| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Defines for ROMVARS struct containing variables stored
|
|---|
| 3 | ; in BIOS ROM.
|
|---|
| 4 | %ifndef ROMVARS_INC
|
|---|
| 5 | %define ROMVARS_INC
|
|---|
| 6 |
|
|---|
| 7 | ; ROM Variables. Written to the ROM image before flashing.
|
|---|
| 8 | struc ROMVARS
|
|---|
| 9 | .wRomSign resb 2 ; ROM Signature (AA55h)
|
|---|
| 10 | .bRomSize resb 1 ; ROM size in 512 byte blocks
|
|---|
| 11 | .rgbJump resb 3 ; First instruction to ROM init (jmp)
|
|---|
| 12 |
|
|---|
| 13 | .rgbSign resb 8 ; Signature for XTIDE Configurator Program
|
|---|
| 14 | .szTitle resb 31 ; BIOS title string
|
|---|
| 15 | .szVersion resb 25 ; BIOS version string
|
|---|
| 16 |
|
|---|
| 17 | .wFlags resb 2 ; Word for ROM flags
|
|---|
| 18 | .wDisplayMode resb 2 ; Display mode for boot menu
|
|---|
| 19 | .wBootTimeout resb 2 ; Boot Menu selection timeout in system timer ticks
|
|---|
| 20 | .bIdeCnt resb 1 ; Number of available IDE controllers
|
|---|
| 21 | .bBootDrv resb 1 ; Boot Menu default drive
|
|---|
| 22 | .bMinFddCnt resb 1 ; Minimum number of Floppy Drives
|
|---|
| 23 | .bStealSize resb 1 ; Number of 1kB blocks stolen from 640kB base RAM
|
|---|
| 24 |
|
|---|
| 25 | .ideVars0 resb IDEVARS_size
|
|---|
| 26 | .ideVars1 resb IDEVARS_size
|
|---|
| 27 | .ideVars2 resb IDEVARS_size
|
|---|
| 28 | .ideVars3 resb IDEVARS_size
|
|---|
| 29 |
|
|---|
| 30 | %ifdef MODULE_SERIAL
|
|---|
| 31 | .ideVarsSerialAuto resb IDEVARS_size
|
|---|
| 32 | %endif
|
|---|
| 33 | endstruc
|
|---|
| 34 |
|
|---|
| 35 | ; Bit defines for ROMVARS.wFlags
|
|---|
| 36 | FLG_ROMVARS_FULLMODE EQU (1<<0) ; Full operating mode (steals base RAM, supports EBIOS etc.)
|
|---|
| 37 | FLG_ROMVARS_DRVXLAT EQU (1<<2) ; Enable drive number translation
|
|---|
| 38 | FLG_ROMVARS_SERIAL_SCANDETECT EQU (1<<3) ; Scan COM ports at the end of drive detection. Can also be invoked
|
|---|
| 39 | ; by holding down the ALT key at the end of drive detection.
|
|---|
| 40 | ; (Conveniently, this is 8, a fact we exploit when testing the bit)
|
|---|
| 41 | FLG_ROMVARS_MODULE_SERIAL EQU (1<<6) ; Here in case the configuration needs to know functionality is present
|
|---|
| 42 | FLG_ROMVARS_MODULE_EBIOS EQU (1<<7) ; Here in case the configuration needs to know functionality is present
|
|---|
| 43 |
|
|---|
| 44 | ; Boot Menu Display Modes (see Assembly Library Display.inc for standard modes)
|
|---|
| 45 | DEFAULT_TEXT_MODE EQU 4
|
|---|
| 46 |
|
|---|
| 47 |
|
|---|
| 48 | ; Controller specific variables
|
|---|
| 49 | struc IDEVARS
|
|---|
| 50 | ;;; Word 0
|
|---|
| 51 | .wSerialPortAndBaud: ; Serial connection port (low, divided by 4) and baud rate divisor (high)
|
|---|
| 52 | .wPort: ; IDE Base Port for Command Block (usual) Registers
|
|---|
| 53 | .bSerialPort resb 1
|
|---|
| 54 | .bSerialBaud resb 1
|
|---|
| 55 |
|
|---|
| 56 | ;;; Word 1
|
|---|
| 57 | .wPortCtrl:
|
|---|
| 58 | .bSerialUnused resb 1 ; IDE Base Port for Control Block Registers
|
|---|
| 59 |
|
|---|
| 60 | .wSerialCOMPortCharAndDevice: ; In DetectPrint, we grab the COM Port char and Device at the same time
|
|---|
| 61 | .bSerialCOMPortChar resb 1 ; Serial connection COM port number/letter
|
|---|
| 62 |
|
|---|
| 63 | ;;; Word 2
|
|---|
| 64 | .bDevice resb 1 ; Device type
|
|---|
| 65 |
|
|---|
| 66 | .bIRQ resb 1 ; Interrupt Request Number
|
|---|
| 67 |
|
|---|
| 68 | ;;; And more...
