATA.bSetBlock] ; Block size in sectors
|
|---|
| 185 | xor dx, dx
|
|---|
| 186 | test ax, ax
|
|---|
| 187 | eCMOVZ dl, 1 ; DX:AX = Sectors to transfer (1...65536)
|
|---|
| 188 | div cx ; AX = Full blocks to transfer
|
|---|
| 189 | test dx, dx
|
|---|
| 190 | mov dh, cl ; DH = Full block size if no partial blocks to transfer
|
|---|
| 191 | jz SHORT .NoPartialBlocksToTransfer
|
|---|
| 192 | inc ax ; Partial block
|
|---|
| 193 | mov dh, dl ; DH = Size of partial block in sectors
|
|---|
| 194 | .NoPartialBlocksToTransfer:
|
|---|
| 195 | mov [bp+PIOVARS.wBlocksLeft], ax
|
|---|
| 196 | mov [bp+PIOVARS.bSectorsInLastBlock], dh
|
|---|
| 197 |
|
|---|
| 198 | ; Store block size in WORDs
|
|---|
| 199 | xchg ch, cl ; CX = Block size in WORDs
|
|---|
| 200 | mov [bp+PIOVARS.wBlockSize], cx
|
|---|
| 201 |
|
|---|
| 202 | ; Get transfer function based on bus type
|
|---|
| 203 | xchg ax, bx
|
|---|
| 204 | eMOVZX bx, BYTE [di+DPT.bIdevarsOffset] ; CS:BX now points to IDEVARS
|
|---|
| 205 | mov dx, [cs:bx+IDEVARS.wPort] ; Load IDE Data port address
|
|---|
| 206 | mov bl, [cs:bx+IDEVARS.bDevice] ; Load device type to BX
|
|---|
| 207 | add bx, ax
|
|---|
| 208 | mov ax, [cs:bx] ; Load offset to transfer function
|
|---|
| 209 | mov [bp+PIOVARS.wDataPort], dx
|
|---|
| 210 | mov [bp+PIOVARS.fnXfer], ax
|
|---|
| 211 | ret
|
|---|
| 212 |
|
|---|
| 213 |
|
|---|
| 214 | ;--------------------------------------------------------------------
|
|---|
| [152] | 215 | ; DualByteReadForXtide Dual port 8-bit XTIDE PIO read transfer
|
|---|
| 216 | ; SingleByteRead Single port 8-bit PIO read transfer
|
|---|
| 217 | ; WordReadForXTIDEmod 8088/8086 compatible 16-bit IDE PIO read transfer
|
|---|
| 218 | ; WordReadForXTplusAndAT Normal 16-bit IDE PIO read transfer
|
|---|
| 219 | ; DWordRead VLB/PCI 32-bit IDE PIO read transfer
|
|---|
| [150] | 220 | ; Parameters:
|
|---|
| 221 | ; CX: Block size in WORDs
|
|---|
| 222 | ; DX: IDE Data port address
|
|---|
| 223 | ; ES:DI: Normalized ptr to buffer to recieve data
|
|---|
| 224 | ; Returns:
|
|---|
| 225 | ; Nothing
|
|---|
| 226 | ; Corrupts registers:
|
|---|
| 227 | ; AX, BX, CX
|
|---|
| 228 | ;--------------------------------------------------------------------
|
|---|
| 229 | ALIGN JUMP_ALIGN
|
|---|
| [152] | 230 | DualByteReadForXtide:
|
|---|
| 231 | times 2 shr cx, 1 ; Loop unrolling
|
|---|
| 232 | mov bx, 8 ; Bit mask for toggling data low/high reg
|
|---|
| [150] | 233 | ALIGN JUMP_ALIGN
|
|---|
| 234 | .InswLoop:
|
|---|
| [152] | 235 | XTIDE_INSW
|
|---|
| 236 | XTIDE_INSW
|
|---|
| 237 | XTIDE_INSW
|
|---|
| 238 | XTIDE_INSW
|
|---|
| [150] | 239 | loop .InswLoop
|
|---|
| 240 | ret
|
|---|
| 241 |
|
|---|
| [152] | 242 | ;----
|
|---|
| [150] | 243 | ALIGN JUMP_ALIGN
|
|---|
| 244 | SingleByteRead:
|
|---|
| 245 | %ifdef USE_186 ; INS instruction available
|
|---|
| [152] | 246 | shl cx, 1 ; WORD count to BYTE count
|
|---|
| [150] | 247 | rep insb
|
|---|
| 248 | %else ; If 8088/8086
|
|---|
| [152] | 249 | shr cx, 1 ; WORD count to DWORD count
|
|---|
| [150] | 250 | ALIGN JUMP_ALIGN
|
|---|
| 251 | .InsdLoop:
|
|---|
| 252 | in al, dx
|
|---|
| [152] | 253 | stosb ; Store to [ES:DI]
|
|---|
| [150] | 254 | in al, dx
|
|---|
| 255 | stosb
|
|---|
| 256 | in al, dx
