source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenuPrintCfg.asm@ 138

Last change on this file since 138 was 127, checked in by Tomi Tilli, 14 years ago

Changes to XTIDE Universal BIOS:

  • More boot menu fixes.
File size: 5.3 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Functions for printing drive configuration
3; information on Boot Menu.
4
5; Section containing code
6SECTION .text
7
8;--------------------------------------------------------------------
9; Prints Hard Disk configuration for drive handled by our BIOS.
10; Cursor is set to configuration header string position.
11;
12; BootMenuPrintCfg_ForOurDrive
13; Parameters:
14; DS: Segment to DPT
15; Stack: Offset to DPT
16; Returns:
17; Nothing
18; Corrupts registers:
19; AX, BX, CX, DX, SI, DI, ES
20;--------------------------------------------------------------------
21ALIGN JUMP_ALIGN
22BootMenuPrintCfg_ForOurDrive:
23 pop di
24 mov si, g_szCfgHeader
25 call BootMenuPrint_NullTerminatedStringFromCSSIandSetCF
26 call BootMenuPrintCfg_GetPointers
27 ; Fall to PushAndFormatCfgString
28
29
30;--------------------------------------------------------------------
31; PushAndFormatCfgString
32; Parameters:
33; DS:DI: Ptr to DPT
34; ES:BX: Ptr to BOOTNFO
35; CS:SI: Ptr to IDEVARS
36; Returns:
37; Nothing
38; Corrupts registers:
39; AX, DX, SI, DI
40;--------------------------------------------------------------------
41PushAndFormatCfgString:
42 push bp
43 mov bp, sp
44 ; Fall to first push below
45
46;--------------------------------------------------------------------
47; PushAddressingMode
48; Parameters:
49; DS:DI: Ptr to DPT
50; ES:BX: Ptr to BOOTNFO
51; CS:SI: Ptr to IDEVARS
52; Returns:
53; Nothing (jumps to next push below)
54; Corrupts registers:
55; AX
56;--------------------------------------------------------------------
57PushAddressingMode:
58 xchg ax, bx
59 mov bx, MASK_DPT_ADDR ; Load addressing mode mask
60 and bl, [di+DPT.bFlags] ; Addressing mode now in BX
61 push WORD [cs:bx+.rgszAddressingModeString]
62 xchg bx, ax
63 jmp SHORT .NextPush
64ALIGN WORD_ALIGN
65.rgszAddressingModeString:
66 dw g_szLCHS
67 dw g_szPCHS
68 dw g_szLBA28
69 dw g_szLBA48
70ALIGN JUMP_ALIGN
71.NextPush:
72
73;--------------------------------------------------------------------
74; PushBlockMode
75; Parameters:
76; DS:DI: Ptr to DPT
77; ES:BX: Ptr to BOOTNFO
78; CS:SI: Ptr to IDEVARS
79; Returns:
80; Nothing (falls to next push below)
81; Corrupts registers:
82; AX
83;--------------------------------------------------------------------
84PushBlockMode:
85 eMOVZX ax, BYTE [di+DPT.bSetBlock]
86 push ax
87
88;--------------------------------------------------------------------
89; PushBusType
90; Parameters:
91; DS:DI: Ptr to DPT
92; ES:BX: Ptr to BOOTNFO
93; CS:SI: Ptr to IDEVARS
94; Returns:
95; Nothing (jumps to next push below)
96; Corrupts registers:
97; AX, DX
98;--------------------------------------------------------------------
99PushBusType:
100 xchg ax, bx ; Store BX to AX
101 eMOVZX bx, BYTE [cs:si+IDEVARS.bBusType]
102 mov bx, [cs:bx+.rgwBusTypeValues] ; Char to BL, Int to BH
103 eMOVZX dx, bh
104 push bx ; Push character
105 push dx ; Push 8, 16 or 32
106 xchg bx, ax ; Restore BX
107 jmp SHORT .NextPush
108ALIGN WORD_ALIGN
109.rgwBusTypeValues:
110 db 'D', 8 ; BUS_TYPE_8_DUAL
111 db ' ', 16 ; BUS_TYPE_16
112 db ' ', 32 ; BUS_TYPE_32
113 db 'S', 8 ; BUS_TYPE_8_SINGLE
114ALIGN JUMP_ALIGN
115.NextPush:
116
117;--------------------------------------------------------------------
118; PushIRQ
119; Parameters:
120; DS:DI: Ptr to DPT
121; ES:BX: Ptr to BOOTNFO
122; CS:SI: Ptr to IDEVARS
123; Returns:
124; Nothing (falls to next push below)
125; Corrupts registers:
126; AX, DX
127;--------------------------------------------------------------------
128PushIRQ:
129 mov dl, ' ' ; Load space to DL
130 mov al, [cs:si+IDEVARS.bIRQ]
131 test al, al ; Interrupts disabled?
132 jz SHORT .PushIrqDisabled
133 add al, '0' ; Digit to ASCII
134 cmp al, '9' ; Only one digit needed?
135 jbe SHORT .PushCharacters
136
137 ; Two digits needed
138 sub al, 10 ; Limit to single digit ASCII
139 mov dl, '1' ; Load '1 to DX
140 jmp SHORT .PushCharacters
141ALIGN JUMP_ALIGN
142.PushIrqDisabled:
143 mov al, '-' ; Load line to AL
144 xchg ax, dx ; Space to AL, line to DL
145ALIGN JUMP_ALIGN
146.PushCharacters:
147 push dx
148 push ax
149
150;--------------------------------------------------------------------
151; PushResetStatus
152; Parameters:
153; DS:DI: Ptr to DPT
154; ES:BX: Ptr to BOOTNFO
155; CS:SI: Ptr to IDEVARS
156; Returns:
157; Nothing (falls to next push below)
158; Corrupts registers:
159; AX
160;--------------------------------------------------------------------
161PushResetStatus:
162 eMOVZX ax, BYTE [di+DPT.bReset]
163 push ax
164
165;--------------------------------------------------------------------
166; PrintValuesFromStack
167; Parameters:
168; Stack: All formatting parameters
169; Returns:
170; Nothing
171; Corrupts registers:
172; AX, SI, DI
173;--------------------------------------------------------------------
174PrintValuesFromStack:
175 mov si, g_szCfgFormat
176 jmp BootMenuPrint_FormatCSSIfromParamsInSSBP
177
178
179;--------------------------------------------------------------------
180; BootMenuPrintCfg_GetPointers
181; Parameters:
182; DS:DI: Ptr to DPT
183; Returns:
184; DS:DI: Ptr to DPT
185; ES:BX: Ptr to BOOTNFO
186; CS:SI: Ptr to IDEVARS
187; Corrupts registers:
188; AX, DL
189;--------------------------------------------------------------------
190ALIGN JUMP_ALIGN
191BootMenuPrintCfg_GetPointers:
192 mov dl, [di+DPT.bDrvNum] ; Load Drive number to DL
193 call BootInfo_GetOffsetToBX ; ES:BX now points...
194 LOAD_BDA_SEGMENT_TO es, ax, ! ; ...to BOOTNFO
195 mov al, [di+DPT.bIdeOff]
196 xchg si, ax ; CS:SI now points to IDEVARS
197 ret
Note: See TracBrowser for help on using the repository browser.