source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Device/Device.asm@ 623

; Project name  :   XTIDE Universal BIOS
; Description   :   Command and port direction functions for different device types.

;
; XTIDE Universal BIOS and Associated Tools
; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 2 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
; GNU General Public License for more details.
; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
;

; Section containing code
SECTION .text


%macro TEST_USING_DPT_AND_JUMP_IF_SERIAL_DEVICE 1
    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
    jnz     SHORT %1
%endmacro

%macro CMP_USING_IDEVARS_IN_CSBP_AND_JUMP_IF 2
    cmp     BYTE [cs:bp+IDEVARS.bDevice], %1
    je      SHORT %2
%endmacro



;--------------------------------------------------------------------
; Device_FinalizeDPT
;   Parameters:
;       DS:DI:  Ptr to Disk Parameter Table
;       ES:SI:  Ptr to 512-byte ATA information read from the drive
;       CS:BP:  Ptr to IDEVARS for the controller
;   Returns:
;       Nothing
;   Corrupts registers:
;       AX, BX, CX, DX
;--------------------------------------------------------------------
%ifdef MODULE_SERIAL    ; IDE + Serial
Device_FinalizeDPT:
    ; Needs to check IDEVARS vs. checking the DPT as the serial bit in the DPT is set in the Finalize routine
    cmp     BYTE [cs:bp+IDEVARS.bDevice], DEVICE_SERIAL_PORT
%ifdef USE_386
    jne     IdeDPT_Finalize
    jmp     SerialDPT_Finalize
%else ; ~USE_386
    je      SHORT .FinalizeDptForSerialPortDevice
    jmp     IdeDPT_Finalize
.FinalizeDptForSerialPortDevice:
    jmp     SerialDPT_Finalize
%endif

%else                   ; IDE
    Device_FinalizeDPT      EQU     IdeDPT_Finalize
%endif


;--------------------------------------------------------------------
; Device_ResetMasterAndSlaveController
;   Parameters:
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;   Returns:
;       AH:     INT 13h Error Code
;       CF:     Cleared if success, Set if error
;   Corrupts registers:
;       AL, BX, CX, DX
;--------------------------------------------------------------------
%ifdef MODULE_SERIAL    ; IDE + Serial
Device_ResetMasterAndSlaveController:
    TEST_USING_DPT_AND_JUMP_IF_SERIAL_DEVICE    ReturnSuccessForSerialPort
    jmp     IdeCommand_ResetMasterAndSlaveController

%else                   ; IDE
    Device_ResetMasterAndSlaveController    EQU     IdeCommand_ResetMasterAndSlaveController
%endif


;--------------------------------------------------------------------
; Device_IdentifyToBufferInESSIwithDriveSelectByteInBH
;   Parameters:
;       BH:     Drive Select byte for Drive and Head Select Register
;       CX:     XUB_INT13h_SIGNATURE to ignore illegal ATA-ID values, otherwise
;               correct them (only used if NOT build with NO_ATAID_CORRECTION)
;       DX:     Autodetected port (for devices that support autodetection)
;       DS:     Segment to RAMVARS
;       ES:SI:  Ptr to buffer to receive 512-byte IDE Information
;       CS:BP:  Ptr to IDEVARS
;   Returns:
;       AH:     INT 13h Error Code
;       CF:     Cleared if success, Set if error
;   Corrupts registers:
;       AL, BX, CX, DX, SI, DI, ES
;--------------------------------------------------------------------
%ifndef NO_ATAID_CORRECTION
Device_IdentifyToBufferInESSIwithDriveSelectByteInBH:
    cmp     cx, XUB_INT13h_SIGNATURE
    je      SHORT .DoNotFixAtaInformation
    push    es
    push    si
    ePUSH_T cx, AtaID_PopESSIandFixIllegalValuesFromESSI    ; Here we modify ATA information if necessary
.DoNotFixAtaInformation:

%ifdef MODULE_SERIAL    ; IDE + Serial
    cmp     BYTE [cs:bp+IDEVARS.bDevice], DEVICE_SERIAL_PORT
%ifdef USE_386
    jne     IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
    jmp     SerialCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
%else ; ~USE_386
    je      SHORT .IdentifyDriveFromSerialPort
    jmp     IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
.IdentifyDriveFromSerialPort:
    jmp     SerialCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
%endif