|
|---|
| 257 | stosb
|
|---|
| 258 | in al, dx
|
|---|
| 259 | stosb
|
|---|
| 260 | loop .InsdLoop
|
|---|
| 261 | %endif
|
|---|
| 262 | ret
|
|---|
| 263 |
|
|---|
| [152] | 264 | ;----
|
|---|
| 265 | %ifndef USE_186
|
|---|
| 266 | ALIGN JUMP_ALIGN
|
|---|
| 267 | WordReadForXTIDEmod:
|
|---|
| 268 | times 2 shr cx, 1 ; WORD count to QWORD count
|
|---|
| 269 | ALIGN JUMP_ALIGN
|
|---|
| 270 | .ReadNextQword:
|
|---|
| 271 | in ax, dx ; Read 1st WORD
|
|---|
| 272 | stosw ; Store 1st WORD to [ES:DI]
|
|---|
| 273 | in ax, dx
|
|---|
| 274 | stosw ; 2nd
|
|---|
| 275 | in ax, dx
|
|---|
| 276 | stosw ; 3rd
|
|---|
| 277 | in ax, dx
|
|---|
| 278 | stosw ; 4th
|
|---|
| 279 | loop .ReadNextQword
|
|---|
| 280 | ret
|
|---|
| 281 | %endif
|
|---|
| [150] | 282 |
|
|---|
| [152] | 283 | ;----
|
|---|
| 284 | ALIGN JUMP_ALIGN
|
|---|
| 285 | WordReadForXTplusAndAT:
|
|---|
| 286 | rep
|
|---|
| 287 | db 6Dh ; INSW (we want this in XT build)
|
|---|
| 288 | ret
|
|---|
| 289 |
|
|---|
| 290 | ;----
|
|---|
| 291 | ALIGN JUMP_ALIGN
|
|---|
| 292 | DWordRead:
|
|---|
| 293 | shr cx, 1 ; WORD count to DWORD count
|
|---|
| 294 | rep
|
|---|
| 295 | db 66h ; Override operand size to 32-bit
|
|---|
| 296 | db 6Dh ; INSW/INSD
|
|---|
| 297 | ret
|
|---|
| 298 |
|
|---|
| 299 |
|
|---|
| [150] | 300 | ;--------------------------------------------------------------------
|
|---|
| [152] | 301 | ; DualByteWriteForXtide Dual port 8-bit XTIDE PIO write transfer
|
|---|
| 302 | ; SingleByteWrite Single port 8-bit PIO write transfer
|
|---|
| 303 | ; WordWriteForXTIDEmod 8088/8086 compatible 16-bit IDE PIO read transfer
|
|---|
| 304 | ; WordWrite Normal 16-bit IDE PIO write transfer
|
|---|
| 305 | ; DWordWrite VLB/PCI 32-bit IDE PIO write transfer
|
|---|
| [150] | 306 | ; Parameters:
|
|---|
| 307 | ; CX: Block size in WORDs
|
|---|
| 308 | ; DX: IDE Data port address
|
|---|
| 309 | ; ES:SI: Normalized ptr to buffer containing data
|
|---|
| 310 | ; Returns:
|
|---|
| 311 | ; Nothing
|
|---|
| 312 | ; Corrupts registers:
|
|---|
| 313 | ; AX, CX
|
|---|
| 314 | ;--------------------------------------------------------------------
|
|---|
| 315 | ALIGN JUMP_ALIGN
|
|---|
| [152] | 316 | DualByteWriteForXtide:
|
|---|
| [150] | 317 | push ds
|
|---|
| 318 | push bx
|
|---|
| [152] | 319 | times 2 shr cx, 1 ; Loop unrolling
|
|---|
| 320 | mov bx, 8 ; Bit mask for toggling data low/high reg
|
|---|
| 321 | push es ; Copy ES...
|
|---|
| 322 | pop ds ; ...to DS
|
|---|
| [150] | 323 | ALIGN JUMP_ALIGN
|
|---|
| 324 | .OutswLoop:
|
|---|
| [152] | 325 | XTIDE_OUTSW
|
|---|
| 326 | XTIDE_OUTSW
|
|---|
| 327 | XTIDE_OUTSW
|
|---|
| 328 | XTIDE_OUTSW
|
|---|
| [150] | 329 | loop .OutswLoop
|
|---|
| 330 | pop bx
|
|---|
| 331 | pop ds
|
|---|
| 332 | ret
|
|---|
| 333 |
|
|---|
| [152] | 334 | ;----
|
|---|
| [150] | 335 | ALIGN JUMP_ALIGN
|
|---|
| 336 | SingleByteWrite:
|
|---|
| 337 | %ifdef USE_186 ; OUTS instruction available
|
|---|
| [152] | 338 | shl cx, 1 ; WORD count to BYTE count
|
|---|
| 339 | eSEG es ; Source is ES segment
|
|---|
| [150] | 340 | rep outsb
|
|---|
| 341 | %else ; If 8088/8086
|
|---|
| [152] | 342 | shr cx, 1 ; WORD count to DWORD count
|
|---|
| 343 | push ds ; Store DS
|
|---|
| 344 | push es ; Copy ES...
