| [150] | 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : IDE Device Command functions.
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing code
|
|---|
| 5 | SECTION .text
|
|---|
| 6 |
|
|---|
| 7 | ;--------------------------------------------------------------------
|
|---|
| 8 | ; IdeCommand_ResetMasterAndSlaveController
|
|---|
| 9 | ; Parameters:
|
|---|
| 10 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 11 | ; Returns:
|
|---|
| 12 | ; AH: INT 13h Error Code
|
|---|
| 13 | ; CF: Cleared if success, Set if error
|
|---|
| 14 | ; Corrupts registers:
|
|---|
| 15 | ; AL, BX, CX, DX
|
|---|
| 16 | ;--------------------------------------------------------------------
|
|---|
| 17 | IdeCommand_ResetMasterAndSlaveController:
|
|---|
| 18 | ; HSR0: Set_SRST
|
|---|
| 19 | call AccessDPT_GetDeviceControlByteToAL
|
|---|
| 20 | or al, FLG_DEVCONTROL_SRST | FLG_DEVCONTROL_nIEN ; Set Reset bit
|
|---|
| 21 | mov dl, DEVICE_CONTROL_REGISTER_out
|
|---|
| [160] | 22 | call IdeIO_OutputALtoIdeControlBlockRegisterInDL
|
|---|
| [150] | 23 | mov ax, HSR0_RESET_WAIT_US
|
|---|
| [155] | 24 | call Timer_DelayMicrosecondsFromAX
|
|---|
| [150] | 25 |
|
|---|
| 26 | ; HSR1: Clear_wait
|
|---|
| 27 | call AccessDPT_GetDeviceControlByteToAL
|
|---|
| 28 | or al, FLG_DEVCONTROL_nIEN
|
|---|
| 29 | and al, ~FLG_DEVCONTROL_SRST ; Clear reset bit
|
|---|
| 30 | mov dl, DEVICE_CONTROL_REGISTER_out
|
|---|
| [160] | 31 | call IdeIO_OutputALtoIdeControlBlockRegisterInDL
|
|---|
| [150] | 32 | mov ax, HSR1_RESET_WAIT_US
|
|---|
| [155] | 33 | call Timer_DelayMicrosecondsFromAX
|
|---|
| [150] | 34 |
|
|---|
| 35 | ; HSR2: Check_status
|
|---|
| 36 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_MOTOR_STARTUP, FLG_STATUS_BSY)
|
|---|
| 37 | jmp IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 38 |
|
|---|
| 39 |
|
|---|
| 40 | ;--------------------------------------------------------------------
|
|---|
| 41 | ; IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
|
|---|
| 42 | ; Parameters:
|
|---|
| 43 | ; BH: Drive Select byte for Drive and Head Select Register
|
|---|
| 44 | ; DS: Segment to RAMVARS
|
|---|
| 45 | ; ES:SI: Ptr to buffer to receive 512-byte IDE Information
|
|---|
| 46 | ; CS:BP: Ptr to IDEVARS
|
|---|
| 47 | ; Returns:
|
|---|
| 48 | ; AH: INT 13h Error Code
|
|---|
| 49 | ; CF: Cleared if success, Set if error
|
|---|
| 50 | ; Corrupts registers:
|
|---|
| 51 | ; AL, BL, CX, DX, SI, DI, ES
|
|---|
| 52 | ;--------------------------------------------------------------------
|
|---|
| 53 | IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH:
|
|---|
| 54 | ; Create fake DPT to be able to use Device.asm functions
|
|---|
| 55 | call FindDPT_ForNewDriveToDSDI
|
|---|
| [158] | 56 | eMOVZX ax, bh
|
|---|
| [150] | 57 | mov [di+DPT.wFlags], ax
|
|---|
| 58 | mov [di+DPT.bIdevarsOffset], bp
|
|---|
| 59 | mov BYTE [di+DPT_ATA.bSetBlock], 1 ; Block = 1 sector
|
|---|
| [160] | 60 | call IdeDPT_StoreReversedAddressLinesFlagIfNecessary
|
|---|
| [150] | 61 |
|
|---|
| 62 | ; Wait until drive motors have reached max speed
|
|---|
| 63 | cmp bp, BYTE ROMVARS.ideVars0
|
|---|
| 64 | jne SHORT .SkipLongWaitSinceDriveIsNotPrimaryMaster
|
|---|
| [158] | 65 | test al, FLG_DRVNHEAD_DRV
|
|---|
| [150] | 66 | jnz SHORT .SkipLongWaitSinceDriveIsNotPrimaryMaster
|
|---|
| 67 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_MOTOR_STARTUP, FLG_STATUS_BSY)
|
|---|
| 68 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 69 | .SkipLongWaitSinceDriveIsNotPrimaryMaster:
|
|---|
| 70 |
|
|---|
| 71 | ; Create IDEPACK without INTPACK
|
|---|
| 72 | push bp
|
|---|
| 73 | call Idepack_FakeToSSBP
