| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Defines for DPT structs containing custom
|
|---|
| 3 | ; Disk Parameter Table used by this BIOS.
|
|---|
| 4 | %ifndef CUSTOMDPT_INC
|
|---|
| 5 | %define CUSTOMDPT_INC
|
|---|
| 6 |
|
|---|
| 7 |
|
|---|
| 8 | ; Base Disk Parameter Table for all hard disk drives.
|
|---|
| 9 | ; DPT might have extensions for specific functions.
|
|---|
| 10 | struc DPT
|
|---|
| 11 | ; General Disk Parameter Table related
|
|---|
| 12 | .bSize resb 1 ; Size of DPT (with extensions) in bytes
|
|---|
| 13 | .wDrvNumAndFlags:
|
|---|
| 14 | .bDrvNum resb 1 ; Drive number
|
|---|
| 15 | .bFlags resb 1 ; DPT and Drive related flags
|
|---|
| 16 | .bReset resb 1 ; Drive reset status (for debugging)
|
|---|
| 17 | .bIdeOff resb 1 ; Offset to IDEVARS for this drive
|
|---|
| 18 |
|
|---|
| 19 | ; Lookup values for L-CHS to P-CHS and L-CHS to LBA28 conversions
|
|---|
| 20 | .bShLtoP resb 1 ; Bit shift count for L-CHS to P-CHS conversion
|
|---|
| 21 | .wLHeads resb 2 ; Number of L-CHS Heads (1...256)
|
|---|
| 22 |
|
|---|
| 23 | ; IDE related
|
|---|
| 24 | .wPCyls resb 2 ; Number of P-CHS (IDE) Cylinders (1...16383)
|
|---|
| 25 | .wHeadsAndSectors:
|
|---|
| 26 | .bPHeads resb 1 ; Number of P-CHS (IDE) Heads (1...16)
|
|---|
| 27 | .bPSect resb 1 ; Number of P-CHS (IDE) Sectors per Track (1...63)
|
|---|
| 28 | .bDrvSel resb 1 ; Drive Selection byte for Device/Head Register
|
|---|
| 29 | .bDrvCtrl resb 1 ; Drive Control byte for Device Control Register
|
|---|
| 30 |
|
|---|
| 31 | ; Related to Block Mode transfers.
|
|---|
| 32 | ; Block size is specified in sectors (1, 2, 4, 8, 16, 32, 64 or 128).
|
|---|
| 33 | .wSetAndMaxBlock:
|
|---|
| 34 | .bSetBlock resb 1 ; Currect block size (at least 1)
|
|---|
| 35 | .bMaxBlock resb 1 ; Maximum block size, 0 = block mode not supported
|
|---|
| 36 | endstruc
|
|---|
| 37 |
|
|---|
| 38 | ; Bit definitions for DPT.bFlags
|
|---|
| 39 | MASK_DPT_ADDR EQU 110b ; Bits 1..2, Addressing Mode
|
|---|
| 40 | FLG_DPT_EBIOS EQU (1<<0) ; EBIOS functions supported for this drive
|
|---|
| 41 | FLG_DPT_FIRSTPART EQU (1<<3) ; First BIOS Partition of the drive (drive reset allowed)
|
|---|
| 42 | FLG_DPT_PARTITION EQU (1<<4) ; BIOS Partition
|
|---|
| 43 | FLG_DPT_USERCHS EQU (1<<5) ; User has specified P-CHS parameters
|
|---|
| 44 |
|
|---|
| 45 | ; Values for different addressing modes (MASK_DPT_ADDR for DPT.bFlags)
|
|---|
| 46 | ADDR_DPT_LCHS EQU 0 ; L-CHS Addressing Mode (NORMAL in many other BIOSes)
|
|---|
| 47 | ADDR_DPT_PCHS EQU 1 ; P-CHS Addressing Mode (LARGE in many other BIOSes)
|
|---|
| 48 | ADDR_DPT_LBA28 EQU 2 ; 28-bit LBA Addressing Mode
|
|---|
| 49 | ADDR_DPT_LBA48 EQU 3 ; 48-bit LBA Addressing Mode
|
|---|
| 50 |
|
|---|
| 51 | ; Bit definitions for DPT.bReset (inverted)
|
|---|
| 52 | FLG_RESET_nDRDY EQU (1<<0) ; Drive ready to accept commands
|
|---|
| 53 | FLG_RESET_nINITPRMS EQU (1<<1) ; Initialize Device Parameters successfull
|
|---|
| 54 | FLG_RESET_nRECALIBRATE EQU (1<<2) ; Recalibrate successfull
|
|---|
| 55 | FLG_RESET_nSETBLOCK EQU (1<<3) ; Initialize Block Mode successfull
|
|---|
| 56 | MASK_RESET_ALL EQU (FLG_RESET_nDRDY | FLG_RESET_nINITPRMS | FLG_RESET_nRECALIBRATE | FLG_RESET_nSETBLOCK)
|
|---|
| 57 |
|
|---|
| 58 |
|
|---|
| 59 | ; Extended DPT for XTIDE Universal BIOS partitioned drive.
|
|---|
| 60 | ; This struct cannot exist with EDPT (EBIOS support).
|
|---|
| 61 | struc PART_DPT
|
|---|
| 62 | .dpt resb DPT_size
|
|---|
| 63 | .dwStartLBA:
|
|---|
| 64 | .twStartLBA resb 6 ; Starting 28- or 48-bit LBA for BIOS partition
|
|---|
| 65 | endstruc
|
|---|
| 66 |
|
|---|
| 67 |
|
|---|
| 68 | ; Extended DPT for EBIOS support.
|
|---|
| 69 | ; This struct cannot exist with PDPT (XTIDE Universal BIOS partitioned drive).
|
|---|
| 70 | struc EBDPT
|
|---|
| 71 | .dpt resb DPT_size
|
|---|
| 72 | .dwCapacity:
|
|---|
| 73 | .twCapacity resb 6 ; Total drive capacity in sectors
|
|---|
| 74 | endstruc
|
|---|
| 75 |
|
|---|
| 76 |
|
|---|
| 77 | %endif ; CUSTOMDPT_INC
|
|---|
