source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeCommand.asm @ 428

Last change on this file since 428 was 428, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Motor spin up is now waited when resetting drive.
  • Optimized boot sector loading a bit.
File size: 8.2 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   IDE Device Command functions.
3
4;
5; XTIDE Universal BIOS and Associated Tools 
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12; 
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html               
18;       
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; IdeCommand_ResetMasterAndSlaveController
25;   Parameters:
26;       DS:DI:  Ptr to DPT (in RAMVARS segment)
27;   Returns:
28;       AH:     INT 13h Error Code
29;       CF:     Cleared if success, Set if error
30;   Corrupts registers:
31;       AL, BX, CX, DX
32;--------------------------------------------------------------------
33IdeCommand_ResetMasterAndSlaveController:
34    ; HSR0: Set_SRST
35    call    AccessDPT_GetDeviceControlByteToAL
36    or      al, FLG_DEVCONTROL_SRST | FLG_DEVCONTROL_nIEN   ; Set Reset bit
37    OUTPUT_AL_TO_IDE_CONTROL_BLOCK_REGISTER     DEVICE_CONTROL_REGISTER_out
38    mov     ax, HSR0_RESET_WAIT_US
39    call    Timer_DelayMicrosecondsFromAX
40
41    ; HSR1: Clear_wait
42    call    AccessDPT_GetDeviceControlByteToAL
43    or      al, FLG_DEVCONTROL_nIEN
44    and     al, ~FLG_DEVCONTROL_SRST                        ; Clear reset bit
45    OUTPUT_AL_TO_IDE_CONTROL_BLOCK_REGISTER     DEVICE_CONTROL_REGISTER_out
46    mov     ax, HSR1_RESET_WAIT_US
47    call    Timer_DelayMicrosecondsFromAX
48
49    ; HSR2: Check_status
50    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_MOTOR_STARTUP, FLG_STATUS_BSY)
51    jmp     IdeWait_PollStatusFlagInBLwithTimeoutInBH
52
53
54;--------------------------------------------------------------------
55; IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
56;   Parameters:
57;       BH:     Drive Select byte for Drive and Head Select Register
58;       DS:     Segment to RAMVARS
59;       ES:SI:  Ptr to buffer to receive 512-byte IDE Information
60;       CS:BP:  Ptr to IDEVARS
61;   Returns:
62;       AH:     INT 13h Error Code
63;       CF:     Cleared if success, Set if error
64;   Corrupts registers:
65;       AL, BL, CX, DX, SI, DI, ES
66;--------------------------------------------------------------------
67IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH:
68    ; Create fake DPT to be able to use Device.asm functions
69    call    FindDPT_ForNewDriveToDSDI
70    eMOVZX  ax, bh
71    mov     [di+DPT.wFlags], ax
72    mov     [di+DPT.bIdevarsOffset], bp
73    mov     BYTE [di+DPT_ATA.bBlockSize], 1 ; Block = 1 sector
74    call    IdeDPT_StoreDeviceTypeFromIdevarsInCSBPtoDPTinDSDI
75
76    ; Wait until drive motors have reached max speed
77    cmp     bp, BYTE ROMVARS.ideVars0
78    jne     SHORT .SkipLongWaitSinceDriveIsNotPrimaryMaster
79    test    bh, FLG_DRVNHEAD_DRV
80    jnz     SHORT .SkipLongWaitSinceDriveIsNotPrimaryMaster
81    call    AHDh_WaitUnilDriveMotorHasReachedFullSpeed
82.SkipLongWaitSinceDriveIsNotPrimaryMaster:
83
84    ; Create IDEPACK without INTPACK
85    push    bp
86    call    Idepack_FakeToSSBP
87
88    ; Prepare to output Identify Device command
89    mov     dl, 1                       ; Sector count (required by IdeTransfer.asm)
90    mov     al, COMMAND_IDENTIFY_DEVICE
91    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRQ, FLG_STATUS_DRQ)
92    call    Idepack_StoreNonExtParametersAndIssueCommandFromAL
93
94    ; Clean stack and return
95    lea     sp, [bp+EXTRA_BYTES_FOR_INTPACK]    ; This assumes BP hasn't changed between Idepack_FakeToSSBP and here
96    pop     bp
97    ret
98
99
100;--------------------------------------------------------------------
101; IdeCommand_OutputWithParameters
102;   Parameters:
103;       BH:     System timer ticks for timeout
104;       BL:     IDE Status Register bit to poll after command
105;       ES:SI:  Ptr to buffer (for data transfer commands)
106;       DS:DI:  Ptr to DPT (in RAMVARS segment)
107;       SS:BP:  Ptr to IDEPACK
108;   Returns:
109;       AH:     INT 13h Error Code
110;       CX:     Number of successfully transferred sectors (for transfer commands)
111;       CF:     Cleared if success, Set if error
112;   Corrupts registers:
113;       AL, BX, (CX), DX, (ES:SI for data transfer commands)
114;--------------------------------------------------------------------
115ALIGN JUMP_ALIGN
116IdeCommand_OutputWithParameters:
117    push    bx                      ; Store status register bits to poll
118
119    ; Select Master or Slave drive and output head number or LBA28 top bits
120    call    IdeCommand_SelectDrive
121    jc      SHORT .DriveNotReady
122
123    ; Output Device Control Byte to enable or disable interrupts
124    mov     al, [bp+IDEPACK.bDeviceControl]
125%ifdef MODULE_IRQ
126    test    al, FLG_DEVCONTROL_nIEN ; Interrupts disabled?