%else                   ; IDE
    jmp     IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
%endif

%else ; NO_ATAID_CORRECTION
%ifdef MODULE_SERIAL    ; IDE + Serial
    cmp     BYTE [cs:bp+IDEVARS.bDevice], DEVICE_SERIAL_PORT
%ifdef USE_386
    jne     IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
    jmp     SerialCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
%else ; ~USE_386
    je      SHORT .IdentifyDriveFromSerialPort
    jmp     IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
.IdentifyDriveFromSerialPort:
    jmp     SerialCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
%endif

%else                   ; IDE
    Device_IdentifyToBufferInESSIwithDriveSelectByteInBH    EQU     IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
%endif
%endif ; NO_ATAID_CORRECTION


;--------------------------------------------------------------------
; Device_OutputCommandWithParameters
;   Parameters:
;       BH:     Default system timer ticks for timeout (can be ignored)
;       BL:     IDE Status Register bit to poll after command
;       ES:SI:  Ptr to buffer (for data transfer commands)
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;       SS:BP:  Ptr to IDEPACK
;   Returns:
;       AH:     INT 13h Error Code
;       CX:     Number of successfully transferred sectors (for transfer commands)
;       CF:     Cleared if success, Set if error
;   Corrupts registers:
;       AL, BX, (CX), DX, (ES:SI for data transfer commands)
;--------------------------------------------------------------------
%ifdef MODULE_SERIAL    ; IDE + Serial
ALIGN JUMP_ALIGN
Device_OutputCommandWithParameters:
    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
%ifdef USE_386
    jz      IdeCommand_OutputWithParameters
    jmp     SerialCommand_OutputWithParameters
%else ; ~USE_386
    jnz     SHORT .OutputCommandToSerialPort
    jmp     IdeCommand_OutputWithParameters

ALIGN JUMP_ALIGN
.OutputCommandToSerialPort:
    jmp     SerialCommand_OutputWithParameters
%endif

%else                   ; IDE
    Device_OutputCommandWithParameters      EQU     IdeCommand_OutputWithParameters
%endif


;--------------------------------------------------------------------
; Device_ReadLBAlowRegisterToAL
; Returns LBA low register / Sector number register contents.
; Note that this returns valid value only after transfer command (read/write/verify)
; has stopped to an error. Do not call this otherwise.
;   Parameters:
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;   Returns:
;       AL:     Byte read from the device register
;   Corrupts registers:
;       BX, DX
;--------------------------------------------------------------------
;%ifdef MODULE_SERIAL   ; IDE + Serial
;ALIGN JUMP_ALIGN
;Device_ReadLBAlowRegisterToAL:
;   test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
;%ifdef USE_386
;   jz      IdeCommand_ReadLBAlowRegisterToAL
;   jmp     SerialCommand_ReadLBAlowRegisterToAL
;%else ; ~USE_386
;   jnz     SHORT .ReadFromSerialPort
;   jmp     IdeCommand_ReadLBAlowRegisterToAL

;ALIGN JUMP_ALIGN
;.ReadFromSerialPort:
;   jmp     SerialCommand_ReadLBAlowRegisterToAL
;%endif

;%else                  ; IDE only
    Device_ReadLBAlowRegisterToAL       EQU     IdeCommand_ReadLBAlowRegisterToAL
;%endif
; TODO: For now we simply assume serial device do not produce verify errors


;--------------------------------------------------------------------
; Device_SelectDrive
;   Parameters:
;       DS:DI:  Ptr to DPT (in RAMVARS segment)
;       SS:BP:  Ptr to IDEPACK
;   Returns:
;       AH:     INT 13h Error Code
;       CF:     Cleared if success, Set if error
;   Corrupts registers:
;       AL, BX, CX, DX
;--------------------------------------------------------------------
%ifdef MODULE_SERIAL    ; IDE + Serial
Device_SelectDrive:
    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
%ifndef USE_386
    jnz     SHORT ReturnSuccessForSerialPort
    jmp     IdeCommand_SelectDrive
%else ; USE_386
    jz      IdeCommand_SelectDrive
    ; Fall to ReturnSuccessForSerialPort
%endif

%else                   ; IDE
    Device_SelectDrive      EQU     IdeCommand_SelectDrive
%endif


%ifdef MODULE_SERIAL
ReturnSuccessForSerialPort:
    xor     ax, ax
    ret
%endif