source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeCommand.asm @ 437

Last change on this file since 437 was 437, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Changed Fast XTIDE to Lo-tech XT-CF
  • 8-bit PIO Transfer mode is enabled for Lo-tech XT-CF
File size: 8.3 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   IDE Device Command functions.
3
4;
5; XTIDE Universal BIOS and Associated Tools 
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12; 
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html               
18;       
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; IdeCommand_ResetMasterAndSlaveController
25;   Parameters:
26;       DS:DI:  Ptr to DPT (in RAMVARS segment)
27;   Returns:
28;       AH:     INT 13h Error Code
29;       CF:     Cleared if success, Set if error
30;   Corrupts registers:
31;       AL, BX, CX, DX
32;--------------------------------------------------------------------
33IdeCommand_ResetMasterAndSlaveController:
34    ; HSR0: Set_SRST
35    call    AccessDPT_GetDeviceControlByteToAL
36    or      al, FLG_DEVCONTROL_SRST | FLG_DEVCONTROL_nIEN   ; Set Reset bit
37    OUTPUT_AL_TO_IDE_CONTROL_BLOCK_REGISTER     DEVICE_CONTROL_REGISTER_out
38    mov     ax, HSR0_RESET_WAIT_US
39    call    Timer_DelayMicrosecondsFromAX
40
41    ; HSR1: Clear_wait
42    call    AccessDPT_GetDeviceControlByteToAL
43    or      al, FLG_DEVCONTROL_nIEN
44    and     al, ~FLG_DEVCONTROL_SRST                        ; Clear reset bit
45    OUTPUT_AL_TO_IDE_CONTROL_BLOCK_REGISTER     DEVICE_CONTROL_REGISTER_out
46    mov     ax, HSR1_RESET_WAIT_US
47    call    Timer_DelayMicrosecondsFromAX
48
49    ; HSR2: Check_status
50    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_MAXIMUM, FLG_STATUS_BSY)
51    jmp     IdeWait_PollStatusFlagInBLwithTimeoutInBH
52
53
54;--------------------------------------------------------------------
55; IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
56;   Parameters:
57;       BH:     Drive Select byte for Drive and Head Select Register
58;       DS:     Segment to RAMVARS
59;       ES:SI:  Ptr to buffer to receive 512-byte IDE Information
60;       CS:BP:  Ptr to IDEVARS
61;   Returns:
62;       AH:     INT 13h Error Code
63;       CF:     Cleared if success, Set if error
64;   Corrupts registers:
65;       AL, BL, CX, DX, SI, DI, ES
66;--------------------------------------------------------------------
67IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH:
68    ; Create fake DPT to be able to use Device.asm functions
69    call    FindDPT_ForNewDriveToDSDI
70    eMOVZX  ax, bh
71    mov     [di+DPT.wFlags], ax
72    mov     [di+DPT.bIdevarsOffset], bp
73    mov     BYTE [di+DPT_ATA.bBlockSize], 1 ; Block = 1 sector
74    call    IdeDPT_StoreDeviceTypeFromIdevarsInCSBPtoDPTinDSDI
75
76    ; Wait until drive motors have reached max speed
77    cmp     bp, BYTE ROMVARS.ideVars0
78    jne     SHORT .SkipLongWaitSinceDriveIsNotPrimaryMaster
79    test    bh, FLG_DRVNHEAD_DRV
80    jnz     SHORT .SkipLongWaitSinceDriveIsNotPrimaryMaster
81    call    AHDh_WaitUnilDriveMotorHasReachedFullSpeed
82.SkipLongWaitSinceDriveIsNotPrimaryMaster:
83
84    ; Create IDEPACK without INTPACK
85    push    bp
86    call    Idepack_FakeToSSBP
87
88    ; Enable 8-bit PIO mode for Lo-tech XT-CF
89    call    AH9h_Enable8bitPioModeForXTCF
90
91    ; Prepare to output Identify Device command
92    mov     dl, 1                       ; Sector count (required by IdeTransfer.asm)
93    mov     al, COMMAND_IDENTIFY_DEVICE
94    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRQ)
95    call    Idepack_StoreNonExtParametersAndIssueCommandFromAL
96
97    ; Clean stack and return
98    lea     sp, [bp+EXTRA_BYTES_FOR_INTPACK]    ; This assumes BP hasn't changed between Idepack_FakeToSSBP and here
99    pop     bp
100    ret
101
102
103;--------------------------------------------------------------------
104; IdeCommand_OutputWithParameters
105;   Parameters:
106;       BH:     System timer ticks for timeout
107;       BL:     IDE Status Register bit to poll after command
108;       ES:SI:  Ptr to buffer (for data transfer commands)
109;       DS:DI:  Ptr to DPT (in RAMVARS segment)
110;       SS:BP:  Ptr to IDEPACK
111;   Returns:
112;       AH:     INT 13h Error Code
113;       CX:     Number of successfully transferred sectors (for transfer commands)
114;       CF:     Cleared if success, Set if error
115;   Corrupts registers:
116;       AL, BX, (CX), DX, (ES:SI for data transfer commands)
117;--------------------------------------------------------------------
118ALIGN JUMP_ALIGN
119IdeCommand_OutputWithParameters:
120    push    bx                      ; Store status register bits to poll
121
122    ; Select Master or Slave drive and output head number or LBA28 top bits
123    call    IdeCommand_SelectDrive
124    jc      SHORT .DriveNotReady
125
126    ; Output Device Control Byte to enable or disable interrupts
127    mov     al, [bp+IDEPACK.bDeviceControl]
128%ifdef MODULE_IRQ
129    test    al, FLG_DEVCONTROL_nIEN ; Interrupts disabled?