|
|---|
| 69 | .drvParamsMaster resb DRVPARAMS_size
|
|---|
| 70 | .drvParamsSlave resb DRVPARAMS_size
|
|---|
| 71 | endstruc
|
|---|
| 72 |
|
|---|
| 73 | %if IDEVARS.bSerialCOMPortChar+1 != IDEVARS.bDevice
|
|---|
| 74 | %erorr "IDEVARS.bSerialCOMPortChar needs to come immediately before IDEVARS.bDevice so that both bytes can be fetched at the same time inside DetectPrint.asm"
|
|---|
| 75 | %endif
|
|---|
| 76 |
|
|---|
| 77 | ; Default values for Port and PortCtrl, shared with the configurator
|
|---|
| 78 | ;
|
|---|
| 79 | DEVICE_XTIDE_DEFAULT_PORT EQU 300h
|
|---|
| 80 | DEVICE_XTIDE_DEFAULT_PORTCTRL EQU 308h
|
|---|
| 81 | DEVICE_ATA_DEFAULT_PORT EQU 1F0h
|
|---|
| 82 | DEVICE_ATA_DEFAULT_PORTCTRL EQU 3F0h
|
|---|
| 83 |
|
|---|
| 84 | ; Device types for IDEVARS.bDevice
|
|---|
| 85 | ;
|
|---|
| 86 | DEVICE_8BIT_DUAL_PORT_XTIDE EQU (0<<1)
|
|---|
| 87 | DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0 EQU (1<<1)
|
|---|
| 88 | DEVICE_8BIT_SINGLE_PORT EQU (2<<1)
|
|---|
| 89 | DEVICE_16BIT_ATA EQU (3<<1)
|
|---|
| 90 | DEVICE_32BIT_ATA EQU (4<<1)
|
|---|
| 91 | DEVICE_SERIAL_PORT EQU (5<<1) ; must be last entry, or remove optimization in DetectPrint
|
|---|
| 92 | DEVICE_JRIDE_ISA EQU (6<<1)
|
|---|
| 93 |
|
|---|
| 94 |
|
|---|
| 95 | ; Master/Slave drive specific parameters
|
|---|
| 96 | struc DRVPARAMS
|
|---|
| 97 | .wFlags resb 2 ; Drive flags
|
|---|
| 98 | .dwMaximumLBA: ; User specified maximum number of sectors
|
|---|
| 99 | .wCylinders resb 2 ; User specified cylinders (1...16383)
|
|---|
| 100 | .wHeadsAndSectors:
|
|---|
| 101 | .bHeads resb 1 ; User specified Heads (1...16)
|
|---|
| 102 | .bSect resb 1 ; User specified Sectors per track (1...63)
|
|---|
| 103 | endstruc
|
|---|
| 104 |
|
|---|
| 105 | ; Bit defines for DRVPARAMS.wFlags
|
|---|
| 106 | FLG_DRVPARAMS_USERCHS EQU (1<<0) ; User specified P-CHS values
|
|---|
| 107 | FLG_DRVPARAMS_BLOCKMODE EQU (1<<1) ; Enable Block mode transfers
|
|---|
| 108 | FLG_DRVPARAMS_USERLBA EQU (1<<2) ; User specified LBA values
|
|---|
| 109 |
|
|---|
| 110 | ;
|
|---|
| 111 | ; COM Number to I/O Port Address Mapping
|
|---|
| 112 | ;
|
|---|
| 113 | ; COM Number: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
|
|---|
| 114 | ; Corresponds to I/O port: 3f8, 2f8, 3e8, 2e8, 2f0, 3e0, 2e0, 260, 368, 268, 360, 270
|
|---|
| 115 | ; Corresponds to Packed I/O port (hex): 37, 17, 35, 15, 16, 34, 14, 4, 25, 5, 24, 6
|
|---|
| 116 | ;
|
|---|
| 117 | DEVICE_SERIAL_COM1 EQU 3f8h
|
|---|
| 118 | DEVICE_SERIAL_COM2 EQU 2f8h
|
|---|
| 119 | DEVICE_SERIAL_COM3 EQU 3e8h
|
|---|
| 120 | DEVICE_SERIAL_COM4 EQU 2e8h
|
|---|
| 121 | DEVICE_SERIAL_COM5 EQU 2f0h
|
|---|
| 122 | DEVICE_SERIAL_COM6 EQU 3e0h
|
|---|
| 123 | DEVICE_SERIAL_COM7 EQU 2e0h
|
|---|
| 124 | DEVICE_SERIAL_COM8 EQU 260h
|
|---|
| 125 | DEVICE_SERIAL_COM9 EQU 368h
|
|---|
| 126 | DEVICE_SERIAL_COMA EQU 268h
|
|---|
| 127 | DEVICE_SERIAL_COMB EQU 360h
|
|---|
| 128 | DEVICE_SERIAL_COMC EQU 270h
|
|---|
| 129 |
|
|---|
| 130 |
|
|---|
| 131 | %endif ; ROMVARS_INC
|
|---|
