source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdePioBlock.asm@ 553

Last change on this file since 553 was 545, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Integrated XT-CFv3 support by James Pearce.
  • XT-CFv2 memory mapped I/O and DMA modes are no longer supported (but PIO mode is).
File size: 7.4 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : IDE Read/Write functions for transferring
3; block using PIO modes.
4; These functions should only be called from IdeTransfer.asm.
5
6;
7; XTIDE Universal BIOS and Associated Tools
8; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
9;
10; This program is free software; you can redistribute it and/or modify
11; it under the terms of the GNU General Public License as published by
12; the Free Software Foundation; either version 2 of the License, or
13; (at your option) any later version.
14;
15; This program is distributed in the hope that it will be useful,
16; but WITHOUT ANY WARRANTY; without even the implied warranty of
17; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18; GNU General Public License for more details.
19; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
20;
21
22; Modified by JJP for XT-CFv3 support, Mar-13
23
24; Section containing code
25SECTION .text
26
27
28; --------------------------------------------------------------------------------------------------
29;
30; READ routines follow
31;
32; --------------------------------------------------------------------------------------------------
33
34
35%ifdef MODULE_8BIT_IDE
36
37;--------------------------------------------------------------------
38; IdePioBlock_ReadFromXtideRev1
39; Parameters:
40; CX: Block size in 512 byte sectors
41; DX: IDE Data port address
42; ES:DI: Normalized ptr to buffer to receive data
43; Returns:
44; Nothing
45; Corrupts registers:
46; AX, BX, CX
47;--------------------------------------------------------------------
48ALIGN JUMP_ALIGN
49IdePioBlock_ReadFromXtideRev1:
50 UNROLL_SECTORS_IN_CX_TO_OWORDS
51 mov bl, 8 ; Bit mask for toggling data low/high reg
52ALIGN JUMP_ALIGN
53.InswLoop:
54 %rep 8 ; WORDs
55 XTIDE_INSW
56 %endrep
57 loop .InswLoop
58 ret
59
60
61;--------------------------------------------------------------------
62; IdePioBlock_ReadFrom8bitDataPort
63;
64; 8-bit PIO from a single data port.
65;
66; Parameters:
67; CX: Block size in 512 byte sectors
68; DX: IDE Data port address
69; ES:DI: Normalized ptr to buffer to receive data
70; Returns:
71; Nothing
72; Corrupts registers:
73; AX, BX, CX
74;--------------------------------------------------------------------
75ALIGN JUMP_ALIGN
76IdePioBlock_ReadFrom8bitDataPort:
77%ifdef USE_186
78 shl cx, 9 ; Sectors to BYTEs
79 rep insb
80 ret
81%else ; If 8088/8086
82 UNROLL_SECTORS_IN_CX_TO_OWORDS
83ALIGN JUMP_ALIGN
84.ReadNextOword:
85 %rep 16 ; BYTEs
86 in al, dx ; Read BYTE
87 stosb ; Store BYTE to [ES:DI]
88 %endrep
89 loop .ReadNextOword
90 ret
91%endif
92
93%endif ; MODULE_8BIT_IDE
94
95
96;--------------------------------------------------------------------
97; IdePioBlock_ReadFrom16bitDataPort
98;
99; 16-bit PIO from a single data port.
100;
101; Parameters:
102; CX: Block size in 512 byte sectors
103; DX: IDE Data port address
104; ES:DI: Normalized ptr to buffer to receive data
105; Returns:
106; Nothing
107; Corrupts registers:
108; AX, BX, CX
109;--------------------------------------------------------------------
110ALIGN JUMP_ALIGN
111IdePioBlock_ReadFrom16bitDataPort:
112%ifdef USE_186
113 xchg cl, ch ; Sectors to WORDs
114 rep insw
115 ret
116
117%else ; If 8088/8086
118 UNROLL_SECTORS_IN_CX_TO_OWORDS
119ALIGN JUMP_ALIGN
120.ReadNextOword:
121 %rep 8 ; WORDs
122 in ax, dx ; Read BYTE
123 stosw ; Store BYTE to [ES:DI]
124 %endrep
125 loop .ReadNextOword
126 ret
127%endif
128
129
130;--------------------------------------------------------------------
131ALIGN JUMP_ALIGN
132IdePioBlock_ReadFrom32bitDataPort:
133 db 0C1h ; SHL
134 db 0E1h ; CX
135 db 7 ; 7 (Sectors to DWORDs)
136 rep
137 db 66h ; Override operand size to 32-bit
138 db 6Dh ; INSW/INSD
139 ret
140
141
142
143; --------------------------------------------------------------------------------------------------
144;
145; WRITE routines follow
146;
147; --------------------------------------------------------------------------------------------------
148
149%ifdef MODULE_8BIT_IDE
150
151;--------------------------------------------------------------------
152; IdePioBlock_WriteToXtideRev1
153; Parameters:
154; CX: Block size in 512-byte sectors
155; DX: IDE Data port address
156; ES:SI: Normalized ptr to buffer containing data
157; Returns:
158; Nothing
159; Corrupts registers:
160; AX, BX, CX, DX
161;--------------------------------------------------------------------
162ALIGN JUMP_ALIGN
163IdePioBlock_WriteToXtideRev1:
164 push ds
165 UNROLL_SECTORS_IN_CX_TO_QWORDS
166 mov bl, 8 ; Bit mask for toggling data low/high reg
167 push es ; Copy ES...