|
|---|
| 74 |
|
|---|
| 75 | ; Prepare to output Identify Device command
|
|---|
| 76 | mov dl, 1 ; Sector count (required by IdeTransfer.asm)
|
|---|
| 77 | mov al, COMMAND_IDENTIFY_DEVICE
|
|---|
| 78 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_IDENTIFY_DEVICE, FLG_STATUS_DRQ)
|
|---|
| 79 | call Idepack_StoreNonExtParametersAndIssueCommandFromAL
|
|---|
| 80 |
|
|---|
| 81 | ; Clean stack and return
|
|---|
| [158] | 82 | lea sp, [bp+EXTRA_BYTES_FOR_INTPACK] ; This assumes BP hasn't changed between Idepack_FakeToSSBP and here
|
|---|
| [150] | 83 | pop bp
|
|---|
| 84 | ret
|
|---|
| 85 |
|
|---|
| 86 |
|
|---|
| 87 | ;--------------------------------------------------------------------
|
|---|
| 88 | ; IdeCommand_OutputWithParameters
|
|---|
| 89 | ; Parameters:
|
|---|
| 90 | ; BH: System timer ticks for timeout
|
|---|
| 91 | ; BL: IDE Status Register bit to poll after command
|
|---|
| 92 | ; ES:SI: Ptr to buffer (for data transfer commands)
|
|---|
| 93 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 94 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 95 | ; Returns:
|
|---|
| 96 | ; AH: INT 13h Error Code
|
|---|
| 97 | ; CF: Cleared if success, Set if error
|
|---|
| 98 | ; Corrupts registers:
|
|---|
| 99 | ; AL, BX, CX, DX, (ES:SI for data transfer commands)
|
|---|
| 100 | ;--------------------------------------------------------------------
|
|---|
| 101 | ALIGN JUMP_ALIGN
|
|---|
| 102 | IdeCommand_OutputWithParameters:
|
|---|
| [158] | 103 | push bx ; Store status register bits to poll
|
|---|
| [150] | 104 |
|
|---|
| 105 | ; Select Master or Slave drive and output head number or LBA28 top bits
|
|---|
| 106 | call IdeCommand_SelectDrive
|
|---|
| 107 | jc SHORT .DriveNotReady
|
|---|
| 108 |
|
|---|
| 109 | ; Output Device Control Byte to enable or disable interrupts
|
|---|
| 110 | mov al, [bp+IDEPACK.bDeviceControl]
|
|---|
| [158] | 111 | test al, FLG_DEVCONTROL_nIEN ; Interrupts disabled?
|
|---|
| [152] | 112 | jnz SHORT .DoNotSetInterruptInServiceFlag
|
|---|
| [158] | 113 |
|
|---|
| 114 | ; Clear Task Flag and set Interrupt In-Service Flag
|
|---|
| 115 | or BYTE [di+DPT.bFlagsHigh], FLGH_DPT_INTERRUPT_IN_SERVICE
|
|---|
| [152] | 116 | push ds
|
|---|
| [158] | 117 | LOAD_BDA_SEGMENT_TO ds, dx, ! ; Also zero DX
|
|---|
| 118 | mov [BDA.bHDTaskFlg], dl
|
|---|
| [152] | 119 | pop ds
|
|---|
| 120 | .DoNotSetInterruptInServiceFlag:
|
|---|
| [158] | 121 | mov dl, DEVICE_CONTROL_REGISTER_out
|
|---|
| [160] | 122 | call IdeIO_OutputALtoIdeControlBlockRegisterInDL
|
|---|
| [150] | 123 |
|
|---|
| 124 | ; Output Feature Number
|
|---|
| 125 | mov dl, FEATURES_REGISTER_out
|
|---|
| 126 | mov al, [bp+IDEPACK.bFeatures]
|
|---|
| [160] | 127 | call IdeIO_OutputALtoIdeRegisterInDL
|
|---|
| [150] | 128 |
|
|---|
| 129 | ; Output Sector Address High (only used by LBA48)
|
|---|
| [169] | 130 | mov ax, [bp+IDEPACK.wSectorCountHighAndLbaLowExt]
|
|---|
| [150] | 131 | mov cx, [bp+IDEPACK.wLbaMiddleAndHighExt]
|
|---|
| 132 | call OutputSectorCountAndAddress
|
|---|
| 133 |
|
|---|
| 134 | ; Output Sector Address Low
|
|---|
| 135 | mov ax, [bp+IDEPACK.wSectorCountAndLbaLow]
|
|---|
| 136 | mov cx, [bp+IDEPACK.wLbaMiddleAndHigh]
|
|---|
| 137 | call OutputSectorCountAndAddress
|
|---|
| 138 |
|
|---|
| 139 | ; Output command
|
|---|
| 140 | mov dl, COMMAND_REGISTER_out
|
|---|
| 141 | mov al, [bp+IDEPACK.bCommand]
|
|---|
| [160] | 142 | call IdeIO_OutputALtoIdeRegisterInDL
|
|---|
| [150] | 143 |
|
|---|
| 144 | ; Wait until command completed
|
|---|
| [158] | 145 | pop bx ; Pop status and timeout for polling
|
|---|
| 146 | cmp bl, FLG_STATUS_DRQ ; Data transfer started?
