source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDmaBlock.asm @ 526

Last change on this file since 526 was 526, checked in by krille_n_@…, 11 years ago

Changes:

  • Update of the copyright notices to include the year 2013.
File size: 6.3 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   IDE Read/Write functions for transferring
3;                   block using DMA.
4;                   These functions should only be called from IdeTransfer.asm.
5
6;
7; XTIDE Universal BIOS and Associated Tools
8; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
9;
10; This program is free software; you can redistribute it and/or modify
11; it under the terms of the GNU General Public License as published by
12; the Free Software Foundation; either version 2 of the License, or
13; (at your option) any later version.
14;
15; This program is distributed in the hope that it will be useful,
16; but WITHOUT ANY WARRANTY; without even the implied warranty of
17; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18; GNU General Public License for more details.
19; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
20;
21
22
23; Section containing code
24SECTION .text
25
26;--------------------------------------------------------------------
27; IdeDmaBlock_WriteToXTCF
28;   Parameters:
29;       CX:     Block size in 512 byte sectors
30;       DX:     XTCF Base Port Address
31;       ES:SI:  Physical address to buffer to receive data
32;   Returns:
33;       Nothing
34;   Corrupts registers:
35;       AX, BX, CX, DX
36;--------------------------------------------------------------------
37ALIGN JUMP_ALIGN
38IdeDmaBlock_WriteToXTCF:
39    xchg    si, di
40    mov     bl, CHANNEL_3 | READ | AUTOINIT_DISABLE | ADDRESS_INCREMENT | DEMAND_MODE
41    call    TransferBlockToOrFromXTCF
42    xchg    di, si
43    ret
44
45
46;--------------------------------------------------------------------
47; IdeDmaBlock_ReadFromXTCF
48;   Parameters:
49;       CX:     Block size in 512 byte sectors
50;       DX:     XTCF Base Port Address
51;       ES:DI:  Physical address to buffer to receive data
52;   Returns:
53;       Nothing
54;   Corrupts registers:
55;       AX, BX, CX, DX
56;--------------------------------------------------------------------
57ALIGN JUMP_ALIGN
58IdeDmaBlock_ReadFromXTCF:
59    mov     bl, CHANNEL_3 | WRITE | AUTOINIT_DISABLE | ADDRESS_INCREMENT | DEMAND_MODE
60    ; Fall to TransferBlockToOrFromXTCF
61
62
63;--------------------------------------------------------------------
64; TransferBlockToOrFromXTCF
65;   Parameters:
66;       BL:     Mode byte for DMA Mode Register
67;       CX:     Block size in 512 byte sectors
68;       DX:     XTCF Base Port Address
69;       ES:DI:  Physical address to buffer to receive data
70;   Returns:
71;       Nothing
72;   Corrupts registers:
73;       AX, BX, CX, DX
74;--------------------------------------------------------------------
75TransferBlockToOrFromXTCF:
76    ; 8-bit DMA transfers must be done within 64k physical page.
77    ; XT-CF support maximum of 64 sector (32768 bytes) blocks in DMA mode
78    ; so we never need to separate transfer to more than 2 separate DMA operations.
79
80    ; Load XT-CF Control Register port to DX
81    add     dl, XTCF_CONTROL_REGISTER
82
83    ; Calculate bytes for first page
84    mov     ax, di
85    neg     ax                                      ; AX = Max BYTEs for first page
86%ifdef USE_186
87    shl     cx, 9                                   ; CX = Block size in BYTEs
88%else
89    xchg    cl, ch
90    shl     cx, 1
91%endif
92    cmp     cx, ax
93    jbe     SHORT .TransferLastDmaPageWithSizeInCX
94
95    ; Push size for second DMA page
96    xchg    cx, ax                                  ; CX = BYTEs for first page
97    sub     ax, cx                                  ; AX = BYTEs for second page
98    push    ax
99
100    ; Transfer first DMA page
101    call    StartDMAtransferForXTCFwithDmaModeInBL
