| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : IDE Device Command functions.
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing code
|
|---|
| 5 | SECTION .text
|
|---|
| 6 |
|
|---|
| 7 | ;--------------------------------------------------------------------
|
|---|
| 8 | ; IdeCommand_ResetMasterAndSlaveController
|
|---|
| 9 | ; Parameters:
|
|---|
| 10 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 11 | ; Returns:
|
|---|
| 12 | ; AH: INT 13h Error Code
|
|---|
| 13 | ; CF: Cleared if success, Set if error
|
|---|
| 14 | ; Corrupts registers:
|
|---|
| 15 | ; AL, BX, CX, DX
|
|---|
| 16 | ;--------------------------------------------------------------------
|
|---|
| 17 | IdeCommand_ResetMasterAndSlaveController:
|
|---|
| 18 | ; HSR0: Set_SRST
|
|---|
| 19 | call AccessDPT_GetDeviceControlByteToAL
|
|---|
| 20 | or al, FLG_DEVCONTROL_SRST | FLG_DEVCONTROL_nIEN ; Set Reset bit
|
|---|
| 21 | mov dl, DEVICE_CONTROL_REGISTER_out
|
|---|
| 22 | call Device_OutputALtoIdeControlBlockRegisterInDL
|
|---|
| 23 | mov ax, HSR0_RESET_WAIT_US
|
|---|
| 24 | call Timer_DelayMicrosecondsFromAX
|
|---|
| 25 |
|
|---|
| 26 | ; HSR1: Clear_wait
|
|---|
| 27 | call AccessDPT_GetDeviceControlByteToAL
|
|---|
| 28 | or al, FLG_DEVCONTROL_nIEN
|
|---|
| 29 | and al, ~FLG_DEVCONTROL_SRST ; Clear reset bit
|
|---|
| 30 | mov dl, DEVICE_CONTROL_REGISTER_out
|
|---|
| 31 | call Device_OutputALtoIdeControlBlockRegisterInDL
|
|---|
| 32 | mov ax, HSR1_RESET_WAIT_US
|
|---|
| 33 | call Timer_DelayMicrosecondsFromAX
|
|---|
| 34 |
|
|---|
| 35 | ; HSR2: Check_status
|
|---|
| 36 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_MOTOR_STARTUP, FLG_STATUS_BSY)
|
|---|
| 37 | jmp IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 38 |
|
|---|
| 39 |
|
|---|
| 40 | ;--------------------------------------------------------------------
|
|---|
| 41 | ; IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
|
|---|
| 42 | ; Parameters:
|
|---|
| 43 | ; BH: Drive Select byte for Drive and Head Select Register
|
|---|
| 44 | ; DS: Segment to RAMVARS
|
|---|
| 45 | ; ES:SI: Ptr to buffer to receive 512-byte IDE Information
|
|---|
| 46 | ; CS:BP: Ptr to IDEVARS
|
|---|
| 47 | ; Returns:
|
|---|
| 48 | ; AH: INT 13h Error Code
|
|---|
| 49 | ; CF: Cleared if success, Set if error
|
|---|
| 50 | ; Corrupts registers:
|
|---|
| 51 | ; AL, BL, CX, DX, SI, DI, ES
|
|---|
| 52 | ;--------------------------------------------------------------------
|
|---|
| 53 | IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH:
|
|---|
| 54 | ; Create fake DPT to be able to use Device.asm functions
|
|---|
| 55 | call FindDPT_ForNewDriveToDSDI
|
|---|
| 56 | xor ax, ax
|
|---|
| 57 | cmp BYTE [cs:bp+IDEVARS.bDevice], DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
|
|---|
| 58 | eCMOVE ax, FLG_DPT_REVERSED_A0_AND_A3
|
|---|
| 59 | or al, bh
|
|---|
| 60 | mov [di+DPT.wFlags], ax
|
|---|
| 61 | mov [di+DPT.bIdevarsOffset], bp
|
|---|
| 62 | mov BYTE [di+DPT_ATA.bSetBlock], 1 ; Block = 1 sector
|
|---|
| 63 |
|
|---|
| 64 | ; Wait until drive motors have reached max speed
|
|---|
| 65 | cmp bp, BYTE ROMVARS.ideVars0
|
|---|
| 66 | jne SHORT .SkipLongWaitSinceDriveIsNotPrimaryMaster
|
|---|
| 67 | test bh, FLG_DRVNHEAD_DRV
|
|---|
| 68 | jnz SHORT .SkipLongWaitSinceDriveIsNotPrimaryMaster
|
|---|
| 69 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_MOTOR_STARTUP, FLG_STATUS_BSY)
|
|---|
| 70 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 71 | .SkipLongWaitSinceDriveIsNotPrimaryMaster:
|
|---|
| 72 |
|
|---|
| 73 | ; Create IDEPACK without INTPACK
|
|---|
| 74 | push bp
|
|---|
| 75 | call Idepack_FakeToSSBP
|
|---|
| 76 |
|
|---|
| 77 | ; Prepare to output Identify Device command
|
|---|
| 78 | mov dl, 1 ; Sector count (required by IdeTransfer.asm)
|
|---|
| 79 | mov al, COMMAND_IDENTIFY_DEVICE
|
|---|
| 80 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_IDENTIFY_DEVICE, FLG_STATUS_DRQ)
|
|---|
| 81 | call Idepack_StoreNonExtParametersAndIssueCommandFromAL
|
|---|
| 82 |
|
|---|
| 83 | ; Clean stack and return
|
|---|
| 84 | rcl al, 1 ; Store CF
|
|---|
| 85 | add sp, BYTE SIZE_OF_FAKE_IDEPACK
|
|---|
| 86 | rcr al, 1 ; Restore CF
|
|---|
| 87 | pop bp
|
|---|
| 88 | ret
|
|---|
| 89 |
|
|---|
| 90 |
|
|---|
| 91 | ;--------------------------------------------------------------------
|
|---|
| 92 | ; IdeCommand_OutputWithParameters
|
|---|
| 93 | ; Parameters:
|
|---|
| 94 | ; BH: System timer ticks for timeout
|
|---|
| 95 | ; BL: IDE Status Register bit to poll after command
|
|---|
| 96 | ; ES:SI: Ptr to buffer (for data transfer commands)
|
|---|
| 97 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 98 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 99 | ; Returns:
|
|---|
| 100 | ; AH: INT 13h Error Code
|
|---|
| 101 | ; CF: Cleared if success, Set if error
|
|---|
| 102 | ; Corrupts registers:
|
|---|
| 103 | ; AL, BX, CX, DX, (ES:SI for data transfer commands)
|
|---|
| 104 | ;--------------------------------------------------------------------
|
|---|
| 105 | ALIGN JUMP_ALIGN
|
|---|
| 106 | IdeCommand_OutputWithParameters:
|
|---|
| 107 | push bx ; Store status register bits to poll
|
|---|
| 108 |
|
|---|
| 109 | ; Select Master or Slave drive and output head number or LBA28 top bits
|
|---|
| 110 | call IdeCommand_SelectDrive
|
|---|
| 111 | jc SHORT .DriveNotReady
|
|---|
| 112 |
|
|---|
| 113 | ; Output Device Control Byte to enable or disable interrupts
|
|---|
| 114 | mov dl, DEVICE_CONTROL_REGISTER_out
|
|---|
| 115 | mov al, [bp+IDEPACK.bDeviceControl]
|
|---|
| 116 | test al, FLG_DEVCONTROL_nIEN
|
|---|
| 117 | jnz SHORT .DoNotSetInterruptInServiceFlag
|
|---|
| 118 | or WORD [di+DPT.wFlags], FLG_DPT_INTERRUPT_IN_SERVICE
|
|---|
| 119 | push ds
|
|---|
| 120 | LOAD_BDA_SEGMENT_TO ds, cx, ! ; Also zero CX
|
|---|
| 121 | mov [BDA.bHDTaskFlg], al
|
|---|
| 122 | pop ds
|
|---|
| 123 | .DoNotSetInterruptInServiceFlag:
|
|---|
| 124 | call Device_OutputALtoIdeControlBlockRegisterInDL
|
|---|
| 125 |
|
|---|
| 126 | ; Output Feature Number
|
|---|
| 127 | mov dl, FEATURES_REGISTER_out
|
|---|
| 128 | mov al, [bp+IDEPACK.bFeatures]
|
|---|
| 129 | call Device_OutputALtoIdeRegisterInDL
|
|---|
| 130 |
|
|---|
| 131 | ; Output Sector Address High (only used by LBA48)
|
|---|
| 132 | mov ax, [bp+IDEPACK.wSectorCountHighAndLbaLowExt]
|
|---|
| 133 | mov cx, [bp+IDEPACK.wLbaMiddleAndHighExt]
|
|---|
| 134 | call OutputSectorCountAndAddress
|
|---|
| 135 |
|
|---|
| 136 | ; Output Sector Address Low
|
|---|
| 137 | mov ax, [bp+IDEPACK.wSectorCountAndLbaLow]
|
|---|
| 138 | mov cx, [bp+IDEPACK.wLbaMiddleAndHigh]
|
|---|
| 139 | call OutputSectorCountAndAddress
|
|---|
| 140 |
|
|---|
| 141 | ; Output command
|
|---|
| 142 | mov dl, COMMAND_REGISTER_out
|
|---|
| 143 | mov al, [bp+IDEPACK.bCommand]
|
|---|
| 144 | call Device_OutputALtoIdeRegisterInDL
|
|---|
| 145 |
|
|---|
| 146 | ; Wait until command completed
|
|---|
| 147 | pop bx ; Pop status and timeout for polling
|
|---|
| 148 | cmp bl, FLG_STATUS_DRQ ; Data transfer started?