127    jnz     SHORT .DoNotSetInterruptInServiceFlag
128
129    ; Clear Task Flag and set Interrupt In-Service Flag
130    or      BYTE [di+DPT.bFlagsHigh], FLGH_DPT_INTERRUPT_IN_SERVICE
131    push    ds
132    LOAD_BDA_SEGMENT_TO ds, dx, !   ; Also zero DX
133    mov     [BDA.bHDTaskFlg], dl
134    pop     ds
135.DoNotSetInterruptInServiceFlag:
136%endif
137    OUTPUT_AL_TO_IDE_CONTROL_BLOCK_REGISTER     DEVICE_CONTROL_REGISTER_out
138
139    ; Output Feature Number
140    mov     al, [bp+IDEPACK.bFeatures]
141    OUTPUT_AL_TO_IDE_REGISTER   FEATURES_REGISTER_out
142
143    ; Output Sector Address High (only used by LBA48)
144%ifdef MODULE_EBIOS
145    eMOVZX  ax, [bp+IDEPACK.bLbaLowExt]     ; Zero sector count
146    mov     cx, [bp+IDEPACK.wLbaMiddleAndHighExt]
147    call    OutputSectorCountAndAddress
148%endif
149
150    ; Output Sector Address Low
151    mov     ax, [bp+IDEPACK.wSectorCountAndLbaLow]
152    mov     cx, [bp+IDEPACK.wLbaMiddleAndHigh]
153    call    OutputSectorCountAndAddress
154
155    ; Output command
156    mov     al, [bp+IDEPACK.bCommand]
157    OUTPUT_AL_TO_IDE_REGISTER   COMMAND_REGISTER_out
158
159    ; Wait until command completed
160    pop     bx                              ; Pop status and timeout for polling
161    cmp     bl, FLG_STATUS_DRQ              ; Data transfer started?
162    jne     SHORT .WaitUntilNonTransferCommandCompletes
163%ifdef MODULE_JRIDE
164    cmp     BYTE [di+DPT_ATA.bDevice], DEVICE_8BIT_JRIDE_ISA
165    je      SHORT JrIdeTransfer_StartWithCommandInAL
166%endif
167    jmp     IdeTransfer_StartWithCommandInAL
168
169.WaitUntilNonTransferCommandCompletes:
170%ifdef MODULE_IRQ
171    test    BYTE [bp+IDEPACK.bDeviceControl], FLG_DEVCONTROL_nIEN
172    jz      SHORT .PollStatusFlagInsteadOfWaitIrq
173    jmp     IdeWait_IRQorStatusFlagInBLwithTimeoutInBH
174.PollStatusFlagInsteadOfWaitIrq:
175%endif
176    jmp     IdeWait_PollStatusFlagInBLwithTimeoutInBH
177
178.DriveNotReady:
179    pop     bx                          ; Clean stack
180    ret
181
182
183;--------------------------------------------------------------------
184; IdeCommand_SelectDrive
185;   Parameters:
186;       DS:DI:  Ptr to DPT (in RAMVARS segment)
187;       SS:BP:  Ptr to IDEPACK
188;   Returns:
189;       AH:     INT 13h Error Code
190;       CF:     Cleared if success, Set if error
191;   Corrupts registers:
192;       AL, BX, CX, DX
193;--------------------------------------------------------------------
194ALIGN JUMP_ALIGN
195IdeCommand_SelectDrive:
196%if 0
197    ; Wait until neither Master or Slave Drive is busy
198    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
199    cmp     BYTE [bp+IDEPACK.bCommand], COMMAND_IDENTIFY_DEVICE
200    eCMOVE  bh, TIMEOUT_IDENTIFY_DEVICE
201    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
202%endif
203
204    ; Select Master or Slave Drive
205    mov     al, [bp+IDEPACK.bDrvAndHead]
206    OUTPUT_AL_TO_IDE_REGISTER   DRIVE_AND_HEAD_SELECT_REGISTER
207    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRDY, FLG_STATUS_DRDY)
208    cmp     BYTE [bp+IDEPACK.bCommand], COMMAND_IDENTIFY_DEVICE
209    eCMOVE  bh, TIMEOUT_IDENTIFY_DEVICE
210    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
211
212    ; Ignore errors from IDE Error Register (set by previous command)
213    cmp     ah, RET_HD_TIMEOUT
214    je      SHORT .FailedToSelectDrive
215    xor     ax, ax                  ; Always success unless timeout
216    ret
217.FailedToSelectDrive:
218    stc
219    ret
220
221
222;--------------------------------------------------------------------
223; OutputSectorCountAndAddress
224;   Parameters:
225;       AH:     LBA low bits (Sector Number)
226;       AL:     Sector Count
227;       CL:     LBA middle bits (Cylinder Number low)
228;       CH:     LBA high bits (Cylinder Number high)
229;       DS:DI:  Ptr to DPT (in RAMVARS segment)
230;   Returns:
231;       Nothing
232;   Corrupts registers:
233;       AL, BX, DX
234;--------------------------------------------------------------------
235ALIGN JUMP_ALIGN
236OutputSectorCountAndAddress:
237    OUTPUT_AL_TO_IDE_REGISTER   SECTOR_COUNT_REGISTER
238
239    mov     al, ah
240    OUTPUT_AL_TO_IDE_REGISTER   LBA_LOW_REGISTER
241
242    mov     al, cl
243    OUTPUT_AL_TO_IDE_REGISTER   LBA_MIDDLE_REGISTER
244
245    mov     al, ch
246    JUMP_TO_OUTPUT_AL_TO_IDE_REGISTER   LBA_HIGH_REGISTER
Note: See TracBrowser for help on using the repository browser.