| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Defines for ROMVARS struct containing variables stored
|
|---|
| 3 | ; in BIOS ROM.
|
|---|
| 4 | %ifndef ROMVARS_INC
|
|---|
| 5 | %define ROMVARS_INC
|
|---|
| 6 |
|
|---|
| 7 | ; ROM Variables. Written to the ROM image before flashing.
|
|---|
| 8 | struc ROMVARS
|
|---|
| 9 | .wRomSign resb 2 ; ROM Signature (AA55h)
|
|---|
| 10 | .bRomSize resb 1 ; ROM size in 512 byte blocks
|
|---|
| 11 | .rgbJump resb 3 ; First instruction to ROM init (jmp)
|
|---|
| 12 |
|
|---|
| 13 | .rgbSign resb 8 ; Signature for XTIDE Configurator Program
|
|---|
| 14 | .szTitle resb 31 ; BIOS title string
|
|---|
| 15 | .szVersion resb 25 ; BIOS version string
|
|---|
| 16 |
|
|---|
| 17 | .wFlags resb 2 ; Word for ROM flags
|
|---|
| 18 | .wDisplayMode resb 2 ; Display mode for boot menu
|
|---|
| 19 | .wBootTimeout resb 2 ; Boot Menu selection timeout in system timer ticks
|
|---|
| 20 | .bIdeCnt resb 1 ; Number of available IDE controllers
|
|---|
| 21 | .bBootDrv resb 1 ; Boot Menu default drive
|
|---|
| 22 | .bMinFddCnt resb 1 ; Minimum number of Floppy Drives
|
|---|
| 23 | .bStealSize resb 1 ; Number of 1kB blocks stolen from 640kB base RAM
|
|---|
| 24 |
|
|---|
| 25 | .ideVars0 resb IDEVARS_size
|
|---|
| 26 | .ideVars1 resb IDEVARS_size
|
|---|
| 27 | .ideVars2 resb IDEVARS_size
|
|---|
| 28 | .ideVars3 resb IDEVARS_size
|
|---|
| 29 |
|
|---|
| 30 | %ifdef MODULE_SERIAL
|
|---|
| 31 | .ideVarsSerialAuto resb IDEVARS_size
|
|---|
| 32 | %endif
|
|---|
| 33 | endstruc
|
|---|
| 34 |
|
|---|
| 35 | ; Bit defines for ROMVARS.wFlags
|
|---|
| 36 | FLG_ROMVARS_FULLMODE EQU (1<<0) ; Full operating mode (steals base RAM, supports EBIOS etc.)
|
|---|
| 37 | FLG_ROMVARS_DRVXLAT EQU (1<<2) ; Enable drive number translation
|
|---|
| 38 | FLG_ROMVARS_SERIAL_SCANDETECT EQU (1<<3) ; Scan COM ports at the end of drive detection. Can also be invoked
|
|---|
| 39 | ; by holding down the ALT key at the end of drive detection.
|
|---|
| 40 | ; (Conveniently, this is 8, a fact we exploit when testing the bit)
|
|---|
| 41 | FLG_ROMVARS_MODULE_SERIAL EQU (1<<6) ; Here in case the configuration needs to know functionality is present
|
|---|
| 42 | FLG_ROMVARS_MODULE_EBIOS EQU (1<<7) ; Here in case the configuration needs to know functionality is present
|
|---|
| 43 |
|
|---|
| 44 | ; Boot Menu Display Modes (see Assembly Library Display.inc for standard modes)
|
|---|
| 45 | DEFAULT_TEXT_MODE EQU 4
|
|---|
| 46 |
|
|---|
| 47 |
|
|---|
| 48 | ; Controller specific variables
|
|---|
| 49 | struc IDEVARS
|
|---|
| 50 | .wPort: ; IDE Base Port for Command Block (usual) Registers
|
|---|
| 51 | .bSerialCOMDigit resb 1 ; Serial Device COM Port digit
|
|---|
| 52 | .bSerialPackedPortAndBaud resb 1 ; Serial Device packed port and baud
|
|---|
| 53 |
|
|---|
| 54 | .wPortCtrl: ; IDE Base Port for Control Block Registers
|
|---|
| 55 | .wSerialPackedPrintBaud resb 2 ; Serial Device packed baud rate for printing
|
|---|
| 56 |
|
|---|
| 57 | .bDevice resb 1 ; Device type
|
|---|
| 58 | .bIRQ resb 1 ; Interrupt Request Number
|
|---|
| 59 | .drvParamsMaster resb DRVPARAMS_size
|
|---|
| 60 | .drvParamsSlave resb DRVPARAMS_size
