| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Lo-tech XT-CFv2 board specifications.
|
|---|
| 3 | ;
|
|---|
| 4 | ; More information at http://www.lo-tech.co.uk/XT-CF
|
|---|
| 5 |
|
|---|
| 6 | ;
|
|---|
| 7 | ; XTIDE Universal BIOS and Associated Tools
|
|---|
| 8 | ; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
|
|---|
| 9 | ;
|
|---|
| 10 | ; This program is free software; you can redistribute it and/or modify
|
|---|
| 11 | ; it under the terms of the GNU General Public License as published by
|
|---|
| 12 | ; the Free Software Foundation; either version 2 of the License, or
|
|---|
| 13 | ; (at your option) any later version.
|
|---|
| 14 | ;
|
|---|
| 15 | ; This program is distributed in the hope that it will be useful,
|
|---|
| 16 | ; but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|---|
| 17 | ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|---|
| 18 | ; GNU General Public License for more details.
|
|---|
| 19 | ; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
|
|---|
| 20 | ;
|
|---|
| 21 |
|
|---|
| 22 | ; Modified by JJP for XT-CFv3 support, Mar-13
|
|---|
| 23 |
|
|---|
| 24 |
|
|---|
| 25 | %ifndef XTCF_INC
|
|---|
| 26 | %define XTCF_INC
|
|---|
| 27 |
|
|---|
| 28 | ; XT-CF requires that block must be less than 128 sectors (64 kiB) for DMA
|
|---|
| 29 | ; transfers.
|
|---|
| 30 | ;
|
|---|
| 31 | ; Note: XT-CFv3 DMA will not interfere with PC & PC/XT memory refresh,
|
|---|
| 32 | ; since the XT-CFv3 detaches itself from the bus every 16 bytes transferred.
|
|---|
| 33 | ;
|
|---|
| 34 | XTCF_DMA_MODE_MAX_BLOCK_SIZE EQU 64 ; Sectors
|
|---|
| 35 |
|
|---|
| 36 | ; Possible base addresses. Note that all XT-CF IDE registers are SHL 1 compared
|
|---|
| 37 | ; to standard IDE registers.
|
|---|
| 38 | XTCF_BASE_PORT_1 EQU 200h
|
|---|
| 39 | XTCF_BASE_PORT_2 EQU 240h
|
|---|
| 40 | XTCF_BASE_PORT_3 EQU 300h ; Default setting
|
|---|
| 41 | XTCF_BASE_PORT_4 EQU 340h
|
|---|
| 42 |
|
|---|
| 43 |
|
|---|
| 44 | ; XT-CF Control Register (do not SHL 1 these!)
|
|---|
| 45 | ; Note: XT-CFv3 control register is used *only* to raise DRQ. The register cannot be read.
|
|---|
| 46 | ;
|
|---|
| 47 | XTCF_CONTROL_REGISTER EQU 1Eh
|
|---|
| 48 |
|
|---|
| 49 | ; Transfer Mode Constants
|
|---|
| 50 | ;
|
|---|
| 51 | ; Available transfer modes depend on the controller. All XT-CF controllers
|
|---|
| 52 | ; support 8-bit PIO, either with 8-bit or 16-bit instructions (i.e., data
|
|---|
| 53 | ; can be fetched from the controller with REP INSW or REP INSB since A0 is
|
|---|
| 54 | ; not decoded). However, errors in the implementation of the BIU on some
|
|---|
| 55 | ; machines will prevent 16-bit instructions delivering data correctly.
|
|---|
| 56 | ;
|
|---|
| 57 | ; For XT-CFv3 adapter, DMA transfers are also supported via channel 3.
|
|---|
| 58 | ;
|
|---|
| 59 | ; XT-CFv3 cannot be distinguised by software, so user must decide and set
|
|---|
| 60 | ; the mode via a call to Int 13h function 1Eh accordingly (see AH1E_XTCF.asm).
|
|---|
| 61 | ;;
|
|---|
| 62 | XTCF_8BIT_PIO_MODE EQU 00h
|
|---|
| 63 | XTCF_8BIT_PIO_MODE_WITH_BIU_OFFLOAD EQU 01h
|
|---|
| 64 | XTCF_DMA_MODE EQU 02h
|
|---|
| 65 |
|
|---|
| 66 | ; Subcommands for AH=1Eh, Lo-tech XT-CF features.
|
|---|
| 67 | ; Return values common for all subcommands:
|
|---|
| 68 | ; AH: RET_HD_SUCCESS if drive is XT-CF
|
|---|
| 69 | ; RET_HD_INVALID if drive is not XT-CF
|
|---|
| 70 | ; CF: 0 if successful, 1 if error
|
|---|
| 71 |
|
|---|
| 72 | ;--------------------------------------------------------------------
|
|---|
| 73 | ; IS_THIS_DRIVE_XTCF
|
|---|
| 74 | ; Parameters:
|
|---|
| 75 | ; DL: Drive Number
|
|---|
| 76 | ;--------------------------------------------------------------------
|
|---|
| 77 | IS_THIS_DRIVE_XTCF EQU 0
|
|---|
| 78 |
|
|---|
| 79 | ;--------------------------------------------------------------------
|
|---|
| 80 | ; SET_XTCF_TRANSFER_MODE
|
|---|
| 81 | ; Parameters:
|
|---|
| 82 | ; DH: Mode to select,
|
|---|
| 83 | ; i.e. XTCF_8BIT_PIO_MODE
|
|---|
| 84 | ; Note there's no way to know if an
|
|---|
| 85 | ; XT-CF adapter supports DMA, so the
|
|---|
| 86 | ; user should enable DMA only if a
|
|---|
| 87 | ; DMA-enabled XT-CFv3 is fitted.
|
|---|
| 88 | ; DL: Drive Number
|
|---|
| 89 | ;--------------------------------------------------------------------
|
|---|
| 90 | SET_XTCF_TRANSFER_MODE EQU 1
|
|---|
| 91 |
|
|---|
| 92 | ;--------------------------------------------------------------------
|
|---|
| 93 | ; GET_XTCF_TRANSFER_MODE
|
|---|
| 94 | ; Parameters:
|
|---|
| 95 | ; DL: Drive Number
|
|---|
| 96 | ; Returns:
|
|---|
| 97 | ; DL: Block mode sectors per block
|
|---|
| 98 | ; configured
|
|---|
| 99 | ; DH: One of the mode values listed above,
|
|---|
| 100 | ; i.e. XTCF_8BIT_PIO_MODE
|
|---|
| 101 | ;--------------------------------------------------------------------
|
|---|
| 102 | GET_XTCF_TRANSFER_MODE EQU 2
|
|---|
| 103 |
|
|---|
| 104 |
|
|---|
| 105 | %endif ; XTCF_INC
|
|---|
