source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/Device.asm@ 191

Last change on this file since 191 was 181, checked in by krille_n_@…, 13 years ago

Changes to all parts of the project:

  • Size optimizations.
  • Added a define (EXCLUDE_FROM_XTIDECFG) to exclude unused library code from XTIDECFG.
  • Tried to minimize time spent with interrupts disabled.
  • Some minor attempts to improve speed (reordering instructions etc).
  • Tried to improve readability, did some cleanup and fixed some errors in comments.
File size: 4.1 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Command and port direction functions for different device types.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; Device_FinalizeDPT
9; Parameters:
10; DS:DI: Ptr to Disk Parameter Table
11; ES:SI: Ptr to 512-byte ATA information read from the drive
12; CS:BP: Ptr to IDEVARS for the controller
13; Returns:
14; Nothing
15; Corrupts registers:
16; AX, BX, CX, DX
17;--------------------------------------------------------------------
18%ifdef MODULE_SERIAL
19Device_FinalizeDPT:
20 test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
21 jnz SHORT .FinalizeDptForSerialPortDevice
22 jmp IdeDPT_Finalize
23
24.FinalizeDptForSerialPortDevice:
25 jmp SerialDPT_Finalize
26%else
27 Device_FinalizeDPT EQU IdeDPT_Finalize
28%endif
29
30
31;--------------------------------------------------------------------
32; Device_ResetMasterAndSlaveController
33; Parameters:
34; DS:DI: Ptr to DPT (in RAMVARS segment)
35; Returns:
36; AH: INT 13h Error Code
37; CF: Cleared if success, Set if error
38; Corrupts registers:
39; AL, BX, CX, DX
40;--------------------------------------------------------------------
41%ifdef MODULE_SERIAL
42Device_ResetMasterAndSlaveController:
43 test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
44 jnz SHORT ReturnSuccessForSerialPort
45 jmp IdeCommand_ResetMasterAndSlaveController
46%else
47 Device_ResetMasterAndSlaveController EQU IdeCommand_ResetMasterAndSlaveController
48%endif
49
50
51;--------------------------------------------------------------------
52; Device_IdentifyToBufferInESSIwithDriveSelectByteInBH
53; Parameters:
54; BH: Drive Select byte for Drive and Head Select Register
55; DS: Segment to RAMVARS
56; ES:SI: Ptr to buffer to receive 512-byte IDE Information
57; CS:BP: Ptr to IDEVARS
58; Returns:
59; AH: INT 13h Error Code
60; CF: Cleared if success, Set if error
61; Corrupts registers:
62; AL, BL, CX, DX, SI, DI, ES
63;--------------------------------------------------------------------
64%ifdef MODULE_SERIAL
65Device_IdentifyToBufferInESSIwithDriveSelectByteInBH:
66 cmp BYTE [cs:bp+IDEVARS.bDevice], DEVICE_SERIAL_PORT
67 je SHORT .IdentifyDriveFromSerialPort
68 jmp IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
69
70.IdentifyDriveFromSerialPort:
71 jmp SerialCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
72%else
73 Device_IdentifyToBufferInESSIwithDriveSelectByteInBH EQU IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
74%endif
75
76
77;--------------------------------------------------------------------
78; Device_OutputCommandWithParameters
79; Parameters:
80; BH: Default system timer ticks for timeout (can be ignored)
81; BL: IDE Status Register bit to poll after command
82; ES:SI: Ptr to buffer (for data transfer commands)
83; DS:DI: Ptr to DPT (in RAMVARS segment)
84; SS:BP: Ptr to IDEPACK
85; Returns:
86; AH: INT 13h Error Code
87; CF: Cleared if success, Set if error
88; Corrupts registers:
89; AL, BX, CX, DX, (ES:SI for data transfer commands)
90;--------------------------------------------------------------------
91%ifdef MODULE_SERIAL
92ALIGN JUMP_ALIGN
93Device_OutputCommandWithParameters:
94 test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
95 jnz SHORT .OutputCommandToSerialPort
96 jmp IdeCommand_OutputWithParameters
97
98ALIGN JUMP_ALIGN
99.OutputCommandToSerialPort:
100 jmp SerialCommand_OutputWithParameters
101%else
102 Device_OutputCommandWithParameters EQU IdeCommand_OutputWithParameters
103%endif
104
105
106;--------------------------------------------------------------------
107; Device_SelectDrive
108; Parameters:
109; DS:DI: Ptr to DPT (in RAMVARS segment)
110; SS:BP: Ptr to IDEPACK
111; Returns:
112; AH: INT 13h Error Code
113; CF: Cleared if success, Set if error
114; Corrupts registers:
115; AL, BX, CX, DX
116;--------------------------------------------------------------------
117%ifdef MODULE_SERIAL
118ALIGN JUMP_ALIGN
119Device_SelectDrive:
120 test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
121 jnz SHORT ReturnSuccessForSerialPort
122 jmp IdeCommand_SelectDrive
123
124ReturnSuccessForSerialPort:
125 xor ax, ax
126 ret
127%else
128 Device_SelectDrive EQU IdeCommand_SelectDrive
129%endif
130
Note: See TracBrowser for help on using the repository browser.