source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Inc/ModuleDependency.inc@ 596

Last change on this file since 596 was 589, checked in by Krister Nordvall, 9 years ago

Changes:

  • BIOS: Fixed a purely cosmetic bug from r542 where, in builds containing MODULE_EBIOS, the boot menu would display an incorrect drive size (0.4 kB with MODULE_STRINGS_COMPRESSED or 0.5 kB without) for old drives with no support for LBA.
  • Fixed a bug from r392 where Vision_DetectAndReturnIDinAXandPortInDXifControllerPresent would return the ID in AL instead of AH (if DANGEROUS_DETECTION had been defined).
  • Fixed a bug from r587 in AdvAtaInit.asm that would prevent detection of QDI Vision controllers.
  • Also changed how the QDI Vision IDs are defined (removed the need for shifting) to avoid confusion. This fixed a potential bug from r587 in AdvAtaInit.asm where some IDs were not being shifted.
  • Fixed a bug in PDC20x30.asm from r587 where GetPdcIDtoAX would not return with the IDE base port in DX so DisablePdcProgrammingMode would fail.
  • Made some changes to ModuleDependency.inc and other files so that MODULE_ADVANCED_ATA now requires USE_386. Consequently it is no longer included in the regular AT-builds, only in the 386_8k-build.
  • Moved the UNROLL_SECTORS_IN_CX_TO_xWORDS macros from IDE_8bit.inc to IdeIO.inc which means it's now possible to build a BIOS without MODULE_8BIT_IDE.
  • XTIDECFG: Added a minimum DOS version check (since it needs DOS version 2+) to allow the program to quit gracefully in the unlikely scenario where someone tries to run it under DOS version 1.
  • Made some changes to Drive.asm to improve drive enumeration. The old method using GET_DOS_DRIVE_PARAMETER_BLOCK_FOR_SPECIFIC_DRIVE worked well in Windows XP but not in Windows 98 SE (in Windows or in DOS mode). The two problems were; 1) The function call would access the drives which on single floppy drive systems would cause Windows to swap between A: and B: (throwing a blue screen asking the user to insert a disk etc). 2) Only floppy drives and FAT16 drives would be available in the list of drives, no FAT32/optical/network drives.
  • Improved code in IdeControllerMenu.asm so that the default port addresses for all IDE interfaces are now restored when (re-)selecting the (same) type of IDE device.
  • Also made it impossible to select a device type unless the required module is included in the loaded BIOS.
  • The version check done when loading a BIOS now uses the FLASH_SIGNATURE definition from Version.inc. Any changes affecting RomVars now only requires updating that definition. This means that changes to RomVars must be implemented in both the BIOS and XTIDECFG before being committed to the repository.
  • Added a compatibility fix for 3Com 3C503 cards to the ROM checksumming code in Buffers.asm (Buffers_GenerateChecksum).
  • SerDrive: Made some minor changes to file names and paths to improve compatibility with case sensitive environments.
  • BIOSDRVS: Made a minor size optimization which as a side effect also makes it compatible with all DOS versions including DOS version 1.
  • Library: Renamed the WAIT_RETRACE_IF_NECESSARY_THEN macro to CALL_WAIT_FOR_RETRACE_IF_NECESSARY_THEN and made a tail-call-optimized version of it (JMP_WAIT_FOR_RETRACE_IF_NECESSARY_THEN).
  • A speed optimization to the eRCL_IM macro for 386 and higher. This change breaks emulation in the sense that the macro will fail when given a memory operand as the first parameter.
  • Other minor optimizations and fixes.
