source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Inc/RamVars.inc @ 376

Last change on this file since 376 was 376, checked in by gregli@…, 12 years ago

WIDE checkin... Added copyright and license information to sorce files, as per the GPL instructions for usage.

File size: 3.6 KB
RevLine 
[88]1; Project name  :   XTIDE Universal BIOS
[3]2; Description   :   RAMVARS struct containing BIOS variables stored in RAM.
[376]3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.     
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
[3]20%ifndef RAMVARS_INC
21%define RAMVARS_INC
22
23; Segment when RAMVARS is stored to top of interrupt vectors.
[150]24LITE_MODE_RAMVARS_SEGMENT   EQU     30h
[3]25
26
27; Variables for translating drive numbers.
28struc XLATEVARS
[258]29%ifdef MODULE_SERIAL_FLOPPY
30    .bFlopCreateCnt:
31    .bFlopCntAndFirst   resb    1   ; Normally, packed starting floppy drive number (high order 7 bits)
32                                    ; and number of drives (low order bit, max 2 drives supported).
33                                    ; During initialization, until the end of DetectDrives_FromAllIDEControllers,
34                                    ; this byte contains the raw number of floppy drives seen (using .bFlopCreateCnt)
35%else
36                        resb    1   ; alignment
37%endif
[262]38    .bXlatedDrv         resb    1   ; Drive number after translation
39    .wFDandHDswap:
40    .bFDSwap            resb    1   ; Floppy Drive to swap to 00h and vice versa
41    .bHDSwap            resb    1   ; Hard Drive to swap to 80h and vice versa
[3]42endstruc
43
44; RAM Variables.
45; Variables should be kept to minimum since they might be located
46; at the top of interrupt vectors.
47struc RAMVARS
[148]48    .fpOldI13h          resb    4   ; Far pointer to old INT 13h handler
[150]49    .wSignature         resb    2   ; Sign for finding stolen 1 kiB
[155]50    .bTimeoutTicksLeft  resb    1
51    .bLastTimeoutUpdate resb    1
[3]52
53    .wDrvCntAndFirst:
[258]54    .bFirstDrv          resb    1   ; Number of first drive for this BIOS
[262]55    .wDrvCntAndFlopCnt:             ; Both the hard disk and floppy counts in one word
56                                    ; (yes, misaligned, but it is only used this way during initialization)
[148]57    .bDrvCnt            resb    1   ; Number of drives handled by this BIOS
[3]58
59    ; Variables for drive number translation
60    .xlateVars      resb    XLATEVARS_size
61endstruc
62
[262]63%ifdef MODULE_SERIAL_FLOPPY
64  %ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
65    %if RAMVARS.xlateVars != RAMVARS.bDrvCnt+1 || XLATEVARS.bFlopCreateCnt != 0
66        %error "bFlopCreateCnt needs to be the first thing in XLATEVARS, and .xlateVars needs to come immediately after .bDrvCnt.  In at least one place, we read .wDrvCntAndFlopCnt to get both counts in one fetch"
67    %endif
68  %endif
69%endif
70
[150]71RAMVARS_SIGNATURE       EQU "Xu"    ; RAMVARS signature for .wSignature
72
[179]73;
74; IDEPACK NOTE: The first six bytes of this structure are directly put on the
75; wire for MODULE_SERIAL, please do not change the order or insert other members.
76;
[150]77struc IDEPACK
[179]78    .bFeatures              resb    1
[150]79    .bDrvAndHead            resb    1   ; LBA28 27...24
80
81    .wSectorCountAndLbaLow:
82    .bSectorCount           resb    1
83    .bSectorNumber:
84    .bLbaLow                resb    1   ; LBA 7...0
85
86    .wCylinder:
87    .wLbaMiddleAndHigh:
88    .bLbaMiddle             resb    1   ; LBA 15...8
89    .bLbaHigh               resb    1   ; LBA 23...16
90
91    .bCommand               resb    1
92    .bDeviceControl         resb    1   ; Offset 7 shared with PIOVARS
[218]93                            resb    1
[150]94
95    ; Parameters for 48-bit LBA
96    .bLbaLowExt             resb    1   ; LBA48 31...24
97    .wLbaMiddleAndHighExt:
98    .bLbaMiddleExt          resb    1   ; LBA48 39...32
99    .bLbaHighExt            resb    1   ; LBA48 47...40
100
101    .intpack                resb    INTPACK_size
[3]102endstruc
103
[155]104EXTRA_BYTES_FOR_INTPACK     EQU (IDEPACK_size - INTPACK_size)
[3]105
106
107%endif ; RAMVARS_INC
Note: See TracBrowser for help on using the repository browser.