[90] | 1 | ; Project name : XTIDE Universal BIOS |
---|
[3] | 2 | ; Description : Defines for ROMVARS struct containing variables stored |
---|
| 3 | ; in BIOS ROM. |
---|
| 4 | %ifndef ROMVARS_INC |
---|
| 5 | %define ROMVARS_INC |
---|
| 6 | |
---|
[181] | 7 | ; ROM Variables. Written to the ROM image before flashing. |
---|
[3] | 8 | struc ROMVARS |
---|
[181] | 9 | .wRomSign resb 2 ; ROM Signature (AA55h) |
---|
| 10 | .bRomSize resb 1 ; ROM size in 512 byte blocks |
---|
| 11 | .rgbJump resb 3 ; First instruction to ROM init (jmp) |
---|
[90] | 12 | |
---|
[181] | 13 | .rgbSign resb 8 ; Signature for XTIDE Configurator Program |
---|
| 14 | .szTitle resb 31 ; BIOS title string |
---|
| 15 | .szVersion resb 25 ; BIOS version string |
---|
[90] | 16 | |
---|
[181] | 17 | .wFlags resb 2 ; Word for ROM flags |
---|
| 18 | .wDisplayMode resb 2 ; Display mode for boot menu |
---|
[243] | 19 | .wfDisplayBootMenu: ; Zero = no Boot Menu, non-zero = Boot Menu timeout |
---|
[181] | 20 | .wBootTimeout resb 2 ; Boot Menu selection timeout in system timer ticks |
---|
| 21 | .bIdeCnt resb 1 ; Number of available IDE controllers |
---|
| 22 | .bBootDrv resb 1 ; Boot Menu default drive |
---|
| 23 | .bMinFddCnt resb 1 ; Minimum number of Floppy Drives |
---|
| 24 | .bStealSize resb 1 ; Number of 1kB blocks stolen from 640kB base RAM |
---|
[90] | 25 | |
---|
[181] | 26 | .ideVars0 resb IDEVARS_size |
---|
| 27 | .ideVars1 resb IDEVARS_size |
---|
| 28 | .ideVars2 resb IDEVARS_size |
---|
| 29 | .ideVars3 resb IDEVARS_size |
---|
[175] | 30 | |
---|
[176] | 31 | %ifdef MODULE_SERIAL |
---|
[175] | 32 | .ideVarsSerialAuto resb IDEVARS_size |
---|
[176] | 33 | %endif |
---|
[3] | 34 | endstruc |
---|
| 35 | |
---|
| 36 | ; Bit defines for ROMVARS.wFlags |
---|
[199] | 37 | FLG_ROMVARS_FULLMODE EQU (1<<0) ; Full operating mode (steals base RAM, supports EBIOS etc.) |
---|
| 38 | FLG_ROMVARS_DRVXLAT EQU (1<<2) ; Enable drive number translation |
---|
| 39 | FLG_ROMVARS_SERIAL_SCANDETECT EQU (1<<3) ; Scan COM ports at the end of drive detection. Can also be invoked |
---|
| 40 | ; by holding down the ALT key at the end of drive detection. |
---|
| 41 | ; (Conveniently, this is 8, a fact we exploit when testing the bit) |
---|
[243] | 42 | FLG_ROMVARS_MODULE_JRIDE EQU (1<<5) ; Here in case the configuration needs to know functionality is present |
---|
[199] | 43 | FLG_ROMVARS_MODULE_SERIAL EQU (1<<6) ; Here in case the configuration needs to know functionality is present |
---|
| 44 | FLG_ROMVARS_MODULE_EBIOS EQU (1<<7) ; Here in case the configuration needs to know functionality is present |
---|
[176] | 45 | |
---|
[143] | 46 | ; Boot Menu Display Modes (see Assembly Library Display.inc for standard modes) |
---|
| 47 | DEFAULT_TEXT_MODE EQU 4 |
---|
[3] | 48 | |
---|
[143] | 49 | |
---|
[3] | 50 | ; Controller specific variables |
---|
| 51 | struc IDEVARS |
---|
[233] | 52 | ;;; Word 0 |
---|
| 53 | .wSerialPortAndBaud: ; Serial connection port (low, divided by 4) and baud rate divisor (high) |
---|
[196] | 54 | .wPort: ; IDE Base Port for Command Block (usual) Registers |
---|
[233] | 55 | .bSerialPort resb 1 |
---|
| 56 | .bSerialBaud resb 1 |
---|
[196] | 57 | |
---|
[233] | 58 | ;;; Word 1 |
---|
| 59 | .wPortCtrl: |
---|
| 60 | .bSerialUnused resb 1 ; IDE Base Port for Control Block Registers |
---|
[196] | 61 | |
---|
[233] | 62 | .wSerialCOMPortCharAndDevice: ; In DetectPrint, we grab the COM Port char and Device at the same time |