File size: 4.1 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Dependencies for optional modules.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Allow RELOCATE_INT13H_STACK only for AT builds
21%ifndef USE_AT
22 %ifdef RELOCATE_INT13H_STACK
23 %undef RELOCATE_INT13H_STACK
24 %warning "RELOCATE_INT13H_STACK is not supported for XT builds!"
25 %endif
26%endif
27
28%ifdef MODULE_SERIAL_FLOPPY
29 %ifndef MODULE_SERIAL
30 %define MODULE_SERIAL
31 %endif
32%endif
33
34%ifdef MODULE_8BIT_IDE_ADVANCED
35 %define MODULE_8BIT_IDE
36 %include "DmaController.inc"
37 %include "XTCF.inc" ; For Lo-tech XT-CF
38 %include "JRIDE_ISA.inc" ; For JR-IDE/ISA
39 %include "ADP50L.inc" ; For SVC ADP50L
40%endif
41
42%ifdef MODULE_8BIT_IDE
43 %include "IDE_8bit.inc" ; For IDE 8-bit data port macros
44%endif
45
46%ifdef MODULE_ADVANCED_ATA
47 %ifndef USE_386
48 %error "MODULE_ADVANCED_ATA requires USE_386!"
49 %endif
50 %include "AdvancedID.inc"
51 %include "PDC20x30.inc" ; For Promise PDC 20230-C and 20630 controllers
52 %include "Vision.inc" ; For QDI Vision QD65xx VLB IDE Controllers
53%endif
54
55%ifdef MODULE_COMPATIBLE_TABLES
56 %include "CompatibleDPT.inc"
57%endif
58
59%ifdef MODULE_EBIOS
60 %include "EBIOS.inc" ; Equates for EBIOS functions
61%endif
62
63%ifdef MODULE_HOTKEYS
64 %include "HotkeyBar.inc" ; For Hotkeys
65%endif
66
67%ifdef MODULE_BOOT_MENU
68 %include "BootMenu.inc" ; For Boot Menu
69%endif
70
71%ifdef MODULE_BOOT_MENU OR MODULE_HOTKEYS
72 %define MODULE_DRIVEXLATE
73%endif
74
75%ifdef MODULE_IRQ
76 %include "IntController.inc"
77%endif
78
79
80; Included modules for ROMVARS.wFlags
81%ifdef MODULE_8BIT_IDE
82 MAIN_FLG_MODULE_8BIT_IDE EQU FLG_ROMVARS_MODULE_8BIT_IDE
83%else
84 MAIN_FLG_MODULE_8BIT_IDE EQU 0
85%endif
86
87%ifdef MODULE_ADVANCED_ATA
88 MAIN_FLG_MODULE_ADVANCED_ATA EQU FLG_ROMVARS_MODULE_ADVANCED_ATA
89%else
90 MAIN_FLG_MODULE_ADVANCED_ATA EQU 0
91%endif
92
93%ifdef MODULE_BOOT_MENU
94 MAIN_FLG_MODULE_BOOT_MENU EQU FLG_ROMVARS_MODULE_BOOT_MENU
95%else
96 MAIN_FLG_MODULE_BOOT_MENU EQU 0
97%endif
98
99%ifdef MODULE_EBIOS
100 MAIN_FLG_MODULE_EBIOS EQU FLG_ROMVARS_MODULE_EBIOS
101%else
102 MAIN_FLG_MODULE_EBIOS EQU 0
103%endif
104
105%ifdef MODULE_HOTKEYS
106 MAIN_FLG_MODULE_HOTKEYS EQU FLG_ROMVARS_MODULE_HOTKEYS
107%else
108 MAIN_FLG_MODULE_HOTKEYS EQU 0
109%endif
110
111%ifdef MODULE_IRQ
112 MAIN_FLG_MODULE_IRQ EQU FLG_ROMVARS_MODULE_IRQ
113%else
114 MAIN_FLG_MODULE_IRQ EQU 0
115%endif
116
117%ifdef MODULE_SERIAL
118 MAIN_FLG_MODULE_SERIAL EQU FLG_ROMVARS_MODULE_SERIAL
119%else
120 MAIN_FLG_MODULE_SERIAL EQU 0
121%endif
122
123%ifdef MODULE_SERIAL_FLOPPY
124 MAIN_FLG_MODULE_SERIAL_FLOPPY EQU FLG_ROMVARS_MODULE_SERIAL_FLOPPY
125%else
126 MAIN_FLG_MODULE_SERIAL_FLOPPY EQU 0
127%endif
128
129%ifdef MODULE_STRINGS_COMPRESSED
130 MAIN_FLG_MODULE_STRINGS_COMPRESSED EQU FLG_ROMVARS_MODULE_STRINGS_COMPRESSED
131%else
132 MAIN_FLG_MODULE_STRINGS_COMPRESSED EQU 0
133%endif
134
135%ifdef MODULE_POWER_MANAGEMENT
136 MAIN_FLG_MODULE_POWER_MANAGEMENT EQU FLG_ROMVARS_MODULE_POWER_MANAGEMENT
137%else
138 MAIN_FLG_MODULE_POWER_MANAGEMENT EQU 0
139%endif
140
141%ifdef MODULE_8BIT_IDE_ADVANCED
142 MAIN_FLG_MODULE_8BIT_IDE_ADVANCED EQU FLG_ROMVARS_MODULE_8BIT_IDE_ADVANCED
143%else
144 MAIN_FLG_MODULE_8BIT_IDE_ADVANCED EQU 0
145%endif
146
147MASK_ROMVARS_INCLUDED_MODULES EQU MAIN_FLG_MODULE_8BIT_IDE | MAIN_FLG_MODULE_ADVANCED_ATA | MAIN_FLG_MODULE_BOOT_MENU | MAIN_FLG_MODULE_EBIOS | MAIN_FLG_MODULE_HOTKEYS | MAIN_FLG_MODULE_IRQ | MAIN_FLG_MODULE_SERIAL | MAIN_FLG_MODULE_SERIAL_FLOPPY | MAIN_FLG_MODULE_STRINGS_COMPRESSED | MAIN_FLG_MODULE_POWER_MANAGEMENT | MAIN_FLG_MODULE_8BIT_IDE_ADVANCED
Note: See TracBrowser for help on using the repository browser.