1 | ; Project name : XTIDE Universal BIOS
|
---|
2 | ; Description : IDE Device error functions.
|
---|
3 |
|
---|
4 | ; Section containing code
|
---|
5 | SECTION .text
|
---|
6 |
|
---|
7 | ;--------------------------------------------------------------------
|
---|
8 | ; IdeError_GetBiosErrorCodeToAHfromPolledStatusRegisterInAL
|
---|
9 | ; Parameters:
|
---|
10 | ; AL: IDE Status Register contents
|
---|
11 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
---|
12 | ; Returns:
|
---|
13 | ; AH: BIOS error code
|
---|
14 | ; CF: Set if error
|
---|
15 | ; Cleared if no error
|
---|
16 | ; Corrupts registers:
|
---|
17 | ; AL, BX, DX
|
---|
18 | ;--------------------------------------------------------------------
|
---|
19 | ALIGN JUMP_ALIGN
|
---|
20 | IdeError_GetBiosErrorCodeToAHfromPolledStatusRegisterInAL:
|
---|
21 | mov ah, al ; IDE Status Register to AH
|
---|
22 | mov dl, ERROR_REGISTER_in
|
---|
23 | call Device_InputToALfromIdeRegisterInDL
|
---|
24 | xchg al, ah ; Status Register now in AL, Error Register now in AH
|
---|
25 |
|
---|
26 | ; I don't think anything actually reads these from BDA
|
---|
27 | push ds
|
---|
28 | LOAD_BDA_SEGMENT_TO ds, dx
|
---|
29 | mov [HDBDA.wHDStAndErr], ax
|
---|
30 | pop ds
|
---|
31 |
|
---|
32 | ; Fall to GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX
|
---|
33 |
|
---|
34 |
|
---|
35 | ;--------------------------------------------------------------------
|
---|
36 | ; GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX
|
---|
37 | ; Parameters:
|
---|
38 | ; AL: IDE Status Register contents
|
---|
39 | ; AH: IDE Error Register contents
|
---|
40 | ; Returns:
|
---|
41 | ; AH: BIOS INT 13h error code
|
---|
42 | ; CF: Set if error
|
---|
43 | ; Cleared if no error
|
---|
44 | ; Corrupts registers:
|
---|
45 | ; BX
|
---|
46 | ;--------------------------------------------------------------------
|
---|
47 | ALIGN JUMP_ALIGN
|
---|
48 | GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX:
|
---|
49 | test al, FLG_STATUS_BSY
|
---|
50 | jz SHORT .CheckErrorBitsFromStatusRegisterInAL
|
---|
51 | mov ah, RET_HD_TIMEOUT
|
---|
52 | jmp SHORT .ReturnBiosErrorCodeInAH
|
---|
53 |
|
---|
54 | ALIGN JUMP_ALIGN
|
---|
55 | .CheckErrorBitsFromStatusRegisterInAL:
|
---|
56 | test al, FLG_STATUS_DF | FLG_STATUS_CORR | FLG_STATUS_ERR
|
---|
57 | jnz SHORT .ProcessErrorFromStatusRegisterInAL
|
---|
58 | xor ah, ah ; No errors, zero AH and CF
|
---|
59 | ret
|
---|
60 |
|
---|
61 | .ProcessErrorFromStatusRegisterInAL:
|
---|
62 | test al, FLG_STATUS_ERR ; Error specified in Error register?
|
---|
63 | jnz SHORT .ConvertBiosErrorToAHfromErrorRegisterInAH
|
---|
64 | mov ah, RET_HD_ECC ; Assume ECC corrected error
|
---|
65 | test al, FLG_STATUS_CORR ; ECC corrected error?
|
---|
66 | jnz SHORT .ReturnBiosErrorCodeInAH
|
---|
67 | mov ah, RET_HD_CONTROLLER ; Must be Device Fault
|
---|
68 | jmp SHORT .ReturnBiosErrorCodeInAH
|
---|
69 |
|
---|
70 | .ConvertBiosErrorToAHfromErrorRegisterInAH:
|
---|
71 | xor bx, bx ; Clear CF
|
---|
72 | .ErrorBitLoop:
|
---|
73 | rcr ah, 1 ; Set CF if error bit set
|
---|
74 | jc SHORT .LookupErrorCode
|
---|
75 | inc bx
|
---|
76 | test ah, ah ; Clear CF
|
---|
77 | jnz SHORT .ErrorBitLoop
|
---|
78 | .LookupErrorCode:
|
---|
79 | mov ah, [cs:bx+.rgbRetCodeLookup]
|
---|
80 | .ReturnBiosErrorCodeInAH:
|
---|
81 | stc ; Set CF since error
|
---|
82 | ret
|
---|
83 |
|
---|
84 | .rgbRetCodeLookup:
|
---|
85 | db RET_HD_ADDRMARK ; Bit0=AMNF, Address Mark Not Found
|
---|
86 | db RET_HD_SEEK_FAIL ; Bit1=TK0NF, Track 0 Not Found
|
---|
87 | db RET_HD_INVALID ; Bit2=ABRT, Aborted Command
|
---|
88 | db RET_HD_NOTLOCKED ; Bit3=MCR, Media Change Requested
|
---|
89 | db RET_HD_NOT_FOUND ; Bit4=IDNF, ID Not Found
|
---|
90 | db RET_HD_LOCKED ; Bit5=MC, Media Changed
|
---|
91 | db RET_HD_UNCORRECC ; Bit6=UNC, Uncorrectable Data Error
|
---|
92 | db RET_HD_BADSECTOR ; Bit7=BBK, Bad Block Detected
|
---|
93 | db RET_HD_STATUSERR ; When Error Register is zero
|
---|