---|
| 63 | .bSerialCOMPortChar resb 1 ; Serial connection COM port number/letter |
---|
| 64 | |
---|
| 65 | ;;; Word 2 |
---|
[196] | 66 | .bDevice resb 1 ; Device type |
---|
[233] | 67 | |
---|
[196] | 68 | .bIRQ resb 1 ; Interrupt Request Number |
---|
[233] | 69 | |
---|
| 70 | ;;; And more... |
---|
[196] | 71 | .drvParamsMaster resb DRVPARAMS_size |
---|
| 72 | .drvParamsSlave resb DRVPARAMS_size |
---|
[3] | 73 | endstruc |
---|
| 74 | |
---|
[261] | 75 | %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS |
---|
| 76 | %if IDEVARS.bSerialCOMPortChar+1 != IDEVARS.bDevice |
---|
| 77 | %error "IDEVARS.bSerialCOMPortChar needs to come immediately before IDEVARS.bDevice so that both bytes can be fetched at the same time inside DetectPrint.asm" |
---|
| 78 | %endif |
---|
[233] | 79 | %endif |
---|
| 80 | |
---|
[199] | 81 | ; Default values for Port and PortCtrl, shared with the configurator |
---|
| 82 | ; |
---|
| 83 | DEVICE_XTIDE_DEFAULT_PORT EQU 300h |
---|
| 84 | DEVICE_XTIDE_DEFAULT_PORTCTRL EQU 308h |
---|
| 85 | DEVICE_ATA_DEFAULT_PORT EQU 1F0h |
---|
| 86 | DEVICE_ATA_DEFAULT_PORTCTRL EQU 3F0h |
---|
| 87 | |
---|
[175] | 88 | ; Device types for IDEVARS.bDevice |
---|
[199] | 89 | ; |
---|
[150] | 90 | DEVICE_8BIT_DUAL_PORT_XTIDE EQU (0<<1) |
---|
| 91 | DEVICE_XTIDE_WITH_REVERSED_A3_AND_A0 EQU (1<<1) |
---|
| 92 | DEVICE_8BIT_SINGLE_PORT EQU (2<<1) |
---|
| 93 | DEVICE_16BIT_ATA EQU (3<<1) |
---|
| 94 | DEVICE_32BIT_ATA EQU (4<<1) |
---|
[244] | 95 | DEVICE_SERIAL_PORT EQU (5<<1) |
---|
[238] | 96 | DEVICE_JRIDE_ISA EQU (6<<1) |
---|
[3] | 97 | |
---|
[199] | 98 | |
---|
[3] | 99 | ; Master/Slave drive specific parameters |
---|
| 100 | struc DRVPARAMS |
---|
| 101 | .wFlags resb 2 ; Drive flags |
---|
[227] | 102 | .dwMaximumLBA: ; User specified maximum number of sectors |
---|
[3] | 103 | .wCylinders resb 2 ; User specified cylinders (1...16383) |
---|
[99] | 104 | .wHeadsAndSectors: |
---|
| 105 | .bHeads resb 1 ; User specified Heads (1...16) |
---|
[3] | 106 | .bSect resb 1 ; User specified Sectors per track (1...63) |
---|
| 107 | endstruc |
---|
| 108 | |
---|
| 109 | ; Bit defines for DRVPARAMS.wFlags |
---|
| 110 | FLG_DRVPARAMS_USERCHS EQU (1<<0) ; User specified P-CHS values |
---|
| 111 | FLG_DRVPARAMS_BLOCKMODE EQU (1<<1) ; Enable Block mode transfers |
---|
[227] | 112 | FLG_DRVPARAMS_USERLBA EQU (1<<2) ; User specified LBA values |
---|
[3] | 113 | |
---|
[199] | 114 | ; |
---|
| 115 | ; COM Number to I/O Port Address Mapping |
---|
| 116 | ; |
---|
[242] | 117 | ; COM Number: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 |
---|
[199] | 118 | ; Corresponds to I/O port: 3f8, 2f8, 3e8, 2e8, 2f0, 3e0, 2e0, 260, 368, 268, 360, 270 |
---|
| 119 | ; Corresponds to Packed I/O port (hex): 37, 17, 35, 15, 16, 34, 14, 4, 25, 5, 24, 6 |
---|
| 120 | ; |
---|
| 121 | DEVICE_SERIAL_COM1 EQU 3f8h |
---|
| 122 | DEVICE_SERIAL_COM2 EQU 2f8h |
---|
| 123 | DEVICE_SERIAL_COM3 EQU 3e8h |
---|
| 124 | DEVICE_SERIAL_COM4 EQU 2e8h |
---|
| 125 | DEVICE_SERIAL_COM5 EQU 2f0h |
---|
| 126 | DEVICE_SERIAL_COM6 EQU 3e0h |
---|
| 127 | DEVICE_SERIAL_COM7 EQU 2e0h |
---|
| 128 | DEVICE_SERIAL_COM8 EQU 260h |
---|
| 129 | DEVICE_SERIAL_COM9 EQU 368h |
---|
| 130 | DEVICE_SERIAL_COMA EQU 268h |
---|
| 131 | DEVICE_SERIAL_COMB EQU 360h |
---|
| 132 | DEVICE_SERIAL_COMC EQU 270h |
---|
| 133 | |
---|
| 134 | |
---|
[3] | 135 | %endif ; ROMVARS_INC |
---|