102    pop     cx                                      ; Pop size for second DMA page
103
104.TransferLastDmaPageWithSizeInCX:
105    ; Fall to StartDMAtransferForXTCFwithDmaModeInBL
106
107
108;--------------------------------------------------------------------
109; StartDMAtransferForXTCFwithDmaModeInBL
110;   Parameters:
111;       BL:     Byte for DMA Mode Register
112;       CX:     Number of BYTEs to transfer (1...32768 since max block size is limited to 64)
113;       DX:     XTCF Control Register
114;   Returns:
115;       Nothing
116;   Corrupts registers:
117;       AX
118;--------------------------------------------------------------------
119ALIGN JUMP_ALIGN
120StartDMAtransferForXTCFwithDmaModeInBL:
121    ; Program 8-bit DMA Controller
122    ; Disable Interrupts and DMA Channel 3 during DMA setup
123    mov     al, SET_CH3_MASK_BIT
124    cli                                     ; Disable interrupts
125    out     MASK_REGISTER_DMA8_out, al      ; Disable DMA Channel 3
126
127    ; Set DMA Mode (read or write using channel 3)
128    mov     al, bl
129    out     MODE_REGISTER_DMA8_out, al
130
131    ; Set address to DMA controller
132    out     CLEAR_FLIPFLOP_DMA8_out, al     ; Reset flip-flop to low byte
133    mov     ax, es
134    out     PAGE_DMA8_CH_3, al
135    mov     ax, di
136    out     BASE_AND_CURRENT_ADDRESS_REGISTER_DMA8_CH3_out, al  ; Low byte
137    mov     al, ah
138    out     BASE_AND_CURRENT_ADDRESS_REGISTER_DMA8_CH3_out, al  ; High byte
139
140    ; Set number of bytes to transfer (DMA controller must be programmed number of bytes - 1)
141    mov     ax, cx
142    dec     ax                              ; DMA controller is programmed for one byte less
143    out     BASE_AND_CURRENT_COUNT_REGISTER_DMA8_CH3_out, al    ; Low byte
144    mov     al, ah
145    out     BASE_AND_CURRENT_COUNT_REGISTER_DMA8_CH3_out, al    ; High byte
146
147    ; Enable DMA Channel 3
148    mov     al, CLEAR_CH3_MASK_BIT
149    out     MASK_REGISTER_DMA8_out, al      ; Enable DMA Channel 3
150    sti                                     ; Enable interrupts
151
152
153%if 0 ; Slow DMA code
154    ; XT-CF transfers 16 bytes at a time. We need to manually
155    ; start transfer for every block.
156ALIGN JUMP_ALIGN
157.TransferNextBlock:
158    mov     al, RAISE_DRQ_AND_CLEAR_XTCF_XFER_COUNTER
159    cli                                 ; We want no ISR to read DMA Status Register before we do
160    out     dx, al                      ; Transfer up to 16 bytes to/from XT-CF card
161    ; * Here XT-CF sets CPU to wait states during transfer *
162    in      al, STATUS_REGISTER_DMA8_in
163    sti
164    test    al, FLG_CH3_HAS_REACHED_TERMINAL_COUNT
165    jz      SHORT .TransferNextBlock    ; All bytes transferred?
166%endif ; Slow DMA code
167
168
169%if 1 ; Fast DMA code
170    push    cx
171    add     cx, BYTE 15                 ; Include any partial DMA block (since we had to divide transfer to 64k physical pages)
172    eSHR_IM cx, 4                       ; Drive Block size to 16 Byte DMA Block Size
173
174.JustOneMoreDmaBlock:
175    mov     al, RAISE_DRQ_AND_CLEAR_XTCF_XFER_COUNTER
176ALIGN JUMP_ALIGN
177.TransferNextDmaBlock:
178    out     dx, al                      ; Transfer 16 bytes to/from XT-CF card
179    loop    .TransferNextDmaBlock
180
181    inc     cx                          ; set up CX, in case we need to do an extra iteration
182    in      al, STATUS_REGISTER_DMA8_in
183    test    al, FLG_CH3_HAS_REACHED_TERMINAL_COUNT
184    jz      SHORT .JustOneMoreDmaBlock          ; it wasn't set so get more bytes
185    pop     cx
186%endif ; Fast DMA code
187
188
189    ; Restore XT-CF to normal operation
190    mov     al, XTCF_DMA_MODE
191    out     dx, al
192
193    ; Increment physical address in ES:DI
194    mov     ax, es
195    add     di, cx
196    adc     al, ah
197    mov     es, ax
198    ret
Note: See TracBrowser for help on using the repository browser.