source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Boot/BootMenuPrintCfg.asm@ 169

; Project name  :   XTIDE Universal BIOS
; Description   :   Functions for printing drive configuration
;                   information on Boot Menu.

; Section containing code
SECTION .text

;--------------------------------------------------------------------
; Prints Hard Disk configuration for drive handled by our BIOS.
; Cursor is set to configuration header string position.
;
; BootMenuPrintCfg_ForOurDrive
;   Parameters:
;       DS:     Segment to DPT
;       Stack:  Offset to DPT
;   Returns:
;       Nothing
;   Corrupts registers:
;       AX, BX, CX, DX, SI, DI
;--------------------------------------------------------------------
ALIGN JUMP_ALIGN
BootMenuPrintCfg_ForOurDrive:
    pop     di
    mov     si, g_szCfgHeader
    call    BootMenuPrint_NullTerminatedStringFromCSSIandSetCF
    eMOVZX  ax, BYTE [di+DPT.bIdevarsOffset]
    xchg    si, ax                      ; CS:SI now points to IDEVARS
    ; Fall to PushAndFormatCfgString

;--------------------------------------------------------------------
; PushAndFormatCfgString
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing
;   Corrupts registers:
;       AX, DX, SI, DI
;--------------------------------------------------------------------
PushAndFormatCfgString:
    push    bp
    mov     bp, sp
    ; Fall to first push below

;--------------------------------------------------------------------
; PushAddressingMode
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing (jumps to next push below)
;   Corrupts registers:
;       AX
;--------------------------------------------------------------------
PushAddressingMode:
    call    AccessDPT_GetAddressingModeForWordLookToBX
    push    WORD [cs:bx+rgszAddressingModeString]

;--------------------------------------------------------------------
; PushBlockMode
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing (falls to next push below)
;   Corrupts registers:
;       AX
;--------------------------------------------------------------------
PushBlockMode:
    mov     ax, 1
    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED
    jz      SHORT .PushBlockSizeFromAX
    mov     al, [di+DPT_ATA.bSetBlock]
.PushBlockSizeFromAX:
    push    ax

;--------------------------------------------------------------------
; PushBusType
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing (jumps to next push below)
;   Corrupts registers:
;       AX, DX
;--------------------------------------------------------------------
PushBusType:
    xchg    ax, bx      ; Store BX to AX
    eMOVZX  bx, BYTE [cs:si+IDEVARS.bDevice]
    mov     bx, [cs:bx+rgwBusTypeValues]    ; Char to BL, Int to BH
    eMOVZX  dx, bh
    push    bx          ; Push character
    push    dx          ; Push 1, 8, 16 or 32
    xchg    bx, ax      ; Restore BX

;--------------------------------------------------------------------
; PushIRQ
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing (falls to next push below)
;   Corrupts registers:
;       AX, DX
;--------------------------------------------------------------------
PushIRQ:
    mov     dl, ' '                     ; Load space to DL
    mov     al, [cs:si+IDEVARS.bIRQ]
    test    al, al                      ; Interrupts disabled?
    jz      SHORT .PushIrqDisabled
    add     al, '0'                     ; Digit to ASCII
    cmp     al, '9'                     ; Only one digit needed?
    jbe     SHORT .PushCharacters

    ; Two digits needed
    sub     al, 10                      ; Limit to single digit ASCII
    mov     dl, '1'                     ; Load '1 to DX
    jmp     SHORT .PushCharacters
ALIGN JUMP_ALIGN
.PushIrqDisabled:
    mov     al, '-'                     ; Load line to AL
    xchg    ax, dx                      ; Space to AL, line to DL
ALIGN JUMP_ALIGN
.PushCharacters:
    push    dx
    push    ax

;--------------------------------------------------------------------
; PushResetStatus
;   Parameters:
;       DS:DI:  Ptr to DPT
;       CS:SI:  Ptr to IDEVARS
;   Returns:
;       Nothing (falls to next push below)
;   Corrupts registers:
;       AX
;--------------------------------------------------------------------
PushResetStatus:
    mov     al, [di+DPT.bFlagsHigh]
    and     ax, MASKH_DPT_RESET
    push    ax

;--------------------------------------------------------------------
; PrintValuesFromStack
;   Parameters:
;       Stack:  All formatting parameters
;   Returns:
;       Nothing
;   Corrupts registers:
;       AX, SI, DI
;--------------------------------------------------------------------
PrintValuesFromStack:
    mov     si, g_szCfgFormat
    jmp     BootMenuPrint_FormatCSSIfromParamsInSSBP


ALIGN WORD_ALIGN
rgszAddressingModeString:
    dw      g_szLCHS
    dw      g_szPCHS
    dw      g_szLBA28
    dw      g_szLBA48

rgwBusTypeValues:
    db      'D', 8      ; DEVICE_8BIT_DUAL_PORT_XTIDE
    db      'X', 8      ; DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0
    db      'S', 8      ; DEVICE_8BIT_SINGLE_PORT
    db      ' ', 16     ; DEVICE_16BIT_ATA
    db      ' ', 32     ; DEVICE_32BIT_ATA
    db      ' ', 1      ; DEVICE_SERIAL_PORT