|
|---|
| 147 | je SHORT IdeTransfer_StartWithCommandInAL
|
|---|
| [150] | 148 | test BYTE [bp+IDEPACK.bDeviceControl], FLG_DEVCONTROL_nIEN
|
|---|
| 149 | jz SHORT .WaitForIrqOrRdy
|
|---|
| 150 | jmp IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 151 |
|
|---|
| 152 | ALIGN JUMP_ALIGN
|
|---|
| 153 | .WaitForIrqOrRdy:
|
|---|
| 154 | jmp IdeWait_IRQorStatusFlagInBLwithTimeoutInBH
|
|---|
| 155 |
|
|---|
| 156 | .DriveNotReady:
|
|---|
| 157 | pop bx ; Clean stack
|
|---|
| 158 | ReturnSinceTimeoutWhenPollingBusy:
|
|---|
| 159 | ret
|
|---|
| 160 |
|
|---|
| 161 |
|
|---|
| 162 | ;--------------------------------------------------------------------
|
|---|
| 163 | ; IdeCommand_SelectDrive
|
|---|
| 164 | ; Parameters:
|
|---|
| 165 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 166 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 167 | ; Returns:
|
|---|
| 168 | ; AH: INT 13h Error Code
|
|---|
| 169 | ; CF: Cleared if success, Set if error
|
|---|
| 170 | ; Corrupts registers:
|
|---|
| 171 | ; AL, BX, CX, DX
|
|---|
| 172 | ;--------------------------------------------------------------------
|
|---|
| 173 | ALIGN JUMP_ALIGN
|
|---|
| 174 | IdeCommand_SelectDrive:
|
|---|
| 175 | ; Wait until neither Master or Slave Drive is busy
|
|---|
| 176 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_BSY, FLG_STATUS_BSY)
|
|---|
| 177 | cmp BYTE [bp+IDEPACK.bCommand], COMMAND_IDENTIFY_DEVICE
|
|---|
| [158] | 178 | eCMOVE bh, TIMEOUT_IDENTIFY_DEVICE
|
|---|
| [150] | 179 | call IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 180 | jc SHORT ReturnSinceTimeoutWhenPollingBusy
|
|---|
| 181 |
|
|---|
| 182 | ; Select Master or Slave Drive
|
|---|
| 183 | mov dl, DRIVE_AND_HEAD_SELECT_REGISTER
|
|---|
| 184 | mov al, [bp+IDEPACK.bDrvAndHead]
|
|---|
| [160] | 185 | call IdeIO_OutputALtoIdeRegisterInDL
|
|---|
| [150] | 186 | mov bx, TIMEOUT_AND_STATUS_TO_WAIT(TIMEOUT_DRDY, FLG_STATUS_DRDY)
|
|---|
| 187 | cmp BYTE [bp+IDEPACK.bCommand], COMMAND_IDENTIFY_DEVICE
|
|---|
| [158] | 188 | eCMOVE bh, TIMEOUT_IDENTIFY_DEVICE
|
|---|
| [150] | 189 | jmp IdeWait_PollStatusFlagInBLwithTimeoutInBH
|
|---|
| 190 |
|
|---|
| 191 |
|
|---|
| 192 | ;--------------------------------------------------------------------
|
|---|
| 193 | ; OutputSectorCountAndAddress
|
|---|
| 194 | ; Parameters:
|
|---|
| 195 | ; AH: LBA low bits (Sector Number)
|
|---|
| 196 | ; AL: Sector Count
|
|---|
| 197 | ; CL: LBA middle bits (Cylinder Number low)
|
|---|
| 198 | ; CH: LBA high bits (Cylinder Number high)
|
|---|
| 199 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 200 | ; Returns:
|
|---|
| 201 | ; Nothing
|
|---|
| 202 | ; Corrupts registers:
|
|---|
| 203 | ; AL, BX, DX
|
|---|
| 204 | ;--------------------------------------------------------------------
|
|---|
| 205 | ALIGN JUMP_ALIGN
|
|---|
| 206 | OutputSectorCountAndAddress:
|
|---|
| 207 | mov dl, SECTOR_COUNT_REGISTER
|
|---|
| [160] | 208 | call IdeIO_OutputALtoIdeRegisterInDL
|
|---|
| [150] | 209 |
|
|---|
| 210 | mov al, ah
|
|---|
| 211 | mov dl, LBA_LOW_REGISTER
|
|---|
| [160] | 212 | call IdeIO_OutputALtoIdeRegisterInDL
|
|---|
| [150] | 213 |
|
|---|
| 214 | mov al, cl
|
|---|
| 215 | mov dl, LBA_MIDDLE_REGISTER
|
|---|
| [160] | 216 | call IdeIO_OutputALtoIdeRegisterInDL
|
|---|
| [150] | 217 |
|
|---|
| 218 | mov al, ch
|
|---|
| 219 | mov dl, LBA_HIGH_REGISTER
|
|---|
| [160] | 220 | jmp IdeIO_OutputALtoIdeRegisterInDL
|
|---|
