source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Inc/RamVars.inc@ 553

Last change on this file since 553 was 526, checked in by krille_n_@…, 12 years ago

Changes:

  • Update of the copyright notices to include the year 2013.
File size: 4.5 KB
RevLine 
[88]1; Project name : XTIDE Universal BIOS
[3]2; Description : RAMVARS struct containing BIOS variables stored in RAM.
[376]3
4;
[505]5; XTIDE Universal BIOS and Associated Tools
[526]6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
[376]7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
[505]12;
[376]13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
[505]16; GNU General Public License for more details.
[376]17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
[3]20%ifndef RAMVARS_INC
21%define RAMVARS_INC
22
23; Segment when RAMVARS is stored to top of interrupt vectors.
[400]24%ifndef USE_AT
[505]25 LITE_MODE_RAMVARS_SEGMENT EQU 30h
[400]26%endif
[3]27
[492]28
[505]29%ifdef MODULE_SERIAL_FLOPPY OR MODULE_DRIVEXLATE
[492]30 %define NEED_XLATEVARS
31%endif
32
33
[3]34; RAM Variables.
35; Variables should be kept to minimum since they might be located
36; at the top of interrupt vectors.
37struc RAMVARS
[417]38%ifdef RELOCATE_INT13H_STACK
[525]39 resb 252
40 .dwStackChangeDSDI:
41 .wStackChangeDI resb 2 ; Used during stack
42 .wStackChangeDS resb 2 ; switching only
43 .rgbTopOfStack: ; 256 bytes of stack
[417]44 .fpInt13hEntryStack resb 4
45%endif
[444]46 .wDrvDetectSignature: ; Signature when BIOS is in drive detection mode
[148]47 .fpOldI13h resb 4 ; Far pointer to old INT 13h handler
[444]48 .wSignature resb 2 ; Sign for finding stolen 1...64 kiB
[155]49 .bTimeoutTicksLeft resb 1
50 .bLastTimeoutUpdate resb 1
[3]51
[433]52 .wFirstDrvAndCount:
[258]53 .bFirstDrv resb 1 ; Number of first drive for this BIOS
[262]54 .wDrvCntAndFlopCnt: ; Both the hard disk and floppy counts in one word
55 ; (yes, misaligned, but it is only used this way during initialization)
[148]56 .bDrvCnt resb 1 ; Number of drives handled by this BIOS
[3]57
58 ; Variables for drive number translation
[492]59%ifdef NEED_XLATEVARS
[414]60 .xlateVars resb XLATEVARS_size
61%endif
[3]62endstruc
63
[444]64; Note!!! .wDrvDetectSignature and .wSignature are intentionally in different locations.
65RAMVARS_RAM_SIGNATURE EQU "Xu" ; RAMVARS signature for .wSignature
66RAMVARS_DRV_DETECT_SIGNATURE EQU 5A5Ah ; Signature when BIOS is in drive detection mode
[414]67
[444]68
[492]69%ifdef NEED_XLATEVARS
[414]70; Variables for translating drive numbers.
71 struc XLATEVARS
72 %ifdef MODULE_SERIAL_FLOPPY
73 .bFlopCreateCnt:
74 .bFlopCntAndFirst resb 1 ; Normally, packed starting floppy drive number (high order 7 bits)
75 ; and number of drives (low order bit, max 2 drives supported).
76 ; During initialization, until the end of DetectDrives_FromAllIDEControllers,
[505]77 ; this byte contains the raw number of floppy drives seen
[492]78 ; (using .bFlopCreateCnt)
[414]79 %else
80 resb 1 ; alignment
81 %endif
[492]82
83 %ifdef MODULE_DRIVEXLATE
[414]84 .bXlatedDrv resb 1 ; Drive number after translation
85 .wFDandHDswap:
86 .bFDSwap resb 1 ; Floppy Drive to swap to 00h and vice versa
87 .bHDSwap resb 1 ; Hard Drive to swap to 80h and vice versa
[492]88 %else
89 resb 1 ; alignment
90 %endif
[414]91 endstruc
92%endif
93
[262]94%ifdef MODULE_SERIAL_FLOPPY
95 %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
96 %if RAMVARS.xlateVars != RAMVARS.bDrvCnt+1 || XLATEVARS.bFlopCreateCnt != 0
97 %error "bFlopCreateCnt needs to be the first thing in XLATEVARS, and .xlateVars needs to come immediately after .bDrvCnt. In at least one place, we read .wDrvCntAndFlopCnt to get both counts in one fetch"
98 %endif
99 %endif
100%endif
101
[150]102
[444]103
[179]104;
[505]105; IDEPACK NOTE: The first six bytes of this structure are directly put on the
[179]106; wire for MODULE_SERIAL, please do not change the order or insert other members.
107;
[414]108struc IDEPACK ; PIOVARS and MEMPIOVARS overwrite the first 7 bytes
[179]109 .bFeatures resb 1
[150]110 .bDrvAndHead resb 1 ; LBA28 27...24
111
112 .wSectorCountAndLbaLow:
113 .bSectorCount resb 1
114 .bSectorNumber:
115 .bLbaLow resb 1 ; LBA 7...0
116
117 .wCylinder:
118 .wLbaMiddleAndHigh:
119 .bLbaMiddle resb 1 ; LBA 15...8
120 .bLbaHigh resb 1 ; LBA 23...16
121
122 .bCommand resb 1
[414]123 .bDeviceControl resb 1 ; Offset 7 shared with PIOVARS and MEMPIOVARS
124 resb 1 ; Used by PIOVARS and MEMPIOVARS
[150]125
[413]126%ifdef MODULE_EBIOS
[150]127 ; Parameters for 48-bit LBA
128 .bLbaLowExt resb 1 ; LBA48 31...24
129 .wLbaMiddleAndHighExt:
130 .bLbaMiddleExt resb 1 ; LBA48 39...32
131 .bLbaHighExt resb 1 ; LBA48 47...40
[413]132%endif
[414]133
[150]134 .intpack resb INTPACK_size
[3]135endstruc
136
[443]137SIZE_OF_IDEPACK_WITHOUT_INTPACK EQU (IDEPACK_size - INTPACK_size)
[3]138
139
140%endif ; RAMVARS_INC
Note: See TracBrowser for help on using the repository browser.