|
|---|
| 149 | je SHORT .StartDataTransfer
|
|---|
| 150 | test BYTE [bp+IDEPACK.bDeviceControl], FLG_DEVCONTROL_nIEN
|
|---|
| 151 | jz SHORT .WaitForIrqOrRdy
|
|---|
| 152 | jmp IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 153 |
|
|---|
| 154 | ALIGN JUMP_ALIGN
|
|---|
| 155 | .WaitForIrqOrRdy:
|
|---|
| 156 | jmp IdeWait_IRQorStatusFlagInBLwithTimeoutInBH
|
|---|
| 157 | ALIGN JUMP_ALIGN
|
|---|
| 158 | .StartDataTransfer:
|
|---|
| 159 | jmp IdeTransfer_StartWithCommandInAL
|
|---|
| 160 |
|
|---|
| 161 | .DriveNotReady:
|
|---|
| 162 | pop bx ; Clean stack
|
|---|
| 163 | ReturnSinceTimeoutWhenPollingBusy:
|
|---|
| 164 | ret
|
|---|
| 165 |
|
|---|
| 166 |
|
|---|
| 167 | ;--------------------------------------------------------------------
|
|---|
| 168 | ; IdeCommand_SelectDrive
|
|---|
| 169 | ; Parameters:
|
|---|
| 170 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 171 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 172 | ; Returns:
|
|---|
| 173 | ; AH: INT 13h Error Code
|
|---|
| 174 | ; CF: Cleared if success, Set if error
|
|---|
| 175 | ; Corrupts registers:
|
|---|
| 176 | ; AL, BX, CX, DX
|
|---|
| 177 | ;--------------------------------------------------------------------
|
|---|
| 178 | ALIGN JUMP_ALIGN
|
|---|
| 179 | IdeCommand_SelectDrive:
|
|---|
| 180 | ; Wait until neither Master or Slave Drive is busy
|
|---|
| 181 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
|
|---|
| 182 | cmp BYTE [bp+IDEPACK.bCommand], COMMAND_IDENTIFY_DEVICE
|
|---|
| 183 | eCMOVE bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_IDENTIFY_DEVICE, FLG_STATUS_BSY)
|
|---|
| 184 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 185 | jc SHORT ReturnSinceTimeoutWhenPollingBusy
|
|---|
| 186 |
|
|---|
| 187 | ; Select Master or Slave Drive
|
|---|
| 188 | mov dl, DRIVE_AND_HEAD_SELECT_REGISTER
|
|---|
| 189 | mov al, [bp+IDEPACK.bDrvAndHead]
|
|---|
| 190 | call Device_OutputALtoIdeRegisterInDL
|
|---|
| 191 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRDY, FLG_STATUS_DRDY)
|
|---|
| 192 | cmp BYTE [bp+IDEPACK.bCommand], COMMAND_IDENTIFY_DEVICE
|
|---|
| 193 | eCMOVE bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_IDENTIFY_DEVICE, FLG_STATUS_DRDY)
|
|---|
| 194 | jmp IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 195 |
|
|---|
| 196 |
|
|---|
| 197 | ;--------------------------------------------------------------------
|
|---|
| 198 | ; OutputSectorCountAndAddress
|
|---|
| 199 | ; Parameters:
|
|---|
| 200 | ; AH: LBA low bits (Sector Number)
|
|---|
| 201 | ; AL: Sector Count
|
|---|
| 202 | ; CL: LBA middle bits (Cylinder Number low)
|
|---|
| 203 | ; CH: LBA high bits (Cylinder Number high)
|
|---|
| 204 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 205 | ; Returns:
|
|---|
| 206 | ; Nothing
|
|---|
| 207 | ; Corrupts registers:
|
|---|
| 208 | ; AL, BX, DX
|
|---|
| 209 | ;--------------------------------------------------------------------
|
|---|
| 210 | ALIGN JUMP_ALIGN
|
|---|
| 211 | OutputSectorCountAndAddress:
|
|---|
| 212 | mov dl, SECTOR_COUNT_REGISTER
|
|---|
| 213 | call Device_OutputALtoIdeRegisterInDL
|
|---|
| 214 |
|
|---|
| 215 | mov al, ah
|
|---|
| 216 | mov dl, LBA_LOW_REGISTER
|
|---|
| 217 | call Device_OutputALtoIdeRegisterInDL
|
|---|
| 218 |
|
|---|
| 219 | mov al, cl
|
|---|
| 220 | mov dl, LBA_MIDDLE_REGISTER
|
|---|
| 221 | call Device_OutputALtoIdeRegisterInDL
|
|---|
| 222 |
|
|---|
| 223 | mov al, ch
|
|---|
| 224 | mov dl, LBA_HIGH_REGISTER
|
|---|
| 225 | jmp Device_OutputALtoIdeRegisterInDL
|
|---|
