| [150] | 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Command and port direction functions for different device types.
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing code
|
|---|
| 5 | SECTION .text
|
|---|
| 6 |
|
|---|
| 7 | ;--------------------------------------------------------------------
|
|---|
| 8 | ; Device_FinalizeDPT
|
|---|
| 9 | ; Parameters:
|
|---|
| 10 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 11 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| [160] | 12 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| [150] | 13 | ; Returns:
|
|---|
| 14 | ; Nothing
|
|---|
| 15 | ; Corrupts registers:
|
|---|
| 16 | ; AX, BX, CX, DX
|
|---|
| 17 | ;--------------------------------------------------------------------
|
|---|
| 18 | Device_FinalizeDPT:
|
|---|
| [158] | 19 | test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
|
|---|
| [150] | 20 | jnz SHORT ReturnSuccessForSerialPort
|
|---|
| 21 | jmp IdeDPT_Finalize
|
|---|
| [161] | 22 | ;.FinalizeDptForSerialPortDevice: ; Dead label
|
|---|
| 23 | ; jmp SerialDPT_Finalize ; and code
|
|---|
| [150] | 24 |
|
|---|
| 25 |
|
|---|
| 26 | ;--------------------------------------------------------------------
|
|---|
| 27 | ; Device_ResetMasterAndSlaveController
|
|---|
| 28 | ; Parameters:
|
|---|
| 29 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 30 | ; Returns:
|
|---|
| 31 | ; AH: INT 13h Error Code
|
|---|
| 32 | ; CF: Cleared if success, Set if error
|
|---|
| 33 | ; Corrupts registers:
|
|---|
| 34 | ; AL, BX, CX, DX
|
|---|
| 35 | ;--------------------------------------------------------------------
|
|---|
| 36 | Device_ResetMasterAndSlaveController:
|
|---|
| [158] | 37 | test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
|
|---|
| [150] | 38 | jnz SHORT ReturnSuccessForSerialPort
|
|---|
| 39 | jmp IdeCommand_ResetMasterAndSlaveController
|
|---|
| 40 |
|
|---|
| 41 |
|
|---|
| 42 | ;--------------------------------------------------------------------
|
|---|
| 43 | ; Device_IdentifyToBufferInESSIwithDriveSelectByteInBH
|
|---|
| 44 | ; Parameters:
|
|---|
| 45 | ; BH: Drive Select byte for Drive and Head Select Register
|
|---|
| 46 | ; DS: Segment to RAMVARS
|
|---|
| 47 | ; ES:SI: Ptr to buffer to receive 512-byte IDE Information
|
|---|
| 48 | ; CS:BP: Ptr to IDEVARS
|
|---|
| 49 | ; Returns:
|
|---|
| 50 | ; AH: INT 13h Error Code
|
|---|
| 51 | ; CF: Cleared if success, Set if error
|
|---|
| 52 | ; Corrupts registers:
|
|---|
| 53 | ; AL, BL, CX, DX, SI, DI, ES
|
|---|
| 54 | ;--------------------------------------------------------------------
|
|---|
| 55 | Device_IdentifyToBufferInESSIwithDriveSelectByteInBH:
|
|---|
| 56 | cmp BYTE [cs:bp+IDEVARS.bDevice], DEVICE_SERIAL_PORT
|
|---|
| 57 | je SHORT .IdentifyDriveFromSerialPort
|
|---|
| 58 | jmp IdeCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
|
|---|
| 59 | .IdentifyDriveFromSerialPort:
|
|---|
| 60 | jmp SerialCommand_IdentifyDeviceToBufferInESSIwithDriveSelectByteInBH
|
|---|
| 61 |
|
|---|
| 62 |
|
|---|
| 63 | ;--------------------------------------------------------------------
|
|---|
| 64 | ; Device_OutputCommandWithParameters
|
|---|
| 65 | ; Parameters:
|
|---|
| 66 | ; BH: Default system timer ticks for timeout (can be ignored)
|
|---|
| 67 | ; BL: IDE Status Register bit to poll after command
|
|---|
| 68 | ; ES:SI: Ptr to buffer (for data transfer commands)
|
|---|
| 69 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 70 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 71 | ; Returns:
|
|---|
| 72 | ; AH: INT 13h Error Code
|
|---|
| 73 | ; CF: Cleared if success, Set if error
|
|---|
| 74 | ; Corrupts registers:
|
|---|
| 75 | ; AL, BX, CX, DX, (ES:SI for data transfer commands)
|
|---|
| 76 | ;--------------------------------------------------------------------
|
|---|
| 77 | ALIGN JUMP_ALIGN
|
|---|
| 78 | Device_OutputCommandWithParameters:
|
|---|
| [158] | 79 | test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
|
|---|
| [150] | 80 | jnz SHORT .OutputCommandToSerialPort
|
|---|
| 81 | jmp IdeCommand_OutputWithParameters
|
|---|
| 82 | ALIGN JUMP_ALIGN
|
|---|
| 83 | .OutputCommandToSerialPort:
|
|---|
| 84 | jmp SerialCommand_OutputWithParameters
|
|---|
| 85 |
|
|---|
| 86 |
|
|---|
| 87 | ;--------------------------------------------------------------------
|
|---|
| 88 | ; Device_SelectDrive
|
|---|
| 89 | ; Parameters:
|
|---|
| 90 | ; DS:DI: Ptr to DPT (in RAMVARS segment)
|
|---|
| 91 | ; SS:BP: Ptr to IDEPACK
|
|---|
| 92 | ; Returns:
|
|---|
| 93 | ; AH: INT 13h Error Code
|
|---|
| 94 | ; CF: Cleared if success, Set if error
|
|---|
| 95 | ; Corrupts registers:
|
|---|
| 96 | ; AL, BX, CX, DX
|
|---|
| 97 | ;--------------------------------------------------------------------
|
|---|
| 98 | ALIGN JUMP_ALIGN
|
|---|
| 99 | Device_SelectDrive:
|
|---|
| [158] | 100 | test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
|
|---|
| [150] | 101 | jnz SHORT ReturnSuccessForSerialPort
|
|---|
| 102 | jmp IdeCommand_SelectDrive
|
|---|
| 103 | ReturnSuccessForSerialPort:
|
|---|
| 104 | xor ax, ax
|
|---|
| 105 | ret
|
|---|
