source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeError.asm@ 269

Last change on this file since 269 was 267, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • More JR-IDE/ISA fixes.
File size: 3.2 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : IDE Device error functions.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; IdeError_GetBiosErrorCodeToAHfromPolledStatusRegisterInAL
9; Parameters:
10; AL: IDE Status Register contents
11; DS:DI: Ptr to DPT (in RAMVARS segment)
12; Returns:
13; AH: BIOS error code
14; CF: Set if error
15; Cleared if no error
16; Corrupts registers:
17; AL, BX, DX
18;--------------------------------------------------------------------
19ALIGN JUMP_ALIGN
20IDEDEVICE%+Error_GetBiosErrorCodeToAHfromPolledStatusRegisterInAL:
21 mov ah, al ; IDE Status Register to AH
22 INPUT_TO_AL_FROM_IDE_REGISTER ERROR_REGISTER_in
23
24%ifndef ASSEMBLE_SHARED_IDE_DEVICE_FUNCTIONS ; JR-IDE/ISA
25 jmp ContinueFromMemIdeError
26%else
27ContinueFromMemIdeError:
28 xchg al, ah ; Status Register now in AL, Error Register now in AH
29
30 ; I don't think anything actually reads these from BDA
31 push ds
32 LOAD_BDA_SEGMENT_TO ds, dx
33 mov [HDBDA.wHDStAndErr], ax
34 pop ds
35
36 ; Fall to GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX
37
38
39;--------------------------------------------------------------------
40; GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX
41; Parameters:
42; AL: IDE Status Register contents
43; AH: IDE Error Register contents
44; Returns:
45; AH: BIOS INT 13h error code
46; CF: Set if error
47; Cleared if no error
48; Corrupts registers:
49; BX
50;--------------------------------------------------------------------
51ALIGN JUMP_ALIGN
52GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX:
53 test al, FLG_STATUS_BSY
54 jz SHORT .CheckErrorBitsFromStatusRegisterInAL
55 mov ah, RET_HD_TIMEOUT
56 jmp SHORT .ReturnBiosErrorCodeInAH
57
58ALIGN JUMP_ALIGN
59.CheckErrorBitsFromStatusRegisterInAL:
60 test al, FLG_STATUS_DF | FLG_STATUS_CORR | FLG_STATUS_ERR
61 jnz SHORT .ProcessErrorFromStatusRegisterInAL
62 xor ah, ah ; No errors, zero AH and CF
63 ret
64
65.ProcessErrorFromStatusRegisterInAL:
66 test al, FLG_STATUS_ERR ; Error specified in Error register?
67 jnz SHORT .ConvertBiosErrorToAHfromErrorRegisterInAH
68 mov ah, RET_HD_ECC ; Assume ECC corrected error
69 test al, FLG_STATUS_CORR ; ECC corrected error?
70 jnz SHORT .ReturnBiosErrorCodeInAH
71 mov ah, RET_HD_CONTROLLER ; Must be Device Fault
72 jmp SHORT .ReturnBiosErrorCodeInAH
73
74.ConvertBiosErrorToAHfromErrorRegisterInAH:
75 xor bx, bx ; Clear CF
76.ErrorBitLoop:
77 rcr ah, 1 ; Set CF if error bit set
78 jc SHORT .LookupErrorCode
79 inc bx
80 test ah, ah ; Clear CF
81 jnz SHORT .ErrorBitLoop
82.LookupErrorCode:
83 mov ah, [cs:bx+.rgbRetCodeLookup]
84.ReturnBiosErrorCodeInAH:
85 stc ; Set CF since error
86 ret
87
88.rgbRetCodeLookup:
89 db RET_HD_ADDRMARK ; Bit0=AMNF, Address Mark Not Found
90 db RET_HD_SEEK_FAIL ; Bit1=TK0NF, Track 0 Not Found
91 db RET_HD_INVALID ; Bit2=ABRT, Aborted Command
92 db RET_HD_NOTLOCKED ; Bit3=MCR, Media Change Requested
93 db RET_HD_NOT_FOUND ; Bit4=IDNF, ID Not Found
94 db RET_HD_LOCKED ; Bit5=MC, Media Changed
95 db RET_HD_UNCORRECC ; Bit6=UNC, Uncorrectable Data Error
96 db RET_HD_BADSECTOR ; Bit7=BBK, Bad Block Detected
97 db RET_HD_STATUSERR ; When Error Register is zero
98%endif
Note: See TracBrowser for help on using the repository browser.