source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Inc/RomVars.inc @ 473

Last change on this file since 473 was 473, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Large changes to prepare full XT-CF support (DMA not yet implemented and memory mapped transfers are not working).
File size: 7.5 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Defines for ROMVARS struct containing variables stored
3;                   in BIOS ROM.
4
5;
6; XTIDE Universal BIOS and Associated Tools
7; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
8;
9; This program is free software; you can redistribute it and/or modify
10; it under the terms of the GNU General Public License as published by
11; the Free Software Foundation; either version 2 of the License, or
12; (at your option) any later version.
13;
14; This program is distributed in the hope that it will be useful,
15; but WITHOUT ANY WARRANTY; without even the implied warranty of
16; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17; GNU General Public License for more details.
18; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
19;
20
21%ifndef ROMVARS_INC
22%define ROMVARS_INC
23
24; ROM Variables. Written to the ROM image before flashing.
25struc ROMVARS
26    .wRomSign           resb    2   ; ROM Signature (AA55h)
27    .bRomSize           resb    1   ; ROM size in 512 byte blocks
28    .rgbJump            resb    3   ; First instruction to ROM init (jmp)
29
30    .rgbSign            resb    8   ; Signature for XTIDE Configurator Program
31    .szTitle            resb    31  ; BIOS title string
32    .szVersion          resb    25  ; BIOS version string
33
34    .wFlags             resb    2   ; Word for ROM flags
35    .wDisplayMode       resb    2   ; Display mode for boot menu
36    .wBootTimeout       resb    2   ; Boot Menu selection timeout in system timer ticks
37    .bIdeCnt            resb    1   ; Number of available IDE controllers
38    .bBootDrv           resb    1   ; Default drive to boot from
39    .bMinFddCnt         resb    1   ; Minimum number of Floppy Drives
40    .bStealSize         resb    1   ; Number of 1kB blocks stolen from 640kB base RAM
41    .bIdleTimeout       resb    1   ; Standby timer value
42
43    .ideVarsBegin:
44    .ideVars0           resb    IDEVARS_size
45    .ideVars1           resb    IDEVARS_size
46    .ideVars2           resb    IDEVARS_size
47    .ideVars3           resb    IDEVARS_size
48
49%ifdef MODULE_SERIAL
50    .ideVarsSerialAuto  resb    IDEVARS_size
51%endif
52
53    .ideVarsEnd:
54endstruc
55
56%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
57    %if ROMVARS.ideVarsEnd & 0xff00 <> 0
58        %error ".ideVars structures must fit within the first 256 bytes of the ROM image"
59    %endif
60    %if (ROMVARS.ideVarsEnd - ROMVARS.ideVarsBegin) = 0
61        %error "there must be at least one .ideVars structure, it would be bizarre if this were not true, but it is assumed in the ah0h reset code."
62    %endif
63%endif
64
65; Bit defines for ROMVARS.wFlags
66FLG_ROMVARS_FULLMODE                EQU (1<<0)  ; Full operating mode (steals base RAM, supports EBIOS etc.)
67FLG_ROMVARS_SERIAL_SCANDETECT       EQU (1<<3)  ; Scan COM ports at the end of drive detection.  Can also be invoked
68                                                ; by holding down the ALT key at the end of drive detection.
69                                                ; (Conveniently, this is 8, a fact we exploit when testing the bit)
70
71; Here in case the configuration needs to know functionality is present
72FLG_ROMVARS_MODULE_FEATURE_SETS         EQU (1<<5)
73FLG_ROMVARS_MODULE_8BIT_IDE             EQU (1<<6)
74
75FLG_ROMVARS_MODULE_ADVANCED_ATA         EQU (1<<8)
76FLG_ROMVARS_MODULE_BOOT_MENU            EQU (1<<9)
77FLG_ROMVARS_MODULE_EBIOS                EQU (1<<10)
78FLG_ROMVARS_MODULE_HOTKEYS              EQU (1<<11)
79FLG_ROMVARS_MODULE_IRQ                  EQU (1<<12)
80FLG_ROMVARS_MODULE_SERIAL               EQU (1<<13)
81FLG_ROMVARS_MODULE_SERIAL_FLOPPY        EQU (1<<14)
82FLG_ROMVARS_MODULE_STRINGS_COMPRESSED   EQU (1<<15)
83
84
85; Boot Menu Display Modes (see Assembly Library Display.inc for standard modes)
86DEFAULT_TEXT_MODE       EQU 4
87
88
89; Controller specific variables
90struc IDEVARS
91;;; Word 0
92    .wSerialPortAndBaud:                    ; Serial connection port (low, divided by 4) and baud rate divisor (high)
93    .wBasePort:                             ; IDE Base Port for Command Block (usual) Registers
94    .bSerialPort                resb    1
95    .bSerialBaud                resb    1
96
97;;; Word 1
98    .wControlBlockPort:
99    .bXTCFcontrolRegister:                  ; XT-CF autodetects ports
100    .bSerialUnused              resb    1   ; IDE Base Port for Control Block Registers
101
102    .wSerialCOMPortCharAndDevice:           ; In DetectPrint, we grab the COM Port char and Device at the same time
103    .bSerialCOMPortChar         resb    1   ; Serial connection COM port number/letter
104
105;;; Word 2
106    .bDevice                    resb    1   ; Device type
107    .bIRQ                       resb    1   ; Interrupt Request Number
108
109;;; And more...