|
|---|
| 61 | endstruc
|
|---|
| 62 |
|
|---|
| 63 | ; Default values for Port and PortCtrl, shared with the configurator
|
|---|
| 64 | ;
|
|---|
| 65 | DEVICE_XTIDE_DEFAULT_PORT EQU 300h
|
|---|
| 66 | DEVICE_XTIDE_DEFAULT_PORTCTRL EQU 308h
|
|---|
| 67 | DEVICE_ATA_DEFAULT_PORT EQU 1F0h
|
|---|
| 68 | DEVICE_ATA_DEFAULT_PORTCTRL EQU 3F0h
|
|---|
| 69 | DEVICE_SERIAL_DEFAULT_COM EQU 0 ; COM1
|
|---|
| 70 | DEVICE_SERIAL_DEFAULT_BAUD EQU 1 ; 9600
|
|---|
| 71 |
|
|---|
| 72 | ; Device types for IDEVARS.bDevice
|
|---|
| 73 | ;
|
|---|
| 74 | DEVICE_8BIT_DUAL_PORT_XTIDE EQU (0<<1)
|
|---|
| 75 | DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0 EQU (1<<1)
|
|---|
| 76 | DEVICE_8BIT_SINGLE_PORT EQU (2<<1)
|
|---|
| 77 | DEVICE_16BIT_ATA EQU (3<<1)
|
|---|
| 78 | DEVICE_32BIT_ATA EQU (4<<1)
|
|---|
| 79 | DEVICE_SERIAL_PORT EQU (5<<1)
|
|---|
| 80 |
|
|---|
| 81 |
|
|---|
| 82 | ; Master/Slave drive specific parameters
|
|---|
| 83 | struc DRVPARAMS
|
|---|
| 84 | .wFlags resb 2 ; Drive flags
|
|---|
| 85 | .wCylinders resb 2 ; User specified cylinders (1...16383)
|
|---|
| 86 | .wHeadsAndSectors:
|
|---|
| 87 | .bHeads resb 1 ; User specified Heads (1...16)
|
|---|
| 88 | .bSect resb 1 ; User specified Sectors per track (1...63)
|
|---|
| 89 | endstruc
|
|---|
| 90 |
|
|---|
| 91 | ; Bit defines for DRVPARAMS.wFlags
|
|---|
| 92 | FLG_DRVPARAMS_USERCHS EQU (1<<0) ; User specified P-CHS values
|
|---|
| 93 | FLG_DRVPARAMS_BLOCKMODE EQU (1<<1) ; Enable Block mode transfers
|
|---|
| 94 |
|
|---|
| 95 |
|
|---|
| 96 | ; Defines for IDEVARS.bSerialPackedPortAndBaud (same format used by DPT.bSerialPortAndBaud)
|
|---|
| 97 | ;
|
|---|
| 98 | ; pppp ppbb
|
|---|
| 99 | ; i/o port address = p * 2 + 240h
|
|---|
| 100 | ; baud rate = b, where 00 = 2400, 01 = 9600, 10 = 38.4K, 11 = 115.2K
|
|---|
| 101 | ;
|
|---|
| 102 | ; 240h/2400baud corresponds to 0 for a PackedPortAndBaud value, which is reserved (in case we need
|
|---|
| 103 | ; it to know if a value has been set). Which is why ..._MINPORT is 248h.
|
|---|
| 104 | ;
|
|---|
| 105 | DEVICE_SERIAL_PACKEDPORTANDBAUD_PORTMASK EQU 0fch
|
|---|
| 106 | DEVICE_SERIAL_PACKEDPORTANDBAUD_PORTBITS EQU 03fh
|
|---|
| 107 | DEVICE_SERIAL_PACKEDPORTANDBAUD_PORT_FIELD_POSITION EQU 2
|
|---|
| 108 | DEVICE_SERIAL_PACKEDPORTANDBAUD_STARTINGPORT EQU 240h
|
|---|
| 109 | DEVICE_SERIAL_PACKEDPORTANDBAUD_MINPORT EQU 248h ; minimum port value that the user can set
|
|---|
| 110 | DEVICE_SERIAL_PACKEDPORTANDBAUD_MAXPORT EQU 438h ; or (..._PORTMASK << 1) + ..._STARTINGPORT
|
|---|
| 111 |
|
|---|
| 112 | DEVICE_SERIAL_PACKEDPORTANDBAUD_BAUDMASK EQU 3h
|
|---|
| 113 | DEVICE_SERIAL_PACKEDPORTANDBAUD_BAUDBITS EQU 3h
|
|---|
| 114 | DEVICE_SERIAL_PACKEDPORTANDBAUD_BAUD_FIELD_POSITION EQU 0
|
|---|
| 115 |
|
|---|
| 116 | ; Defines for IDEVARS.wSerialPrintBaud
|
|---|
| 117 | ;
|
|---|
| 118 | ; pppp ppnn nnnn nnnn
|
|---|
| 119 | ; unsigned number to output = n
|
|---|
| 120 | ; postfix character = p + '0' (designed for '0' and 'K', although other values are possible)
|
|---|
| 121 | ;
|
|---|
| 122 | ; Note that the contents of this word is only used for printing by the BIOS when a drive is detected.