168 pop ds ; ...to DS
169ALIGN JUMP_ALIGN
170.OutswLoop:
171 %rep 4 ; WORDs
172 XTIDE_OUTSW
173 %endrep
174 loop .OutswLoop
175 pop ds
176 ret
177
178
179;--------------------------------------------------------------------
180; IdePioBlock_WriteToXtideRev2 or rev 1 with swapped A0 and A3 (chuck-mod)
181; Parameters:
182; CX: Block size in 512-byte sectors
183; DX: IDE Data port address
184; ES:SI: Normalized ptr to buffer containing data
185; Returns:
186; Nothing
187; Corrupts registers:
188; AX, BX, CX, DX
189;--------------------------------------------------------------------
190ALIGN JUMP_ALIGN
191IdePioBlock_WriteToXtideRev2:
192 UNROLL_SECTORS_IN_CX_TO_QWORDS
193 push ds
194 push es ; Copy ES...
195 pop ds ; ...to DS
196ALIGN JUMP_ALIGN
197.WriteNextQword:
198 %rep 4 ; WORDs
199 XTIDE_MOD_OUTSW ; special macro
200 %endrep
201 loop .WriteNextQword
202 pop ds
203 ret
204
205
206;--------------------------------------------------------------------
207; IdePioBlock_WriteTo8bitDataPort
208; Parameters:
209; CX: Block size in 512-byte sectors
210; DX: IDE Data port address
211; ES:SI: Normalized ptr to buffer containing data
212; Returns:
213; Nothing
214; Corrupts registers:
215; AX, BX, CX, DX
216;--------------------------------------------------------------------
217ALIGN JUMP_ALIGN
218IdePioBlock_WriteTo8bitDataPort:
219%ifdef USE_186
220 shl cx, 9 ; Sectors to BYTEs
221 es ; Source is ES segment
222 rep outsb
223 ret
224
225%else ; If 8088/8086
226 UNROLL_SECTORS_IN_CX_TO_QWORDS
227 push ds
228 ;mov ax, es
229 ;mov ds, ax ; move es to ds via ax (does this run faster on 8088?)
230 push es
231 pop ds
232ALIGN JUMP_ALIGN
233.WriteNextQword:
234 %rep 8 ; BYTEs
235 lodsb ; Load BYTE from [DS:SI]
236 out dx, al ; Write BYTE
237 %endrep
238 loop .WriteNextQword
239 pop ds
240 ret
241%endif
242
243%endif ; MODULE_8BIT_IDE
244
245
246;--------------------------------------------------------------------
247; IdePioBlock_WriteTo16bitDataPort Normal 16-bit IDE, XT-CFv3 in BIU Mode
248; IdePioBlock_WriteTo32bitDataPort VLB/PCI 32-bit IDE
249; Parameters:
250; CX: Block size in 512-byte sectors
251; DX: IDE Data port address
252; ES:SI: Normalized ptr to buffer containing data
253; Returns:
254; Nothing
255; Corrupts registers:
256; AX, BX, CX, DX
257;--------------------------------------------------------------------
258ALIGN JUMP_ALIGN
259IdePioBlock_WriteTo16bitDataPort:
260%ifdef USE_186
261 xchg cl, ch ; Sectors to WORDs
262 es ; Source is ES segment
263 rep outsw
264 ret
265
266%else ; If 8088/8086
267 UNROLL_SECTORS_IN_CX_TO_QWORDS
268 push ds
269 ;mov ax, es
270 ;mov ds, ax ; move es to ds via ax (does this run faster on 8088?)
271 push es
272 pop ds
273ALIGN JUMP_ALIGN
274.WriteNextQword:
275 %rep 4 ; WORDs
276 lodsw ; Load BYTE from [DS:SI]
277 out dx, ax ; Write BYTE
278 %endrep
279 loop .WriteNextQword
280 pop ds
281 ret
282%endif ; if/else USE_186
283
284;--------------------------------------------------------------------
285ALIGN JUMP_ALIGN
286IdePioBlock_WriteTo32bitDataPort:
287 db 0C1h ; SHL
288 db 0E1h ; CX
289 db 7 ; 7 (Sectors to DWORDs)
290 es ; Source is ES segment
291 rep
292 db 66h ; Override operand size to 32-bit
293 db 6Fh ; OUTSW/OUTSD
294 ret
Note: See TracBrowser for help on using the repository browser.