source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeDPT.asm@ 259

Last change on this file since 259 was 258, checked in by gregli@…, 13 years ago

Added floppy drive emulation over the serial connection (MODULE_SERIAL_FLOPPY). Along the way, various optimizations were made to stay within the 8K ROM size target. Also, serial code now returns the number of sectors transferred.

File size: 1.8 KB
RevLine 
[150]1; Project name : XTIDE Universal BIOS
2; Description : Sets IDE Device specific parameters to DPT.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; IdeDPT_Finalize
9; Parameters:
10; DS:DI: Ptr to Disk Parameter Table
11; ES:SI: Ptr to 512-byte ATA information read from the drive
[160]12; CS:BP: Ptr to IDEVARS for the controller
[150]13; Returns:
[258]14; CF: Clear, IDE interface only supports hard disks
[150]15; Corrupts registers:
[242]16; AX
[150]17;--------------------------------------------------------------------
18IdeDPT_Finalize:
19 ; Fall to .StoreBlockMode
20
21;--------------------------------------------------------------------
22; .StoreBlockMode
23; Parameters:
24; DS:DI: Ptr to Disk Parameter Table
25; ES:SI: Ptr to 512-byte ATA information read from the drive
[160]26; CS:BP: Ptr to IDEVARS for the controller
[150]27; Returns:
28; Nothing
29; Corrupts registers:
[242]30; AX
[150]31;--------------------------------------------------------------------
32.StoreBlockMode:
33 mov al, 1
34 mov ah, [es:si+ATA1.bBlckSize] ; Max block size in sectors
35 mov [di+DPT_ATA.wSetAndMaxBlock], ax
[160]36 ; Fall to IdeDPT_StoreReversedAddressLinesFlagIfNecessary
[150]37
[160]38;--------------------------------------------------------------------
39; IdeDPT_StoreReversedAddressLinesFlagIfNecessary
40; Parameters:
41; DS:DI: Ptr to Disk Parameter Table
42; CS:BP: Ptr to IDEVARS for the controller
43; Returns:
[258]44; CF: Always clear, we don't support floppies on the IDE inteface
[160]45; Corrupts registers:
46; Nothing
47;--------------------------------------------------------------------
48IdeDPT_StoreReversedAddressLinesFlagIfNecessary:
49 cmp BYTE [cs:bp+IDEVARS.bDevice], DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
50 jne SHORT .EndDPT
51 or BYTE [di+DPT.bFlagsHigh], FLGH_DPT_REVERSED_A0_AND_A3
[150]52
53.EndDPT:
[258]54 clc
[150]55 ret
Note: See TracBrowser for help on using the repository browser.