source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeError.asm@ 571

Last change on this file since 571 was 567, checked in by krille_n_@…, 11 years ago

Changes:

  • Renamed MODULE_FEATURE_SETS to MODULE_POWER_MANAGEMENT.
  • Renamed MODULE_VERY_LATE_INITIALIZATION to MODULE_VERY_LATE_INIT and removed it from the official builds.
  • Removed the code that skips detection of slave drives on XT-CF controllers since slave drives can be used with Lo-tech ISA CompactFlash boards.
  • Added autodetection of the SVC ADP50L controller to XTIDECFG.
  • The autodetection of XT-CF controllers now requires MODULE_8BIT_IDE_ADVANCED in the loaded BIOS.
  • Fixed a bug in XTIDECFG from r502 where the "Base (cmd block) address" menu option would be displayed when a serial device was selected as the IDE controller.
  • XTIDECFG would display the "Enable interrupt" menu option for the XTIDE r1 but not for the XTIDE r2. It's now displayed for both controller types.
  • Disabled the "Internal Write Cache" menu option in the Master/Slave Drive menus for serial device type drives.
  • Optimizations and other fixes.
File size: 3.7 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : IDE Device error functions.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
24 %if $ <> PollBsyOnly.End
25 %error "IdeError.asm must come immediately after IdeWait.asm (PollBsyOnly falls into IdeError_GetBiosErrorCodeToAHfromPolledStatusRegisterInAL)!"
26 %endif
27%endif
28
29;--------------------------------------------------------------------
30; IdeError_GetBiosErrorCodeToAHfromPolledStatusRegisterInAL
31; Parameters:
32; AL: IDE Status Register contents
33; DS:DI: Ptr to DPT (in RAMVARS segment)
34; Returns:
35; AH: BIOS error code
36; CF: Set if error
37; Cleared if no error
38; Corrupts registers:
39; AL, BX, DX
40;--------------------------------------------------------------------
41ALIGN JUMP_ALIGN
42IdeError_GetBiosErrorCodeToAHfromPolledStatusRegisterInAL:
43 mov ah, al ; IDE Status Register to AH
44 INPUT_TO_AL_FROM_IDE_REGISTER ERROR_REGISTER_in
45 xchg al, ah ; Status Register now in AL, Error Register now in AH
46 ; Fall to GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX
47
48
49;--------------------------------------------------------------------
50; GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX
51; Parameters:
52; AL: IDE Status Register contents
53; AH: IDE Error Register contents
54; Returns:
55; AH: BIOS INT 13h error code
56; CF: Set if error
57; Cleared if no error
58; Corrupts registers:
59; BX
60;--------------------------------------------------------------------
61ALIGN JUMP_ALIGN
62GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX:
63 test al, FLG_STATUS_BSY | FLG_STATUS_DF | FLG_STATUS_CORR | FLG_STATUS_ERR ; Clears CF
64 jnz SHORT .CheckErrorBitsFromStatusRegisterInAL
65 ; The MSB of AL (FLG_STATUS_BSY) is cleared at this point.
66 cbw ; No errors, zero AH (CF already cleared)
67 ret
68
69ALIGN JUMP_ALIGN
70.CheckErrorBitsFromStatusRegisterInAL:
71 js SHORT .Flg_Status_Bsy ; Jump if FLG_STATUS_BSY
72 test al, FLG_STATUS_ERR ; Error specified in Error register?
73 jnz SHORT .ConvertBiosErrorToAHfromErrorRegisterInAH
74 mov ah, RET_HD_ECC ; Assume ECC corrected error
75 test al, FLG_STATUS_CORR ; ECC corrected error?
76 jnz SHORT .ReturnBiosErrorCodeInAH
77 mov ah, RET_HD_CONTROLLER ; Must be Device Fault
78 SKIP2B bx
79.Flg_Status_Bsy:
80 mov ah, RET_HD_TIMEOUT
81.ReturnBiosErrorCodeInAH:
82 stc
83 ret
84
85.ConvertBiosErrorToAHfromErrorRegisterInAH:
86 stc ; Needed in case Error register (AH) is zero
87 mov bx, .rgbRetCodeLookup-1
88.ErrorBitLoop:
89 inc bx
90 rcr ah, 1
91 jnc SHORT .ErrorBitLoop ; CF will be set eventually
92 mov ah, [cs:bx]
93 ret
94
95
96.rgbRetCodeLookup:
97 db RET_HD_ADDRMARK ; Bit0=AMNF, Address Mark Not Found
98 db RET_HD_SEEK_FAIL ; Bit1=TK0NF, Track 0 Not Found
99 db RET_HD_INVALID ; Bit2=ABRT, Aborted Command
100 db RET_HD_NOTLOCKED ; Bit3=MCR, Media Change Requested
101 db RET_HD_NOT_FOUND ; Bit4=IDNF, ID Not Found
102 db RET_HD_LOCKED ; Bit5=MC, Media Changed
103 db RET_HD_UNCORRECC ; Bit6=UNC, Uncorrectable Data Error
104 db RET_HD_BADSECTOR ; Bit7=BBK, Bad Block Detected
105 db RET_HD_STATUSERR ; When Error Register is zero
Note: See TracBrowser for help on using the repository browser.