source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDPT.asm@ 611

Last change on this file since 611 was 608, checked in by Tomi Tilli, 4 years ago

XT-CF gave false positive for PDC20x30 VLB-controller detection. Advanced controller detection is now done only for 16- and 32-bit standard IDE devices.

File size: 5.3 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Sets IDE Device specific parameters to DPT.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; IdeDPT_Finalize
25; Parameters:
26; DS:DI: Ptr to Disk Parameter Table
27; ES:SI: Ptr to 512-byte ATA information read from the drive
28; CS:BP: Ptr to IDEVARS for the controller
29; Returns:
30; CF: Clear, IDE interface only supports hard disks
31; Corrupts registers:
32; AX, BX, CX, DX
33;--------------------------------------------------------------------
34IdeDPT_Finalize: ; Unused entrypoint OK
35
36%ifdef MODULE_POWER_MANAGEMENT
37;--------------------------------------------------------------------
38; .DetectPowerManagementSupport
39; Parameters:
40; DS:DI: Ptr to Disk Parameter Table
41; ES:SI: Ptr to 512-byte ATA information read from the drive
42; Returns:
43; Nothing
44; Corrupts registers:
45; AL
46;--------------------------------------------------------------------
47.DetectPowerManagementSupport:
48 mov al, [es:si+ATA6.wSetSup82]
49 and al, A6_wSetSup82_POWERMAN ; A6_wSetSup82_POWERMAN (bit 3) is the same
50 or [di+DPT.bFlagsHigh], al ; bit as FLGH_DPT_POWER_MANAGEMENT_SUPPORTED
51%endif ; MODULE_POWER_MANAGEMENT
52
53
54;--------------------------------------------------------------------
55; .StoreDeviceType
56; Parameters:
57; DS:DI: Ptr to Disk Parameter Table
58; CS:BP: Ptr to IDEVARS for the controller
59; Returns:
60; Nothing
61; Corrupts registers:
62; AL
63;--------------------------------------------------------------------
64.StoreDeviceType:
65 call IdeDPT_StoreDeviceTypeToDPTinDSDIfromIdevarsInCSBP
66
67
68;--------------------------------------------------------------------
69; .StoreBlockMode
70; Parameters:
71; DS:DI: Ptr to Disk Parameter Table
72; Returns:
73; Nothing
74; Corrupts registers:
75; Nothing
76;--------------------------------------------------------------------
77.StoreBlockMode:
78 mov BYTE [di+DPT_ATA.bBlockSize], 1
79
80
81%ifdef MODULE_ADVANCED_ATA
82;--------------------------------------------------------------------
83; .StorePioModeAndTimings
84; Parameters:
85; DS:DI: Ptr to Disk Parameter Table
86; ES:SI: Ptr to 512-byte ATA information read from the drive
87; CS:BP: Ptr to IDEVARS for the controller
88; Returns:
89; Nothing
90; Corrupts registers:
91; AX, BX, CX
92;--------------------------------------------------------------------
93.StorePioMode:
94 call AtaID_GetMaxPioModeToAXandMinCycleTimeToCX
95 mov [di+DPT_ADVANCED_ATA.wMinPioCycleTime], cx
96 mov [di+DPT_ADVANCED_ATA.bPioMode], al
97 or [di+DPT.bFlagsHigh], ah
98
99
100;--------------------------------------------------------------------
101; .DetectAdvancedIdeController
102; Parameters:
103; DS:DI: Ptr to Disk Parameter Table
104; ES:SI: Ptr to 512-byte ATA information read from the drive
105; CS:BP: Ptr to IDEVARS for the controller
106; Returns:
107; Nothing
108; Corrupts registers:
109; AX, BX, CX, DX
110;--------------------------------------------------------------------
111.DetectAdvancedIdeController:
112 ; Detection is only relevant on standard devices. XT-CF seems to give false positive for
113 ; PDC20x30 detection so better to skip detection for 8-bit devices
114 cmp BYTE [di+DPT_ATA.bDevice], DEVICE_32BIT_ATA
115 ja SHORT .NoAdvancedControllerDetected
116
117 mov bx, [di+DPT.wBasePort]
118 call AdvAtaInit_DetectControllerForIdeBaseInBX
119 mov [di+DPT_ADVANCED_ATA.wControllerID], ax ; Store zero if none detected
120 mov [di+DPT_ADVANCED_ATA.wControllerBasePort], dx
121 jnc SHORT .NoAdvancedControllerDetected
122
123 ; Use highest common PIO mode from controller and drive.
124 ; Many VLB controllers support PIO modes up to 2.
125 call AdvAtaInit_GetControllerMaxPioModeToALandMinPioCycleTimeToBX
126 jnz SHORT .ChangeTo32bitDevice
127
128 and [di+DPT.bFlagsHigh], ah ; Mask off FLGH_DPT_IORDY if IORDY not supported
129 MIN_U [di+DPT_ADVANCED_ATA.bPioMode], al
130 mov [di+DPT_ADVANCED_ATA.wMinPioCycleTime], bx
131
132 ; We have detected 32-bit controller so change Device Type since
133 ; it might have been set to 16-bit on IDEVARS
134.ChangeTo32bitDevice:
135 mov BYTE [di+DPT_ATA.bDevice], DEVICE_32BIT_ATA
136.NoAdvancedControllerDetected:
137%endif ; MODULE_ADVANCED_ATA
138
139
140; End DPT
141 clc
142 ret
143
144
145;--------------------------------------------------------------------
146; IdeDPT_StoreDeviceTypeToDPTinDSDIfromIdevarsInCSBP
147; Parameters:
148; DS:DI: Ptr to Disk Parameter Table
149; CS:BP: Ptr to IDEVARS for the controller
150; Returns:
151; Nothing
152; Corrupts registers:
153; AL
154;--------------------------------------------------------------------
155IdeDPT_StoreDeviceTypeToDPTinDSDIfromIdevarsInCSBP:
156 mov al, [cs:bp+IDEVARS.bDevice]
157 mov [di+DPT_ATA.bDevice], al
158 ret
Note: See TracBrowser for help on using the repository browser.