|
|---|
| 345 | pop ds ; ...to DS
|
|---|
| [150] | 346 | ALIGN JUMP_ALIGN
|
|---|
| 347 | .OutsdLoop:
|
|---|
| [152] | 348 | lodsb ; Load from [DS:SI] to AL
|
|---|
| [150] | 349 | out dx, al
|
|---|
| 350 | lodsb
|
|---|
| 351 | out dx, al
|
|---|
| 352 | lodsb
|
|---|
| 353 | out dx, al
|
|---|
| 354 | lodsb
|
|---|
| 355 | out dx, al
|
|---|
| 356 | loop .OutsdLoop
|
|---|
| [152] | 357 | pop ds ; Restore DS
|
|---|
| [150] | 358 | %endif
|
|---|
| 359 | ret
|
|---|
| 360 |
|
|---|
| [152] | 361 | ;---
|
|---|
| 362 | ALIGN JUMP_ALIGN
|
|---|
| 363 | WordWriteForXTIDEmod:
|
|---|
| 364 | push ds
|
|---|
| 365 | times 2 shr cx, 1 ; Loop unrolling
|
|---|
| 366 | push es ; Copy ES...
|
|---|
| 367 | pop ds ; ...to DS
|
|---|
| 368 | ALIGN JUMP_ALIGN
|
|---|
| 369 | .WriteNextQword:
|
|---|
| 370 | XTIDE_MOD_OUTSW
|
|---|
| 371 | XTIDE_MOD_OUTSW
|
|---|
| 372 | XTIDE_MOD_OUTSW
|
|---|
| 373 | XTIDE_MOD_OUTSW
|
|---|
| 374 | loop .WriteNextQword
|
|---|
| 375 | pop ds
|
|---|
| 376 | ret
|
|---|
| [150] | 377 |
|
|---|
| [152] | 378 | ;----
|
|---|
| 379 | ALIGN JUMP_ALIGN
|
|---|
| 380 | WordWrite:
|
|---|
| 381 | eSEG es ; Source is ES segment
|
|---|
| 382 | rep
|
|---|
| 383 | db 6Fh ; OUTSW
|
|---|
| 384 | ret
|
|---|
| 385 |
|
|---|
| 386 | ALIGN JUMP_ALIGN
|
|---|
| 387 | DWordWrite:
|
|---|
| 388 | shr cx, 1 ; WORD count to DWORD count
|
|---|
| 389 | eSEG es ; Source is ES segment
|
|---|
| 390 | rep
|
|---|
| 391 | db 66h ; Override operand size to 32-bit
|
|---|
| 392 | db 6Fh ; OUTSW/OUTSD
|
|---|
| 393 | ret
|
|---|
| 394 |
|
|---|
| 395 |
|
|---|
| 396 |
|
|---|
| [150] | 397 | ; Lookup tables to get transfer function based on bus type
|
|---|
| 398 | ALIGN WORD_ALIGN
|
|---|
| 399 | g_rgfnPioRead:
|
|---|
| [152] | 400 | dw DualByteReadForXtide ; DEVICE_8BIT_DUAL_PORT_XTIDE
|
|---|
| 401 | %ifdef USE_186
|
|---|
| 402 | dw WordReadForXTplusAndAT ; DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
|
|---|
| 403 | %else
|
|---|
| 404 | dw WordReadForXTIDEmod
|
|---|
| 405 | %endif
|
|---|
| 406 | dw SingleByteRead ; DEVICE_8BIT_SINGLE_PORT
|
|---|
| 407 | dw WordReadForXTplusAndAT ; DEVICE_16BIT_ATA
|
|---|
| 408 | dw DWordRead ; DEVICE_32BIT_ATA
|
|---|
| 409 |
|
|---|
| [150] | 410 | g_rgfnPioWrite:
|
|---|
| [152] | 411 | dw DualByteWriteForXtide ; DEVICE_8BIT_DUAL_PORT_XTIDE
|
|---|
| 412 | dw WordWriteForXTIDEmod ; DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
|
|---|
| 413 | dw SingleByteWrite ; DEVICE_8BIT_SINGLE_PORT
|
|---|
| 414 | dw WordWrite ; DEVICE_16BIT_ATA
|
|---|
| 415 | dw DWordWrite ; DEVICE_32BIT_ATA
|
|---|