110    .drvParamsMaster            resb    DRVPARAMS_size
111    .drvParamsSlave             resb    DRVPARAMS_size
112endstruc
113
114%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
115    %if IDEVARS.bSerialCOMPortChar+1 != IDEVARS.bDevice
116        %error "IDEVARS.bSerialCOMPortChar needs to come immediately before IDEVARS.bDevice so that both bytes can be fetched at the same time inside DetectPrint.asm"
117    %endif
118%endif
119
120; Default values for Port and PortCtrl, shared with the configurator
121;
122DEVICE_XTIDE_DEFAULT_PORT               EQU     300h
123DEVICE_XTIDE_DEFAULT_PORTCTRL           EQU     (DEVICE_XTIDE_DEFAULT_PORT + 8h)
124
125DEVICE_ATA_PRIMARY_PORT                 EQU     1F0h
126DEVICE_ATA_PRIMARY_PORTCTRL             EQU     (DEVICE_ATA_PRIMARY_PORT + 200h)
127
128DEVICE_ATA_SECONDARY_PORT               EQU     170h
129DEVICE_ATA_SECONDARY_PORTCTRL           EQU     (DEVICE_ATA_SECONDARY_PORT + 200h)
130
131DEVICE_ATA_TERTIARY_PORT                EQU     1E8h
132DEVICE_ATA_TERTIARY_PORTCTRL            EQU     (DEVICE_ATA_TERTIARY_PORT + 200h)
133
134DEVICE_ATA_QUATERNARY_PORT              EQU     168h
135DEVICE_ATA_QUATERNARY_PORTCTRL          EQU     (DEVICE_ATA_QUATERNARY_PORT + 200h)
136
137
138; Device types for IDEVARS.bDevice
139; IDE Devices are grouped so device numbers cannot be changed without modifying code elsewhere!
140;
141COUNT_OF_STANDARD_IDE_DEVICES           EQU 2
142COUNT_OF_8BIT_IDE_DEVICES               EQU 6
143COUNT_OF_ALL_IDE_DEVICES                EQU (COUNT_OF_8BIT_IDE_DEVICES + COUNT_OF_STANDARD_IDE_DEVICES)
144; Standard port mapped I/O
145DEVICE_16BIT_ATA                        EQU (0<<1)
146DEVICE_32BIT_ATA                        EQU (1<<1)
147DEVICE_8BIT_XTIDE_REV1                  EQU (COUNT_OF_STANDARD_IDE_DEVICES<<1)
148; Address lines A0 and A3 are swapped
149DEVICE_8BIT_XTIDE_REV2                  EQU ((COUNT_OF_STANDARD_IDE_DEVICES+1)<<1)  ; Or rev 1 with swapped A0 and A3
150; IDE Register offsets are SHL 1
151DEVICE_8BIT_XTCF_PIO8                   EQU ((COUNT_OF_STANDARD_IDE_DEVICES+2)<<1)  ; XT-CF using 8-bit PIO mode
152DEVICE_8BIT_XTCF_DMA                    EQU ((COUNT_OF_STANDARD_IDE_DEVICES+3)<<1)  ; XT-CF using DMA
153DEVICE_8BIT_XTCF_MEMMAP                 EQU ((COUNT_OF_STANDARD_IDE_DEVICES+4)<<1)  ; XT-CF using Memory Mapped transfers (not I/O)
154; Memory Mapped I/O
155DEVICE_8BIT_JRIDE_ISA                   EQU ((COUNT_OF_STANDARD_IDE_DEVICES+5)<<1)  ; JR-IDE/ISA (Memory Mapped I/O)
156; Virtual devices
157DEVICE_SERIAL_PORT                      EQU (COUNT_OF_ALL_IDE_DEVICES<<1)
158
159
160
161; Master/Slave drive specific parameters
162struc DRVPARAMS
163    .wFlags         resb    2   ; Drive flags
164    .dwMaximumLBA:              ; User specified maximum number of sectors
165    .wCylinders     resb    2   ; User specified cylinders (1...16383)
166    .wHeadsAndSectors:
167    .bHeads         resb    1   ; User specified Heads (1...16)
168    .bSect          resb    1   ; User specified Sectors per track (1...63)
169endstruc
170
171; Bit defines for DRVPARAMS.wFlags
172MASK_DRVPARAMS_WRITECACHE       EQU (3<<0)  ; Bits 0...1, Drive internal write cache settings (must start at bit 0)
173    DEFAULT_WRITE_CACHE             EQU 0   ; Must be 0
174    DISABLE_WRITE_CACHE             EQU 1
175    ENABLE_WRITE_CACHE              EQU 2
176MASK_DRVPARAMS_TRANSLATEMODE    EQU (3<<TRANSLATEMODE_FIELD_POSITION)   ; Bits 2...3, Position shared with DPT
177    TRANSLATEMODE_FIELD_POSITION    EQU 2
178    TRANSLATEMODE_NORMAL            EQU 0
179    TRANSLATEMODE_LARGE             EQU 1
180    TRANSLATEMODE_ASSISTED_LBA      EQU 2   ; 28-bit or 48-bit LBA
181    TRANSLATEMODE_AUTO              EQU 3   ; Only available in ROMVARS, not in DPTs
182FLG_DRVPARAMS_BLOCKMODE         EQU (1<<4)  ; Enable Block mode transfers
183FLG_DRVPARAMS_USERCHS           EQU (1<<5)  ; User specified P-CHS values
184    MAX_USER_CYLINDERS              EQU 16383
185    MAX_USER_HEADS                  EQU 16
186    MAX_USER_SECTORS_PER_TRACK      EQU 63
187FLG_DRVPARAMS_USERLBA           EQU (1<<6)  ; User specified LBA value
188    MIN_USER_LBA_COUNT              EQU ((MAX_USER_CYLINDERS*MAX_USER_HEADS*MAX_USER_SECTORS_PER_TRACK)+1)
189    MAX_USER_LBA_COUNT              EQU ((2^28)-1)
190
191
192%endif ; ROMVARS_INC
Note: See TracBrowser for help on using the repository browser.