130    jnz     SHORT .DoNotSetInterruptInServiceFlag
131
132    ; Clear Task Flag and set Interrupt In-Service Flag
133    or      BYTE [di+DPT.bFlagsHigh], FLGH_DPT_INTERRUPT_IN_SERVICE
134    push    ds
135    LOAD_BDA_SEGMENT_TO ds, dx, !   ; Also zero DX
136    mov     [BDA.bHDTaskFlg], dl
137    pop     ds
138.DoNotSetInterruptInServiceFlag:
139%endif
140    OUTPUT_AL_TO_IDE_CONTROL_BLOCK_REGISTER     DEVICE_CONTROL_REGISTER_out
141
142    ; Output Feature Number
143    mov     al, [bp+IDEPACK.bFeatures]
144    OUTPUT_AL_TO_IDE_REGISTER   FEATURES_REGISTER_out
145
146    ; Output Sector Address High (only used by LBA48)
147%ifdef MODULE_EBIOS
148    eMOVZX  ax, [bp+IDEPACK.bLbaLowExt]     ; Zero sector count
149    mov     cx, [bp+IDEPACK.wLbaMiddleAndHighExt]
150    call    OutputSectorCountAndAddress
151%endif
152
153    ; Output Sector Address Low
154    mov     ax, [bp+IDEPACK.wSectorCountAndLbaLow]
155    mov     cx, [bp+IDEPACK.wLbaMiddleAndHigh]
156    call    OutputSectorCountAndAddress
157
158    ; Output command
159    mov     al, [bp+IDEPACK.bCommand]
160    OUTPUT_AL_TO_IDE_REGISTER   COMMAND_REGISTER_out
161
162    ; Wait until command completed
163    pop     bx                              ; Pop status and timeout for polling
164    cmp     bl, FLG_STATUS_DRQ              ; Data transfer started?
165    jne     SHORT .WaitUntilNonTransferCommandCompletes
166%ifdef MODULE_JRIDE
167    cmp     BYTE [di+DPT_ATA.bDevice], DEVICE_8BIT_JRIDE_ISA
168    je      SHORT JrIdeTransfer_StartWithCommandInAL
169%endif
170    jmp     IdeTransfer_StartWithCommandInAL
171
172.WaitUntilNonTransferCommandCompletes:
173%ifdef MODULE_IRQ
174    test    BYTE [bp+IDEPACK.bDeviceControl], FLG_DEVCONTROL_nIEN
175    jz      SHORT .PollStatusFlagInsteadOfWaitIrq
176    jmp     IdeWait_IRQorStatusFlagInBLwithTimeoutInBH
177.PollStatusFlagInsteadOfWaitIrq:
178%endif
179    jmp     IdeWait_PollStatusFlagInBLwithTimeoutInBH
180
181.DriveNotReady:
182    pop     bx                          ; Clean stack
183    ret
184
185
186;--------------------------------------------------------------------
187; IdeCommand_SelectDrive
188;   Parameters:
189;       DS:DI:  Ptr to DPT (in RAMVARS segment)
190;       SS:BP:  Ptr to IDEPACK
191;   Returns:
192;       AH:     INT 13h Error Code
193;       CF:     Cleared if success, Set if error
194;   Corrupts registers:
195;       AL, BX, CX, DX
196;--------------------------------------------------------------------
197ALIGN JUMP_ALIGN
198IdeCommand_SelectDrive:
199%if 0
200    ; Wait until neither Master or Slave Drive is busy
201    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
202    cmp     BYTE [bp+IDEPACK.bCommand], COMMAND_IDENTIFY_DEVICE
203    eCMOVE  bh, TIMEOUT_IDENTIFY_DEVICE
204    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
205%endif
206
207    ; Select Master or Slave Drive
208    mov     al, [bp+IDEPACK.bDrvAndHead]
209    OUTPUT_AL_TO_IDE_REGISTER   DRIVE_AND_HEAD_SELECT_REGISTER
210    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRDY, FLG_STATUS_DRDY)
211    cmp     BYTE [bp+IDEPACK.bCommand], COMMAND_IDENTIFY_DEVICE
212    eCMOVE  bh, TIMEOUT_IDENTIFY_DEVICE
213    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
214
215    ; Ignore errors from IDE Error Register (set by previous command)
216    cmp     ah, RET_HD_TIMEOUT
217    je      SHORT .FailedToSelectDrive
218    xor     ax, ax                  ; Always success unless timeout
219    ret
220.FailedToSelectDrive:
221    stc
222    ret
223
224
225;--------------------------------------------------------------------
226; OutputSectorCountAndAddress
227;   Parameters:
228;       AH:     LBA low bits (Sector Number)
229;       AL:     Sector Count
230;       CL:     LBA middle bits (Cylinder Number low)
231;       CH:     LBA high bits (Cylinder Number high)
232;       DS:DI:  Ptr to DPT (in RAMVARS segment)
233;   Returns:
234;       Nothing
235;   Corrupts registers:
236;       AL, BX, DX
237;--------------------------------------------------------------------
238ALIGN JUMP_ALIGN
239OutputSectorCountAndAddress:
240    OUTPUT_AL_TO_IDE_REGISTER   SECTOR_COUNT_REGISTER
241
242    mov     al, ah
243    OUTPUT_AL_TO_IDE_REGISTER   LBA_LOW_REGISTER
244
245    mov     al, cl
246    OUTPUT_AL_TO_IDE_REGISTER   LBA_MIDDLE_REGISTER
247
248    mov     al, ch
249    JUMP_TO_OUTPUT_AL_TO_IDE_REGISTER   LBA_HIGH_REGISTER
Note: See TracBrowser for help on using the repository browser.