source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDPT.asm@ 584

Last change on this file since 584 was 582, checked in by krille_n_@…, 10 years ago

Changes:

  • Size optimizations to the QD Vision code.
File size: 5.0 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Sets IDE Device specific parameters to DPT.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; IdeDPT_Finalize
25; Parameters:
26; DS:DI: Ptr to Disk Parameter Table
27; ES:SI: Ptr to 512-byte ATA information read from the drive
28; CS:BP: Ptr to IDEVARS for the controller
29; Returns:
30; CF: Clear, IDE interface only supports hard disks
31; Corrupts registers:
32; AX, BX, CX, DX
33;--------------------------------------------------------------------
34IdeDPT_Finalize:
35
36%ifdef MODULE_POWER_MANAGEMENT
37;--------------------------------------------------------------------
38; .DetectPowerManagementSupport
39; Parameters:
40; DS:DI: Ptr to Disk Parameter Table
41; ES:SI: Ptr to 512-byte ATA information read from the drive
42; Returns:
43; Nothing
44; Corrupts registers:
45; AL
46;--------------------------------------------------------------------
47.DetectPowerManagementSupport:
48 mov al, [es:si+ATA6.wSetSup82]
49 and al, A6_wSetSup82_POWERMAN ; A6_wSetSup82_POWERMAN (bit 3) is the same
50 or [di+DPT.bFlagsHigh], al ; bit as FLGH_DPT_POWER_MANAGEMENT_SUPPORTED
51%endif ; MODULE_POWER_MANAGEMENT
52
53
54;--------------------------------------------------------------------
55; .StoreDeviceType
56; Parameters:
57; DS:DI: Ptr to Disk Parameter Table
58; CS:BP: Ptr to IDEVARS for the controller
59; Returns:
60; Nothing
61; Corrupts registers:
62; AL
63;--------------------------------------------------------------------
64.StoreDeviceType:
65 call IdeDPT_StoreDeviceTypeToDPTinDSDIfromIdevarsInCSBP
66
67
68;--------------------------------------------------------------------
69; .StoreBlockMode
70; Parameters:
71; DS:DI: Ptr to Disk Parameter Table
72; Returns:
73; Nothing
74; Corrupts registers:
75; Nothing
76;--------------------------------------------------------------------
77.StoreBlockMode:
78 mov BYTE [di+DPT_ATA.bBlockSize], 1
79
80
81%ifdef MODULE_ADVANCED_ATA
82;--------------------------------------------------------------------
83; .StorePioModeAndTimings
84; Parameters:
85; DS:DI: Ptr to Disk Parameter Table
86; ES:SI: Ptr to 512-byte ATA information read from the drive
87; CS:BP: Ptr to IDEVARS for the controller
88; Returns:
89; Nothing
90; Corrupts registers:
91; AX, BX, CX
92;--------------------------------------------------------------------
93.StorePioMode:
94 call AtaID_GetMaxPioModeToAXandMinCycleTimeToCX
95 mov [di+DPT_ADVANCED_ATA.wMinPioCycleTime], cx
96 mov [di+DPT_ADVANCED_ATA.bPioMode], al
97 or [di+DPT.bFlagsHigh], ah
98
99
100;--------------------------------------------------------------------
101; .DetectAdvancedIdeController
102; Parameters:
103; DS:DI: Ptr to Disk Parameter Table
104; ES:SI: Ptr to 512-byte ATA information read from the drive
105; CS:BP: Ptr to IDEVARS for the controller
106; Returns:
107; Nothing
108; Corrupts registers:
109; AX, BX, CX, DX
110;--------------------------------------------------------------------
111.DetectAdvancedIdeController:
112 mov bx, [di+DPT.wBasePort]
113 call AdvAtaInit_DetectControllerForIdeBaseInBX
114 mov [di+DPT_ADVANCED_ATA.wControllerID], ax ; Store zero if none detected
115 mov [di+DPT_ADVANCED_ATA.wControllerBasePort], dx
116 jnc SHORT .NoAdvancedControllerDetected
117
118 ; Use highest common PIO mode from controller and drive.
119 ; Many VLB controllers support PIO modes up to 2.
120 call AdvAtaInit_GetControllerMaxPioModeToALandMinPioCycleTimeToBX
121 jnz SHORT .ChangeTo32bitDevice
122
123 and BYTE [di+DPT.bFlagsHigh], ~FLGH_DPT_IORDY ; No IORDY supported if need to limit
124 MIN_U [di+DPT_ADVANCED_ATA.bPioMode], al
125 mov [di+DPT_ADVANCED_ATA.wMinPioCycleTime], bx
126
127 ; We have detected 32-bit controller so change Device Type since
128 ; it might have been set to 16-bit on IDEVARS
129.ChangeTo32bitDevice:
130 mov BYTE [di+DPT_ATA.bDevice], DEVICE_32BIT_ATA
131.NoAdvancedControllerDetected:
132%endif ; MODULE_ADVANCED_ATA
133
134
135; End DPT
136 clc
137 ret
138
139
140;--------------------------------------------------------------------
141; IdeDPT_StoreDeviceTypeToDPTinDSDIfromIdevarsInCSBP
142; Parameters:
143; DS:DI: Ptr to Disk Parameter Table
144; CS:BP: Ptr to IDEVARS for the controller
145; Returns:
146; Nothing
147; Corrupts registers:
148; AL
149;--------------------------------------------------------------------
150IdeDPT_StoreDeviceTypeToDPTinDSDIfromIdevarsInCSBP:
151 mov al, [cs:bp+IDEVARS.bDevice]
152 mov [di+DPT_ATA.bDevice], al
153 ret
Note: See TracBrowser for help on using the repository browser.