source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Inc/BootVars.inc@ 219

Last change on this file since 219 was 121, checked in by Tomi Tilli, 14 years ago

Changes to XTIDE Universal BIOS:

  • Endianness is now corrected for ATA device names.
  • Converted all BootVars.asm functions to macros in BootVars.inc.
  • Display library is now initialized second time before trying to display boot menu.
File size: 3.3 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Defines for BOOTVARS struct used by boot menu
3; and drive initialization.
4%ifndef BOOTVARS_INC
5%define BOOTVARS_INC
6
7
8BOOT_READ_RETRY_TIMES EQU 3
9
10
11; Boot Menu Information Table. These are generated for all XTIDE Universal
12; BIOS drives. Available only until boot is successfull.
13LEN_BOOTNFO_DRV EQU 26 ; Bytes reserved for drive name
14struc BOOTNFO
15 .twSectCnt resb 6 ; Total user addressable sectors
16 .szDrvName resb LEN_BOOTNFO_DRV+1 ; Drive name
17 resb 1 ; Alignment
18endstruc
19
20
21; Pre-boot variables. These do not exist after successfull boot to OS.
22; Segment is always 0000h, same as BDA segment
23struc BOOTVARS
24 resb 800h
25 .dwPostStack resb 4 ; 804h, POST stack when entering INT 19h
26 resb 8
27 .rgBootNfo resb 73F4h ; 80Ch, Array containing BOOTNFO structs
28 .rgbMnuStack: ; 7C00h and below, Boot Menu stack
29 .rgbAtaInfo: ; 7C00h, ATA Information for drive detection
30 .rgbBootSect resb 512 ; 7C00h, Boot sector
31endstruc
32
33
34;--------------------------------------------------------------------
35; Stores POST stack pointer to BOOTVARS.
36;
37; STORE_POST_STACK_POINTER
38; Parameters:
39; DS: BDA and Interrupt Vector segment (zero)
40; Returns:
41; Nothing
42; Corrupts registers:
43; Nothing
44;--------------------------------------------------------------------
45%macro STORE_POST_STACK_POINTER 0
46 mov [BOOTVARS.dwPostStack], sp
47 mov [BOOTVARS.dwPostStack+2], ss
48%endmacro
49
50
51;--------------------------------------------------------------------
52; Initializes stack for boot menu usage.
53; POST stack is not large enough when DPTs are stored to 30:0h.
54;
55; Note regarding LOAD_BDA_SEGMENT_TO: If you force the use of SP
56; then you also have to unconditionally enable the CLI/STI pair.
57; The reason for this is that only some buggy 808x CPU:s need the
58; CLI/STI instruction pair when changing stacks. Other CPU:s disable
59; interrupts automatically when SS is modified for the duration of
60; the immediately following instruction to give time to change SP.
61;
62; SWITCH_TO_BOOT_MENU_STACK
63; Parameters:
64; Nothing
65; Returns:
66; SS:SP: Pointer to top of Boot Menu stack
67; Corrupts registers:
68; Nothing
69;--------------------------------------------------------------------
70%macro SWITCH_TO_BOOT_MENU_STACK 0
71%ifndef USE_186
72 cli ; Disable interrupts
73%endif
74 LOAD_BDA_SEGMENT_TO ss, sp
75 mov sp, BOOTVARS.rgbMnuStack ; Load offset to stack
76%ifndef USE_186
77 sti ; Enable interrupts
78%endif
79%endmacro
80
81
82;--------------------------------------------------------------------
83; Restores SS and SP to initial boot loader values.
84;
85; Before doing any changes, see the note regarding
86; LOAD_BDA_SEGMENT_TO in BootVars_SwitchToBootMenuStack
87;
88; SWITCH_BACK_TO_POST_STACK
89; Parameters:
90; Nothing
91; Returns:
92; SS:SP: Ptr to POST stack
93; Corrupts registers:
94; Nothing
95;--------------------------------------------------------------------
96%macro SWITCH_BACK_TO_POST_STACK 0
97%ifndef USE_386
98 cli ; Disable interrupts
99 LOAD_BDA_SEGMENT_TO ss, sp
100 mov sp, [ss:BOOTVARS.dwPostStack]
101 mov ss, [ss:BOOTVARS.dwPostStack+2]
102 sti ; Enable interrupts
103%else
104 LOAD_BDA_SEGMENT_TO ss, sp
105 lss sp, [ss:BOOTVARS.dwPostStack]
106%endif
107%endmacro
108
109
110%endif ; BOOTVARS_INC
Note: See TracBrowser for help on using the repository browser.