source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/IDE/IdeCommand.asm @ 408

Last change on this file since 408 was 408, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Restored polling BSY before selecting drive since 4GB Magicstor microdrive seems to require it.
File size: 8.3 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   IDE Device Command functions.
3
4;
5; XTIDE Universal BIOS and Associated Tools 
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12; 
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html               
18;       
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; IdeCommand_ResetMasterAndSlaveController
25;   Parameters:
26;       DS:DI:  Ptr to DPT (in RAMVARS segment)
27;   Returns:
28;       AH:     INT 13h Error Code
29;       CF:     Cleared if success, Set if error
30;   Corrupts registers:
31;       AL, BX, CX, DX
32;--------------------------------------------------------------------
33IdeCommand_ResetMasterAndSlaveController:
34    ; HSR0: Set_SRST
35    call    AccessDPT_GetDeviceControlByteToAL
36    or      al, FLG_DEVCONTROL_SRST | FLG_DEVCONTROL_nIEN   ; Set Reset bit
37    OUTPUT_AL_TO_IDE_CONTROL_BLOCK_REGISTER     DEVICE_CONTROL_REGISTER_out
38    mov     ax, HSR0_RESET_WAIT_US
39    call    Timer_DelayMicrosecondsFromAX
40
41    ; HSR1: Clear_wait
42    call    AccessDPT_GetDeviceControlByteToAL
43    or      al, FLG_DEVCONTROL_nIEN
44    and     al, ~FLG_DEVCONTROL_SRST                        ; Clear reset bit
45    OUTPUT_AL_TO_IDE_CONTROL_BLOCK_REGISTER     DEVICE_CONTROL_REGISTER_out
46    mov     ax, HSR1_RESET_WAIT_US
47    call    Timer_DelayMicrosecondsFromAX
48
49    ; HSR2: Check_status
50    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_MOTOR_STARTUP, FLG_STATUS_BSY)
51    jmp     IdeWait_PollStatusFlagInBLwithTimeoutInBH
52
53
54;--------------------------------------------------------------------
55; IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
56;   Parameters:
57;       BH:     Drive Select byte for Drive and Head Select Register
58;       DS:     Segment to RAMVARS
59;       ES:SI:  Ptr to buffer to receive 512-byte IDE Information
60;       CS:BP:  Ptr to IDEVARS
61;   Returns:
62;       AH:     INT 13h Error Code
63;       CF:     Cleared if success, Set if error
64;   Corrupts registers:
65;       AL, BL, CX, DX, SI, DI, ES
66;--------------------------------------------------------------------
67IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH:
68    ; Create fake DPT to be able to use Device.asm functions
69    call    FindDPT_ForNewDriveToDSDI
70    eMOVZX  ax, bh
71    mov     [di+DPT.wFlags], ax
72    mov     [di+DPT.bIdevarsOffset], bp
73    mov     BYTE [di+DPT_ATA.bBlockSize], 1 ; Block = 1 sector
74    call    IdeDPT_StoreDeviceTypeFromIdevarsInCSBPtoDPTinDSDI
75
76    ; Wait until drive motors have reached max speed
77    cmp     bp, BYTE ROMVARS.ideVars0
78    jne     SHORT .SkipLongWaitSinceDriveIsNotPrimaryMaster
79    test    bh, FLG_DRVNHEAD_DRV
80    jnz     SHORT .SkipLongWaitSinceDriveIsNotPrimaryMaster
81    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_MOTOR_STARTUP, FLG_STATUS_BSY)
82    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
83.SkipLongWaitSinceDriveIsNotPrimaryMaster:
84
85    ; Create IDEPACK without INTPACK
86    push    bp
87    call    Idepack_FakeToSSBP
88
89    ; Prepare to output Identify Device command
90    mov     dl, 1                       ; Sector count (required by IdeTransfer.asm)
91    mov     al, COMMAND_IDENTIFY_DEVICE
92    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_IDENTIFY_DEVICE, FLG_STATUS_DRQ)
93    call    Idepack_StoreNonExtParametersAndIssueCommandFromAL
94
95    ; Clean stack and return
96    lea     sp, [bp+EXTRA_BYTES_FOR_INTPACK]    ; This assumes BP hasn't changed between Idepack_FakeToSSBP and here
97    pop     bp
98    ret
99
100
101;--------------------------------------------------------------------
102; IdeCommand_OutputWithParameters
103;   Parameters:
104;       BH:     System timer ticks for timeout
105;       BL:     IDE Status Register bit to poll after command
106;       ES:SI:  Ptr to buffer (for data transfer commands)
107;       DS:DI:  Ptr to DPT (in RAMVARS segment)
108;       SS:BP:  Ptr to IDEPACK
109;   Returns:
110;       AH:     INT 13h Error Code
111;       CX:     Number of successfully transferred sectors (for transfer commands)
112;       CF:     Cleared if success, Set if error
113;   Corrupts registers:
114;       AL, BX, (CX), DX, (ES:SI for data transfer commands)
115;--------------------------------------------------------------------
116ALIGN JUMP_ALIGN
117IdeCommand_OutputWithParameters:
118    push    bx                      ; Store status register bits to poll
119
120    ; Select Master or Slave drive and output head number or LBA28 top bits
121    call    IdeCommand_SelectDrive
122    jc      SHORT .DriveNotReady
123
124    ; Output Device Control Byte to enable or disable interrupts
125    mov     al, [bp+IDEPACK.bDeviceControl]
126%ifdef MODULE_IRQ
127    test    al, FLG_DEVCONTROL_nIEN ; Interrupts disabled?
