source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDPT.asm@ 363

Last change on this file since 363 was 363, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • Added Advanced ATA Module (MODULE_ADVANCED_ATA) with native support for QDI Vision QD6500 and QD6580 VLB IDE Controllers.
  • Hopefully optimized IDE transfer functions for 8088 (replaced some memory accesses from WORD to BYTE).
  • XT build does not fit in 8k at the moment!!!
File size: 4.6 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Sets IDE Device specific parameters to DPT.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; IdeDPT_Finalize
9; Parameters:
10; DS:DI: Ptr to Disk Parameter Table
11; ES:SI: Ptr to 512-byte ATA information read from the drive
12; CS:BP: Ptr to IDEVARS for the controller
13; Returns:
14; CF: Clear, IDE interface only supports hard disks
15; Corrupts registers:
16; AX, BX, CX, DX
17;--------------------------------------------------------------------
18IdeDPT_Finalize:
19
20;--------------------------------------------------------------------
21; .StoreBlockMode
22; Parameters:
23; DS:DI: Ptr to Disk Parameter Table
24; ES:SI: Ptr to 512-byte ATA information read from the drive
25; CS:BP: Ptr to IDEVARS for the controller
26; Returns:
27; Nothing
28; Corrupts registers:
29; AX
30;--------------------------------------------------------------------
31.StoreBlockMode:
32 mov al, 1 ; Block mode will be enabled on AH=9h
33 mov ah, [es:si+ATA1.bBlckSize] ; Max block size in sectors
34 mov [di+DPT_ATA.wSetAndMaxBlock], ax
35
36%ifdef MODULE_ADVANCED_ATA
37;--------------------------------------------------------------------
38; .StoreDeviceType
39; Parameters:
40; DS:DI: Ptr to Disk Parameter Table
41; ES:SI: Ptr to 512-byte ATA information read from the drive
42; CS:BP: Ptr to IDEVARS for the controller
43; Returns:
44; Nothing
45; Corrupts registers:
46; Nothing
47;--------------------------------------------------------------------
48.StoreDeviceType:
49 call IdeDPT_StoreDeviceTypeFromIdevarsInCSBPtoDPTinDSDI
50
51;--------------------------------------------------------------------
52; .StorePioModeAndTimings
53; Parameters:
54; DS:DI: Ptr to Disk Parameter Table
55; ES:SI: Ptr to 512-byte ATA information read from the drive
56; CS:BP: Ptr to IDEVARS for the controller
57; Returns:
58; Nothing
59; Corrupts registers:
60; AX, CX, DX
61;--------------------------------------------------------------------
62.StorePioMode:
63 call AtaID_GetMaxPioModeToAXandMinCycleTimeToDX
64 call AtaID_ConvertPioModeFromAXandMinCycleTimeFromDXtoActiveAndRecoveryTime
65 mov [di+DPT_ATA.bPioMode], al
66 mov [di+DPT_ADVANCED_ATA.wMinPioActiveTimeNs], cx
67 mov [di+DPT_ADVANCED_ATA.wMinPioRecoveryTimeNs], dx
68
69;--------------------------------------------------------------------
70; .DetectAdvancedIdeController
71; Parameters:
72; DS:DI: Ptr to Disk Parameter Table
73; ES:SI: Ptr to 512-byte ATA information read from the drive
74; CS:BP: Ptr to IDEVARS for the controller
75; Returns:
76; Nothing
77; Corrupts registers:
78; AX, BX, CX, DX
79;--------------------------------------------------------------------
80.DetectAdvancedIdeController:
81 mov dx, [cs:bp+IDEVARS.wPort]
82 mov [di+DPT_ADVANCED_ATA.wIdeBasePort], dx
83 call AdvAtaInit_DetectControllerForIdeBaseInDX
84 mov [di+DPT_ADVANCED_ATA.wControllerID], ax ; Store zero if none detected
85 mov [di+DPT_ADVANCED_ATA.wControllerBasePort], cx
86 jnc SHORT .NoAdvancedControllerDetected
87
88 ; Use highest common PIO mode from controller and drive.
89 ; Many VLB controllers support PIO modes up to 2.
90 call AdvAtaInit_GetControllerMaxPioModeToAL
91 jnc SHORT .ChangeTo32bitDevice
92 MIN_U [di+DPT_ATA.bPioMode], al
93
94 ; We have detected 32-bit controller so change Device Type since
95 ; it might have been set to 16-bit on IDEVARS
96.ChangeTo32bitDevice:
97 mov BYTE [di+DPT_ATA.bDevice], DEVICE_32BIT_ATA
98
99.NoAdvancedControllerDetected:
100
101%endif ; MODULE_ADVANCED_ATA
102
103;--------------------------------------------------------------------
104; IdeDPT_StoreReversedAddressLinesFlagIfNecessary
105; Parameters:
106; DS:DI: Ptr to Disk Parameter Table
107; CS:BP: Ptr to IDEVARS for the controller
108; Returns:
109; CF: Always clear
110; Corrupts registers:
111; Nothing
112;--------------------------------------------------------------------
113IdeDPT_StoreReversedAddressLinesFlagIfNecessary:
114 cmp BYTE [cs:bp+IDEVARS.bDevice], DEVICE_XTIDE_REV2
115 je SHORT .SetFlagForSwappedA0andA3
116 cmp BYTE [cs:bp+IDEVARS.bDevice], DEVICE_FAST_XTIDE
117 jne SHORT .EndDPT
118.SetFlagForSwappedA0andA3:
119 or BYTE [di+DPT.bFlagsHigh], FLGH_DPT_REVERSED_A0_AND_A3
120.EndDPT:
121 clc
122 ret
123
124
125%ifdef MODULE_ADVANCED_ATA
126;--------------------------------------------------------------------
127; IdeDPT_StoreDeviceTypeFromIdevarsInCSBPtoDPTinDSDI
128; Parameters:
129; DS:DI: Ptr to Disk Parameter Table
130; CS:BP: Ptr to IDEVARS for the controller
131; Returns:
132; Nothing
133; Corrupts registers:
134; AL
135;--------------------------------------------------------------------
136IdeDPT_StoreDeviceTypeFromIdevarsInCSBPtoDPTinDSDI:
137 mov al, [cs:bp+IDEVARS.bDevice]
138 mov [di+DPT_ATA.bDevice], al
139 ret
140%endif
Note: See TracBrowser for help on using the repository browser.