source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenuPrintCfg.asm@ 190

Last change on this file since 190 was 186, checked in by gregli@…, 13 years ago

Initial string compression checkin. All changes are under MODULE_STRINGS_COMPRESSED, and this can still be turned off. With this checkin, the serial and ebios code can both be turned on at the same time and still we remain below the 8K boundary (barely). I still need to chekin StringsCompress.pl after some more code cleanup. The output, in StringsCompressed.asm is checked in here, and should continue be to checkin when Strings.asm is changed, for those who do not have/want to run the Perl script to recreate it.
File size: 3.8 KB
RevLine 
[88]1; Project name : XTIDE Universal BIOS
[3]2; Description : Functions for printing drive configuration
3; information on Boot Menu.
4
5; Section containing code
6SECTION .text
7
8;--------------------------------------------------------------------
9; Prints Hard Disk configuration for drive handled by our BIOS.
10; Cursor is set to configuration header string position.
11;
12; BootMenuPrintCfg_ForOurDrive
13; Parameters:
[127]14; DS: Segment to DPT
15; Stack: Offset to DPT
[3]16; Returns:
17; Nothing
18; Corrupts registers:
[150]19; AX, BX, CX, DX, SI, DI
[3]20;--------------------------------------------------------------------
21ALIGN JUMP_ALIGN
22BootMenuPrintCfg_ForOurDrive:
[96]23 mov si, g_szCfgHeader
24 call BootMenuPrint_NullTerminatedStringFromCSSIandSetCF
[186]25 pop di
[150]26 eMOVZX ax, BYTE [di+DPT.bIdevarsOffset]
27 xchg si, ax ; CS:SI now points to IDEVARS
[96]28 ; Fall to PushAndFormatCfgString
[3]29
30;--------------------------------------------------------------------
[96]31; PushAndFormatCfgString
[3]32; Parameters:
33; DS:DI: Ptr to DPT
34; CS:SI: Ptr to IDEVARS
35; Returns:
36; Nothing
37; Corrupts registers:
[88]38; AX, DX, SI, DI
[3]39;--------------------------------------------------------------------
[96]40PushAndFormatCfgString:
[88]41 push bp
42 mov bp, sp
[3]43 ; Fall to first push below
44
45;--------------------------------------------------------------------
[88]46; PushAddressingMode
[3]47; Parameters:
48; DS:DI: Ptr to DPT
49; CS:SI: Ptr to IDEVARS
50; Returns:
[88]51; Nothing (jumps to next push below)
[3]52; Corrupts registers:
[96]53; AX
[3]54;--------------------------------------------------------------------
[88]55PushAddressingMode:
[150]56 call AccessDPT_GetAddressingModeForWordLookToBX
[182]57 mov al,g_szAddressingModes_Displacement
58 mul bl
59 add ax,g_szAddressingModes
60 push ax
61
[3]62;--------------------------------------------------------------------
[88]63; PushBlockMode
[3]64; Parameters:
65; DS:DI: Ptr to DPT
66; CS:SI: Ptr to IDEVARS
67; Returns:
68; Nothing (falls to next push below)
69; Corrupts registers:
[88]70; AX
[3]71;--------------------------------------------------------------------
[88]72PushBlockMode:
[150]73 mov ax, 1
[158]74 test BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED
[150]75 jz SHORT .PushBlockSizeFromAX
76 mov al, [di+DPT_ATA.bSetBlock]
77.PushBlockSizeFromAX:
[3]78 push ax
79
80;--------------------------------------------------------------------
[88]81; PushBusType
[3]82; Parameters:
83; DS:DI: Ptr to DPT
84; CS:SI: Ptr to IDEVARS
85; Returns:
86; Nothing (jumps to next push below)
87; Corrupts registers:
88; AX, DX
89;--------------------------------------------------------------------
[181]90;PushBusType:
[182]91 mov al,g_szBusTypeValues_Displacement
92 mul BYTE [cs:si+IDEVARS.bDevice]
[186]93
94 shr ax,1 ; divide by 2 since IDEVARS.bDevice is multiplied by 2
95
[182]96 add ax,g_szBusTypeValues
97 push ax
98
[3]99;--------------------------------------------------------------------
[88]100; PushIRQ
[3]101; Parameters:
102; DS:DI: Ptr to DPT
103; CS:SI: Ptr to IDEVARS
104; Returns:
105; Nothing (falls to next push below)
106; Corrupts registers:
[88]107; AX, DX
[3]108;--------------------------------------------------------------------
[88]109PushIRQ:
[184]110 eMOVZX ax, BYTE [cs:si+IDEVARS.bIRQ]
[3]111 push ax
112
113;--------------------------------------------------------------------
[88]114; PushResetStatus
[3]115; Parameters:
116; DS:DI: Ptr to DPT
117; CS:SI: Ptr to IDEVARS
118; Returns:
[88]119; Nothing (falls to next push below)
[3]120; Corrupts registers:
[88]121; AX
[3]122;--------------------------------------------------------------------
[88]123PushResetStatus:
[158]124 mov al, [di+DPT.bFlagsHigh]
125 and ax, MASKH_DPT_RESET
[88]126 push ax
[3]127
128;--------------------------------------------------------------------
[96]129; PrintValuesFromStack
[3]130; Parameters:
131; Stack: All formatting parameters
132; Returns:
133; Nothing
134; Corrupts registers:
[88]135; AX, SI, DI
[3]136;--------------------------------------------------------------------
[96]137PrintValuesFromStack:
[3]138 mov si, g_szCfgFormat
[127]139 jmp BootMenuPrint_FormatCSSIfromParamsInSSBP
[96]140
Note: See TracBrowser for help on using the repository browser.