|
|---|
| 123 | ; It is not used for any other purpose, and so long as it conforms to the structure, any values can be used.
|
|---|
| 124 | ;
|
|---|
| 125 | DEVICE_SERIAL_PRINTBAUD_NUMBERMASK EQU 003ffh
|
|---|
| 126 | DEVICE_SERIAL_PRINTBAUD_POSTCHARMASK EQU 0fc00h
|
|---|
| 127 | DEVICE_SERIAL_PRINTBAUD_POSTCHARADD EQU '0'
|
|---|
| 128 | ;
|
|---|
| 129 | ; These are defined here (instead of in the configurator) for consistency since they could also be used
|
|---|
| 130 | ; in main.asm as a default for an IDEVARS structure.
|
|---|
| 131 | ;
|
|---|
| 132 | DEVICE_SERIAL_PRINTBAUD_2400 EQU ((('0'-DEVICE_SERIAL_PRINTBAUD_POSTCHARADD)<<10) | 240) ; Prints "2400"
|
|---|
| 133 | DEVICE_SERIAL_PRINTBAUD_9600 EQU ((('0'-DEVICE_SERIAL_PRINTBAUD_POSTCHARADD)<<10) | 960) ; Prints "9600"
|
|---|
| 134 | DEVICE_SERIAL_PRINTBAUD_38_4 EQU ((('K'-DEVICE_SERIAL_PRINTBAUD_POSTCHARADD)<<10) | 38) ; Prints "38K"
|
|---|
| 135 | DEVICE_SERIAL_PRINTBAUD_115_2 EQU ((('K'-DEVICE_SERIAL_PRINTBAUD_POSTCHARADD)<<10) | 115) ; Prints "115K"
|
|---|
| 136 |
|
|---|
| 137 | ;
|
|---|
| 138 | ; COM Number to I/O Port Address Mapping
|
|---|
| 139 | ;
|
|---|
| 140 | ; COM Number: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
|
|---|
| 141 | ; Corresponds to I/O port: 3f8, 2f8, 3e8, 2e8, 2f0, 3e0, 2e0, 260, 368, 268, 360, 270
|
|---|
| 142 | ; Corresponds to Packed I/O port (hex): 37, 17, 35, 15, 16, 34, 14, 4, 25, 5, 24, 6
|
|---|
| 143 | ;
|
|---|
| 144 | DEVICE_SERIAL_COM1 EQU 3f8h
|
|---|
| 145 | DEVICE_SERIAL_COM2 EQU 2f8h
|
|---|
| 146 | DEVICE_SERIAL_COM3 EQU 3e8h
|
|---|
| 147 | DEVICE_SERIAL_COM4 EQU 2e8h
|
|---|
| 148 | DEVICE_SERIAL_COM5 EQU 2f0h
|
|---|
| 149 | DEVICE_SERIAL_COM6 EQU 3e0h
|
|---|
| 150 | DEVICE_SERIAL_COM7 EQU 2e0h
|
|---|
| 151 | DEVICE_SERIAL_COM8 EQU 260h
|
|---|
| 152 | DEVICE_SERIAL_COM9 EQU 368h
|
|---|
| 153 | DEVICE_SERIAL_COMA EQU 268h
|
|---|
| 154 | DEVICE_SERIAL_COMB EQU 360h
|
|---|
| 155 | DEVICE_SERIAL_COMC EQU 270h
|
|---|
| 156 |
|
|---|
| 157 |
|
|---|
| 158 | %endif ; ROMVARS_INC
|
|---|