128    jnz     SHORT .DoNotSetInterruptInServiceFlag
129
130    ; Clear Task Flag and set Interrupt In-Service Flag
131    or      BYTE [di+DPT.bFlagsHigh], FLGH_DPT_INTERRUPT_IN_SERVICE
132    push    ds
133    LOAD_BDA_SEGMENT_TO ds, dx, !   ; Also zero DX
134    mov     [BDA.bHDTaskFlg], dl
135    pop     ds
136.DoNotSetInterruptInServiceFlag:
137%endif
138    OUTPUT_AL_TO_IDE_CONTROL_BLOCK_REGISTER     DEVICE_CONTROL_REGISTER_out
139
140    ; Output Feature Number
141    mov     al, [bp+IDEPACK.bFeatures]
142    OUTPUT_AL_TO_IDE_REGISTER   FEATURES_REGISTER_out
143
144    ; Output Sector Address High (only used by LBA48)
145%ifdef MODULE_EBIOS
146    eMOVZX  ax, [bp+IDEPACK.bLbaLowExt]     ; Zero sector count
147    mov     cx, [bp+IDEPACK.wLbaMiddleAndHighExt]
148    call    OutputSectorCountAndAddress
149%endif
150
151    ; Output Sector Address Low
152    mov     ax, [bp+IDEPACK.wSectorCountAndLbaLow]
153    mov     cx, [bp+IDEPACK.wLbaMiddleAndHigh]
154    call    OutputSectorCountAndAddress
155
156    ; Output command
157    mov     al, [bp+IDEPACK.bCommand]
158    OUTPUT_AL_TO_IDE_REGISTER   COMMAND_REGISTER_out
159
160    ; Wait until command completed
161    pop     bx                              ; Pop status and timeout for polling
162    cmp     bl, FLG_STATUS_DRQ              ; Data transfer started?
163    jne     SHORT .WaitUntilNonTransferCommandCompletes
164%ifdef MODULE_JRIDE
165    cmp     BYTE [di+DPT_ATA.bDevice], DEVICE_8BIT_JRIDE_ISA
166    je      SHORT JrIdeTransfer_StartWithCommandInAL
167%endif
168    jmp     IdeTransfer_StartWithCommandInAL
169
170.WaitUntilNonTransferCommandCompletes:
171%ifdef MODULE_IRQ
172    test    BYTE [bp+IDEPACK.bDeviceControl], FLG_DEVCONTROL_nIEN
173    jz      SHORT .PollStatusFlagInsteadOfWaitIrq
174    jmp     IdeWait_IRQorStatusFlagInBLwithTimeoutInBH
175.PollStatusFlagInsteadOfWaitIrq:
176%endif
177    jmp     IdeWait_PollStatusFlagInBLwithTimeoutInBH
178
179.DriveNotReady:
180    pop     bx                          ; Clean stack
181    ret
182
183
184;--------------------------------------------------------------------
185; IdeCommand_SelectDrive
186;   Parameters:
187;       DS:DI:  Ptr to DPT (in RAMVARS segment)
188;       SS:BP:  Ptr to IDEPACK
189;   Returns:
190;       AH:     INT 13h Error Code
191;       CF:     Cleared if success, Set if error
192;   Corrupts registers:
193;       AL, BX, CX, DX
194;--------------------------------------------------------------------
195ALIGN JUMP_ALIGN
196IdeCommand_SelectDrive:
197    ; Wait until neither Master or Slave Drive is busy
198    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
199    cmp     BYTE [bp+IDEPACK.bCommand], COMMAND_IDENTIFY_DEVICE
200    eCMOVE  bh, TIMEOUT_IDENTIFY_DEVICE
201    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
202
203    ; Select Master or Slave Drive
204    mov     al, [bp+IDEPACK.bDrvAndHead]
205    OUTPUT_AL_TO_IDE_REGISTER   DRIVE_AND_HEAD_SELECT_REGISTER
206    mov     bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRDY, FLG_STATUS_DRDY)
207    cmp     BYTE [bp+IDEPACK.bCommand], COMMAND_IDENTIFY_DEVICE
208    eCMOVE  bh, TIMEOUT_IDENTIFY_DEVICE
209    call    IdeWait_PollStatusFlagInBLwithTimeoutInBH
210
211    ; Ignore errors from IDE Error Register (set by previous command)
212    cmp     ah, RET_HD_TIMEOUT
213    je      SHORT .FailedToSelectDrive
214    xor     ax, ax                  ; Always success unless timeout
215    ret
216.FailedToSelectDrive:
217    stc
218    ret
219
220
221;--------------------------------------------------------------------
222; OutputSectorCountAndAddress
223;   Parameters:
224;       AH:     LBA low bits (Sector Number)
225;       AL:     Sector Count
226;       CL:     LBA middle bits (Cylinder Number low)
227;       CH:     LBA high bits (Cylinder Number high)
228;       DS:DI:  Ptr to DPT (in RAMVARS segment)
229;   Returns:
230;       Nothing
231;   Corrupts registers:
232;       AL, BX, DX
233;--------------------------------------------------------------------
234ALIGN JUMP_ALIGN
235OutputSectorCountAndAddress:
236    OUTPUT_AL_TO_IDE_REGISTER   SECTOR_COUNT_REGISTER
237
238    mov     al, ah
239    OUTPUT_AL_TO_IDE_REGISTER   LBA_LOW_REGISTER
240
241    mov     al, cl
242    OUTPUT_AL_TO_IDE_REGISTER   LBA_MIDDLE_REGISTER
243
244    mov     al, ch
245    JUMP_TO_OUTPUT_AL_TO_IDE_REGISTER   LBA_HIGH_REGISTER
Note: See TracBrowser for help on using the repository browser.